Help Center/ Huawei Qiankun CloudService/ More Documents/ Device Alarm Handling/ V200 LSW Alarms/ ALM-3276800116 Jam of station is detected notify
Updated on 2024-01-25 GMT+08:00

ALM-3276800116 Jam of station is detected notify

Description

WLAN/4/STA_INTERFERENCE: OID [OID] Jam of station is detected notify.(APMAC=[OPAQUE], RadioID=[INTEGER], APName=[OCTET], APID=[INTEGER])

STA interference was detected.

Attribute

Alarm ID

Alarm Severity

Alarm Type

3276800116

Warning

Equipment alarm

Parameters

Name

Meaning

OID

Indicates the MIB object ID of the alarm.

APMAC

Indicates the MAC address of an AP.

RadioID

Indicates the radio ID.

APName

Indicates the AP name.

APID

Indicates the AP ID.

Impact on the System

If the number of interfering STAs exceeds the alarm threshold, the AP service performance is degraded.

Possible Causes

The number of interfering STAs exceeded the alarm threshold.

Procedure

  1. Run the display radio-2g-profile { all | name profile-name } and display radio-5g-profile { all | name profile-name } commands to view the value of Station interference threshold and check whether the alarm threshold for STA interference is configured properly. It is recommended that you set the alarm threshold for STA interference to 32.

    • If so, go to Step 3.
    • If not, go to Step 2.

  2. Run the interference station threshold command to set a proper alarm threshold for STA interference. Then, check whether the alarm persists.

    • If so, go to Step 3.
    • If not, go to Step 5.

  3. Keep the AP away from the STAs that cause interference to decrease the STA interference to be lower than the alarm threshold. Then, check whether the alarm persists.

    • If so, go to Step 4.
    • If not, go to Step 5.

  4. Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
  5. End.

Related Information

None