Help Center/ MapReduce Service/ User Guide/ MRS Cluster O&M/ MRS Cluster Alarm Handling Reference/ ALM-20002 Hue Service Unavailable
Updated on 2024-09-23 GMT+08:00
View PDF
Share

ALM-20002 Hue Service Unavailable

Description

This alarm is generated when the Hue service is unavailable. The system checks the Hue service status every 60 seconds.

This alarm is cleared when the Hue service is normal.

Attribute

Alarm ID

Alarm Severity

Automatically Cleared

20002

Critical

Yes

Parameters

Name

Meaning

Source

Specifies the cluster for which the alarm is generated.

ServiceName

Specifies the service for which the alarm is generated.

RoleName

Specifies the role for which the alarm is generated.

HostName

Specifies the host for which the alarm is generated.

Impact on the System

Users cannot perform interactive analysis and data processing with MRS on the Hue UI.

Possible Causes

  • The internal KrbServer service on which the Hue service depends is abnormal.
  • The internal DBService service on which the Hue service depends is abnormal.
  • The network connection to the DBService is abnormal.

Procedure

Check whether the KrbServer is abnormal.

  1. On the FusionInsight Manager home page, choose Cluster > Name of the desired cluster > Services. In the service list, check whether the KrbServer running status is Normal.

    • If yes, go to 4.
    • If no, go to 2.

  2. Restart the KrbServer service.
  3. Wait several minutes, and check whether Hue Service Unavailable is cleared.

    • If yes, no further action is required.
    • If no, go to 4.

Check whether the DBService is abnormal.

  1. On the FusionInsight Manager home page, choose Cluster > Name of the desired cluster > Services.
  2. In the service list, check whether the DBService running status is Normal.

    • If yes, go to 8.
    • If no, go to 6.

  3. Restart the DBService.

    When the service is rebooted, it becomes unavailable and can disrupt business operations.

  4. Wait several minutes, and check whether Hue Service Unavailable is cleared.

    • If yes, no further action is required.
    • If no, go to 8.

Check whether the network connection to the DBService is normal.

  1. Choose Cluster > Name of the desired cluster > Services > Hue > Instance, record the IP address of the active Hue.
  2. Log in to the active Hue.
  3. Run the ping command to check whether communication between the host that runs the active Hue and the hosts that run the DBService is normal. (Obtain the IP addresses of the hosts that run the DBService in the same way as that for obtaining the IP address of the active Hue.)

    • If yes, go to 13.
    • If no, go to 11.

  4. Contact the administrator to restore the network.
  5. Wait several minutes, and check whether Hue Service Unavailable is cleared.

    • If yes, no further action is required.
    • If no, go to 13.

Collect fault information.

  1. On FusionInsight Manager, choose O&M > Log > Download.
  2. Select the following nodes in the required cluster from the Service drop-down list:

    • Hue
    • Controller

  3. Click in the upper right corner, and set Start Date and End Date for log collection to 10 minutes ahead of and after the alarm generation time, respectively. Then, click Download.
  1. Contact the O&M personnel and send the collected logs.

Alarm Clearing

After the fault is rectified, the system automatically clears this alarm.

Related Information

None