ALM-303046939 All Functions of the Fan Module Failed
Description
WLAN/4/AP_FAN_INVALID:OID [OID] All functions of the fan module failed. (APMAC=[OPAQUE], APName=[STRING], ApFanIndex=[INTEGER], ApEntityPhysicalName=[OCTET], APID=[INTEGER])
The alarm is generated when fans become faulty.
Only the AD9430DN-24 and AD9431DN-24X support this object.
Attribute
Alarm ID |
Alarm Severity |
Alarm Type |
---|---|---|
303046939 |
Warning |
equipmentAlarm |
Parameters
Name |
Meaning |
---|---|
OID |
Indicates the MIB object ID of the alarm. |
APMAC |
Indicates the AP's MAC address. |
APName |
Indicates the AP name. |
ApFanIndex |
Indicates the interface index of the AP fan. |
ApEntityPhysicalName |
Indicates the AP interface name. |
APID |
Indicates the AP ID. |
Impact on the System
The temperature of boards becomes high.
Possible Causes
Fans are faulty.
Procedure
- Run the display fan command on AD9430DN-24 or AD9431DN-24X to check the fan status. Check whether the fan tray is registered and the fan speed is zero.
- If the fan tray is not registered, remove and install the fan tray.
- If the fan speed is zero, replace the fan.
If the fault persists, contact technical support personnel.
Related Information
None
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot