Help Center/ Huawei Qiankun CloudService/ More Documents/ Device Alarm Handling/ V600 Device Alarms/ LSW Alarms/ ALM-234102786 hwMaxUclGroupIpNumAlarm
Updated on 2024-01-25 GMT+08:00
View PDF
Share

ALM-234102786 hwMaxUclGroupIpNumAlarm

Description

The number of dynamic ucl-group IPs is reaching the max. (CurrentNum=[CurrentNum], Threshold=[Threshold]%, ProcessName=[ProcessName])

The number of dynamic UCL group IPs reached the maximum value.

Attribute

Alarm ID

OID

Alarm Severity

Alarm Type

234102786

1.3.6.1.4.1.2011.5.2.2.2.0.124

Warning

Quality of service alarm

Parameters

Name

Meaning

CurrentNum

Indicates the current number of ucl-group ips.

Threshold

Indicates the percentage of ucl-group ips against the spec.

ProcessName

Process Name.

Impact on the System

None

Possible Causes

The number of UCL-group IPs reached the upper alarm threshold.

Procedure

  1. Run the display ucl-group all command to check whether the number of UCL-group IPs exceeds the upper threshold.
    • If so, plan UCL groups properly.
    • If not, no action is required.
  2. If the fault persists, contact technical support.

Parent topic: LSW Alarms