批量创建后端服务器
功能介绍
在指定pool下批量创建后端服务器。一次最多创建200个。
调用方法
请参见如何调用API。
URI
POST /v3/{project_id}/elb/pools/{pool_id}/members/batch-add
参数 |
是否必选 |
参数类型 |
描述 |
---|---|---|---|
pool_id |
是 |
String |
参数解释:后端服务器组ID。 |
project_id |
是 |
String |
参数解释:项目ID。 |
请求参数
参数 |
是否必选 |
参数类型 |
描述 |
---|---|---|---|
X-Auth-Token |
是 |
String |
参数解释:IAM鉴权Token。 |
参数 |
是否必选 |
参数类型 |
描述 |
---|---|---|---|
members |
是 |
Array of BatchCreateMembersOption objects |
后端服务器对象。 |
参数 |
是否必选 |
参数类型 |
描述 |
---|---|---|---|
name |
否 |
String |
后端服务器名称。 |
address |
是 |
String |
后端服务器的对应的IP地址,这个IP必须在subnet_cidr_id字段的子网网段中。例如:192.168.3.11。 subnet_cidr_id为空代表添加跨VPC后端,此时address必须为ipv4地址。 |
protocol_port |
是 |
Integer |
后端服务器业务端口。
说明:
在开启端口透传的pool下创建member传该字段不生效,可不传该字段。 |
subnet_cidr_id |
否 |
String |
后端服务器所在的子网,可以是IPv4或IPv6子网。若是IPv4子网,使用对应子网的子网ID(neutron_subnet_id);若是IPv6子网,使用对应子网的网络ID(neutron_network_id)。 ipv4子网的子网ID可以通过GET https://{VPC_Endpoint}/v1/{project_id}/subnets 响应参数中的neutron_subnet_id得到 ipv6子网的网络ID可以通过GET https://{VPC_Endpoint}/v1/{project_id}/subnets 响应参数中的neutron_network_id得到 使用说明:
|
weight |
否 |
Integer |
后端服务器的权重,请求将根据pool配置的负载均衡算法和后端服务器的权重进行负载分发。 权重值越大,分发的请求越多。权重为0的后端不再接受新的请求。 取值:0-100,默认1。 使用说明:若所在pool的lb_algorithm取值为SOURCE_IP或QUIC_CID,该字段无效。 |
响应参数
状态码: 201
参数 |
参数类型 |
描述 |
---|---|---|
request_id |
String |
请求ID。 注:自动生成 。 |
members |
Array of BatchMember objects |
后端服务器对象列表。 |
参数 |
参数类型 |
描述 |
---|---|---|
id |
String |
后端服务器ID。
说明:
说明: 此处并非ECS服务器的ID,而是ELB为绑定的后端服务器自动生成的member ID。 |
name |
String |
后端服务器名称。 |
project_id |
String |
后端服务器所在的项目ID。 |
admin_state_up |
Boolean |
后端服务器的管理状态。 取值:true、false。 虽然创建、更新请求支持该字段,但实际取值决定于后端服务器对应的弹性云服务器是否存在。若存在,该值为true,否则,该值为false。 |
subnet_cidr_id |
String |
后端服务器所在的子网,可以是IPv4或IPv6子网。若是IPv4子网,使用对应子网的子网ID(neutron_subnet_id);若是IPv6子网,使用对应子网的网络ID(neutron_network_id)。 ipv4子网的子网ID可以通过GET https://{VPC_Endpoint}/v1/{project_id}/subnets 响应参数中的neutron_subnet_id得到 ipv6子网的网络ID可以通过GET https://{VPC_Endpoint}/v1/{project_id}/subnets 响应参数中的neutron_network_id得到 使用说明:
|
protocol_port |
Integer |
后端服务器业务端口。
说明:
在开启端口透传的pool下创建member传该字段不生效,可不传该字段。 |
weight |
Integer |
后端服务器的权重,请求将根据pool配置的负载均衡算法和后端服务器的权重进行负载分发。 权重值越大,分发的请求越多。权重为0的后端不再接受新的请求。 取值:0-100,默认1。 使用说明:
|
address |
String |
后端服务器对应的IP地址。 使用说明:
|
operating_status |
String |
后端服务器的健康状态。 取值:
|
status |
Array of MemberStatus objects |
后端服务器监听器粒度的的健康状态。 若绑定的监听器在该字段中,则以该字段中监听器对应的operating_stauts为准。 若绑定的监听器不在该字段中,则以外层的operating_status为准。 |
member_type |
String |
后端服务器的类型。 取值:
|
instance_id |
String |
member关联的实例ID,空表示跨VPC场景的member。 |
port_id |
String |
IP地址对应的VPC port ID |
ret_status |
String |
当前后端服务器创建结果状态。 取值:
|
created_at |
String |
创建时间。格式:yyyy-MM-dd'T'HH:mm:ss'Z',UTC时区。 注意:独享型实例的历史数据以及共享型实例下的资源,不返回该字段。 |
updated_at |
String |
更新时间。格式:yyyy-MM-dd'T'HH:mm:ss'Z',UTC时区。 注意:独享型实例的历史数据以及共享型实例下的资源,不返回该字段。 |
请求示例
批量创建后端服务器。
POST https://{ELB_Endpoint}/v3/04dd36f964000fe22f9ac00bc85b1a1d/elb/pools/04a9bc65-b75b-478d-b4d6-e693bb61dd35/members/batch-add { "members" : [ { "name" : "lzs_batch_member1", "weight" : 1, "address" : "192.168.0.48", "protocol_port" : 8080, "subnet_cidr_id" : "61da8098-954b-4809-bc5a-b99ccef8a398" }, { "name" : "lzs_batch_member2", "weight" : 1, "address" : "192.168.0.49", "protocol_port" : 8080, "subnet_cidr_id" : "61da8098-954b-4809-bc5a-b99ccef8a398" } ] }
响应示例
状态码: 201
操作正常返回。
{ "request_id" : "b5d8bb34d28f3e47b352c14419e8fe04", "members" : [ { "weight" : 1, "admin_state_up" : false, "project_id" : "04dd36f964000fe22f9ac00bc85b1a1d", "address" : "192.168.0.48", "protocol_port" : 8080, "id" : "9346ad28-6971-456a-9711-2917d023930a", "operating_status" : "OFFLINE", "instance_id" : "", "member_type" : "instance", "port_id" : "", "name" : "batch_member1", "subnet_cidr_id" : "61da8098-954b-4809-bc5a-b99ccef8a398", "ret_status" : "successful" }, { "weight" : 1, "admin_state_up" : false, "project_id" : "04dd36f964000fe22f9ac00bc85b1a1d", "address" : "192.168.0.49", "protocol_port" : 8080, "id" : "94548801-1023-452f-bcf7-6174e77cb772", "operating_status" : "OFFLINE", "instance_id" : "", "member_type" : "instance", "port_id" : "", "name" : "batch_member2", "subnet_cidr_id" : "61da8098-954b-4809-bc5a-b99ccef8a398", "ret_status" : "successful" } ] }
SDK代码示例
SDK代码示例如下。
批量创建后端服务器。
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 |
package com.huaweicloud.sdk.test; import com.huaweicloud.sdk.core.auth.ICredential; import com.huaweicloud.sdk.core.auth.BasicCredentials; import com.huaweicloud.sdk.core.exception.ConnectionException; import com.huaweicloud.sdk.core.exception.RequestTimeoutException; import com.huaweicloud.sdk.core.exception.ServiceResponseException; import com.huaweicloud.sdk.elb.v3.region.ElbRegion; import com.huaweicloud.sdk.elb.v3.*; import com.huaweicloud.sdk.elb.v3.model.*; import java.util.List; import java.util.ArrayList; public class BatchCreateMembersSolution { public static void main(String[] args) { // The AK and SK used for authentication are hard-coded or stored in plaintext, which has great security risks. It is recommended that the AK and SK be stored in ciphertext in configuration files or environment variables and decrypted during use to ensure security. // In this example, AK and SK are stored in environment variables for authentication. Before running this example, set environment variables CLOUD_SDK_AK and CLOUD_SDK_SK in the local environment String ak = System.getenv("CLOUD_SDK_AK"); String sk = System.getenv("CLOUD_SDK_SK"); String projectId = "{project_id}"; ICredential auth = new BasicCredentials() .withProjectId(projectId) .withAk(ak) .withSk(sk); ElbClient client = ElbClient.newBuilder() .withCredential(auth) .withRegion(ElbRegion.valueOf("<YOUR REGION>")) .build(); BatchCreateMembersRequest request = new BatchCreateMembersRequest(); request.withPoolId("{pool_id}"); BatchCreateMembersRequestBody body = new BatchCreateMembersRequestBody(); List<BatchCreateMembersOption> listbodyMembers = new ArrayList<>(); listbodyMembers.add( new BatchCreateMembersOption() .withName("lzs_batch_member1") .withAddress("192.168.0.48") .withProtocolPort(8080) .withSubnetCidrId("61da8098-954b-4809-bc5a-b99ccef8a398") .withWeight(1) ); listbodyMembers.add( new BatchCreateMembersOption() .withName("lzs_batch_member2") .withAddress("192.168.0.49") .withProtocolPort(8080) .withSubnetCidrId("61da8098-954b-4809-bc5a-b99ccef8a398") .withWeight(1) ); body.withMembers(listbodyMembers); request.withBody(body); try { BatchCreateMembersResponse response = client.batchCreateMembers(request); System.out.println(response.toString()); } catch (ConnectionException e) { e.printStackTrace(); } catch (RequestTimeoutException e) { e.printStackTrace(); } catch (ServiceResponseException e) { e.printStackTrace(); System.out.println(e.getHttpStatusCode()); System.out.println(e.getRequestId()); System.out.println(e.getErrorCode()); System.out.println(e.getErrorMsg()); } } } |
批量创建后端服务器。
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 |
# coding: utf-8 import os from huaweicloudsdkcore.auth.credentials import BasicCredentials from huaweicloudsdkelb.v3.region.elb_region import ElbRegion from huaweicloudsdkcore.exceptions import exceptions from huaweicloudsdkelb.v3 import * if __name__ == "__main__": # The AK and SK used for authentication are hard-coded or stored in plaintext, which has great security risks. It is recommended that the AK and SK be stored in ciphertext in configuration files or environment variables and decrypted during use to ensure security. # In this example, AK and SK are stored in environment variables for authentication. Before running this example, set environment variables CLOUD_SDK_AK and CLOUD_SDK_SK in the local environment ak = os.environ["CLOUD_SDK_AK"] sk = os.environ["CLOUD_SDK_SK"] projectId = "{project_id}" credentials = BasicCredentials(ak, sk, projectId) client = ElbClient.new_builder() \ .with_credentials(credentials) \ .with_region(ElbRegion.value_of("<YOUR REGION>")) \ .build() try: request = BatchCreateMembersRequest() request.pool_id = "{pool_id}" listMembersbody = [ BatchCreateMembersOption( name="lzs_batch_member1", address="192.168.0.48", protocol_port=8080, subnet_cidr_id="61da8098-954b-4809-bc5a-b99ccef8a398", weight=1 ), BatchCreateMembersOption( name="lzs_batch_member2", address="192.168.0.49", protocol_port=8080, subnet_cidr_id="61da8098-954b-4809-bc5a-b99ccef8a398", weight=1 ) ] request.body = BatchCreateMembersRequestBody( members=listMembersbody ) response = client.batch_create_members(request) print(response) except exceptions.ClientRequestException as e: print(e.status_code) print(e.request_id) print(e.error_code) print(e.error_msg) |
批量创建后端服务器。
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 |
package main import ( "fmt" "github.com/huaweicloud/huaweicloud-sdk-go-v3/core/auth/basic" elb "github.com/huaweicloud/huaweicloud-sdk-go-v3/services/elb/v3" "github.com/huaweicloud/huaweicloud-sdk-go-v3/services/elb/v3/model" region "github.com/huaweicloud/huaweicloud-sdk-go-v3/services/elb/v3/region" ) func main() { // The AK and SK used for authentication are hard-coded or stored in plaintext, which has great security risks. It is recommended that the AK and SK be stored in ciphertext in configuration files or environment variables and decrypted during use to ensure security. // In this example, AK and SK are stored in environment variables for authentication. Before running this example, set environment variables CLOUD_SDK_AK and CLOUD_SDK_SK in the local environment ak := os.Getenv("CLOUD_SDK_AK") sk := os.Getenv("CLOUD_SDK_SK") projectId := "{project_id}" auth := basic.NewCredentialsBuilder(). WithAk(ak). WithSk(sk). WithProjectId(projectId). Build() client := elb.NewElbClient( elb.ElbClientBuilder(). WithRegion(region.ValueOf("<YOUR REGION>")). WithCredential(auth). Build()) request := &model.BatchCreateMembersRequest{} request.PoolId = "{pool_id}" nameMembers:= "lzs_batch_member1" subnetCidrIdMembers:= "61da8098-954b-4809-bc5a-b99ccef8a398" weightMembers:= int32(1) nameMembers1:= "lzs_batch_member2" subnetCidrIdMembers1:= "61da8098-954b-4809-bc5a-b99ccef8a398" weightMembers1:= int32(1) var listMembersbody = []model.BatchCreateMembersOption{ { Name: &nameMembers, Address: "192.168.0.48", ProtocolPort: int32(8080), SubnetCidrId: &subnetCidrIdMembers, Weight: &weightMembers, }, { Name: &nameMembers1, Address: "192.168.0.49", ProtocolPort: int32(8080), SubnetCidrId: &subnetCidrIdMembers1, Weight: &weightMembers1, }, } request.Body = &model.BatchCreateMembersRequestBody{ Members: listMembersbody, } response, err := client.BatchCreateMembers(request) if err == nil { fmt.Printf("%+v\n", response) } else { fmt.Println(err) } } |
更多编程语言的SDK代码示例,请参见API Explorer的代码示例页签,可生成自动对应的SDK代码示例。
状态码
状态码 |
描述 |
---|---|
201 |
操作正常返回。 |
错误码
请参见错误码。