Adding an HTTPS Listener
Scenarios
You can add an HTTPS listener if you require encrypted transmission. Load balancers decrypt HTTPS requests before routing them to backend servers. Once the servers process the requests, they send them back to the load balancers for encryption. Finally, the load balancers send the encrypted requests to the clients.
When you add an HTTPS listener, ensure that the subnet of the load balancer has sufficient IP addresses. If the IP addresses are insufficient, add more subnets on the summary page of the load balancer. After you select a subnet, ensure that ACL rules are not configured for this subnet. If rules are configured, request packets may not be allowed.
Notes and Constraints
- If the listener protocol is HTTPS, the backend protocol can be HTTP or HTTPS.
- If you only select network load balancing (TCP/UDP) for your dedicated load balancer, you cannot add an HTTPS listener to this load balancer.
Procedure
- Go to the load balancer list page.
- On the displayed page, locate the load balancer and click its name.
- Under Listeners, click Add Listener. Configure the parameters based on Table 1.
Table 1 Parameters for configuring an HTTPS listener Parameter
Description
Name
Specifies the listener name.
Frontend Protocol
Specifies the protocol that will be used by the load balancer to receive requests from clients.
Select HTTPS.
Frontend Port
Specifies the port that will be used by the load balancer to receive requests from clients.
The port number ranges from 1 to 65535.
SSL Authentication
Specifies how you want the clients and backend servers to be authenticated.
There are two options: One-way authentication or Mutual authentication.
- If only server authentication is required, select One-way authentication.
- If you want the clients and the load balancer to authenticate each other, select Mutual authentication. Only authenticated clients will be allowed to access the load balancer.
CA Certificate
Specifies the certificate that will be used by the backend server to authenticate the client when SSL Authentication is set to Mutual authentication.
A CA certificate is issued by a certificate authority (CA) and used to verify the certificate issuer. If HTTPS mutual authentication is required, HTTPS connections can be established only when the client provides a certificate issued by a specific CA.
For details, see Adding a Certificate.
Server Certificate
Specifies the certificate that will be used by the backend server to authenticate the client when HTTPS is used as the frontend protocol.
The server certificate is used for SSL handshake negotiation to authenticate clients and ensure encrypted transmission.
For details, see Adding a Certificate.
Enable SNI
Specifies whether to enable SNI when HTTPS is used as the frontend protocol. SNI can be used when a server uses multiple domain names and certificates.
This allows the client to submit the domain name information while sending an SSL handshake request. After the load balancer receives the request, the load balancer queries the corresponding certificate based on the domain name and returns it to the client. If no certificate is found, the load balancer will return the default certificate. For details, see SNI Certificate.
SNI Certificate
Specifies the certificate associated with the domain name when the frontend protocol is HTTPS and SNI is enabled.
Select an existing certificate or create one.
For details, see Adding a Certificate.
Access Control
Specifies how access to the listener is controlled. For details, see What Is Access Control? The following options are available:
- All IP addresses
- Blacklist
- Whitelist
IP Address Group
Specifies the IP address group associated with a whitelist or blacklist. If there is no IP address group, create one first. For more information, see IP Address Group.
Transfer Client IP Address
Specifies whether to transmit IP addresses of the clients to backend servers.
This function is enabled for dedicated load balancers by default and cannot be disabled.
Advanced Forwarding
Specifies whether to enable the advanced forwarding policy. You can add advanced forwarding policies to HTTP or HTTPS listeners to forward requests to different backend server groups.
For more information, see Advanced Forwarding.
Advanced Settings
Security Policy
Specifies the security policy you can use if you select HTTPS as the frontend protocol. For more information, see TLS Security Policy.
HTTP/2
Specifies whether you want to use HTTP/2 if you select HTTPS for Frontend Protocol. For details, see HTTP/2.
HTTP Headers
You can enable the following options as needed.
- Transfer headers:
- Transfer Load Balancer EIP: transmits the EIP bound to the load balancer to backend servers through the X-Forwarded-ELB-IP header.
- Transfer Listener Port Number: transmits the port number used by the listener to backend servers through the X-Forwarded-Port header.
- Transfer Port Number in the Request: transmits the port number used by the client to backend servers through the X-Forwarded-For-Port header.
- Transfer Load Balancer ID: transmits the load balancer ID to backend servers through the X-Forwarded-ELB-ID header.
- Rewrite headers:
- Rewrite X-Forwarded-Host: rewrites the Host header of the client into the X-Forwarded-Host header and transmits it to the backend servers.
- Rewrite X-Forwarded-Proto: rewrites the listener protocol into the X-Forwarded-Proto header and transmits it to the backend servers.
- Rewrite X-Real-IP: rewrites the source IP address of the client into the X-Real-IP header and transmits it to the backend servers.
For details, see HTTP Headers.
NOTE:More HTTP headers are coming soon. See the available HTTP headers on the management console.
Data Compression
Specifies whether to enable the data compression option. If you do not enable this option, files will not be compressed.
- Brotli can compress all files.
- Gzip can be configured to compress the following content types:
text/xml text/plain text/css application/javascript application/x-javascript application/rss+xml application/atom+xml application/xml application/json.
NOTE:This option is available in certain regions. You can see which regions support this option on the console.
Idle Timeout (s)
Specifies the length of time for a connection to keep alive, in seconds. If no request is received within this period, the load balancer closes the connection and establishes a new one with the client when the next request arrives.
The idle timeout duration ranges from 0 to 4000.
Request Timeout (s)
Specifies the length of time (in seconds) that a load balancer is willing to wait for a client request to complete. The load balancer terminates the connection if a request takes too long to complete.
The request timeout duration ranges from 1 to 300.
Response Timeout (s)
Specifies the length of time (in seconds) after which the load balancer sends a 504 Gateway Timeout error to the client if the load balancer receives no response from the backend server after routing a request to the backend server and receives no response after attempting to route the same request to other backend servers.
The response timeout duration ranges from 1 to 300.
NOTE:If you have enabled sticky sessions and the backend server does not respond within the response timeout duration, the load balancer returns 504 Gateway Timeout to the clients.
Maximum New Connections per AZ
Specifies the maximum number of new connections that a listener can handle per second in each AZ.
The value ranges from 0 to 1000000. 0 indicates that the number is not limited. If the value is greater than the number defined in the load balancer specifications, the latter is used as the limit.
NOTE:This option is available in certain regions. You can see which regions support this option on the console.
Maximum Concurrent Connections per AZ
Specifies the maximum number of concurrent connections that a listener can handle per second in each AZ.
The value ranges from 0 to 1000000. 0 indicates that the number is not limited. If the value is greater than the number defined in the load balancer specifications, the latter is used as the limit.
Reducing the concurrent connection limit do not interrupt established connections.
NOTE:This option is available in certain regions. You can see which regions support this option on the console.
Tag
Adds tags to the listener. Each tag is a key-value pair, and the tag key is unique.
NOTE:This option is available in certain regions. You can see which regions support this option on the console.
Description
Provides supplementary information about the listener.
You can enter a maximum of 255 characters.
- Click Next: Configure Request Routing Policy.
- You are advised to select an existing backend server group.
- You can also click Create new to create a backend server group.
- For details about how to configure a backend server group, see Table 3.
- Click Next: Add Backend Server. Add backend servers and configure health check for the backend server group.
For details about how to add backend servers, see Backend Server Overview. For the parameters required for configuring a health check, see Table 4.
- Click Next: Confirm.
- Confirm the configurations and click Submit.
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot