Help Center/ Huawei Qiankun CloudService/ More Documents/ Device Alarm Handling/ V300 AR Alarms/ ALM-4289601648 RDB file recovery
Updated on 2024-01-25 GMT+08:00
View PDF
Share

ALM-4289601648 RDB file recovery

Description

CFMY/4/CFMY_RDB_RECOVERY: OID [oid] The RDB is recovery, the possible cause is that the device is powered off or the flash is damaged.

The RDB is recovery, the possible cause is that the device is powered off or the flash is damaged.

Attribute

Alarm ID

OID

Alarm Severity

Alarm Type

4289601648

1.3.6.1.4.1.2011.5.25.19.2.41

Minor

Communication alarm

Parameters

Name

Meaning

oid

Indicates the MIB object ID of the alarm.

Impact on the System

The configurations delivered last time from the controller cannot be restored.

Possible Causes

The RDB file may be damaged due to power failure or the flash memory may be damaged.

Procedure

  1. Run the display reset-reason [slotslot-id] command to check the reset cause.
  2. Check whether the flash memory of the device is damaged.

Clearing

After the fault is rectified, the system clears this alarm, removing the need to manually clear it. This alarm will not be displayed on the Current Alarms page.

Parent topic: V300 AR Alarms