Error Codes

Function

If an error occurs during API calling, a customized error message will be returned. This section describes the meaning of each status code returned by VPCEP.

Error Code Format

STATUS CODE 400

    
         {
        "error_code": "EndPoint.0002",
        "error_msg": "Parameter error."
}

Descriptions of Error Codes

An error code returned by an API does not correspond to an error message.

**Table 1** Error code descriptions
Status Code	Error Code	Error Message	Description	Solution
500	EndPoint.0001	System error. Please retry.	System error. Please retry.	Try again later. If the fault persists, contact technical support.
400	EndPoint.0002	Parameter error.	Parameter error.	Check whether the parameter is correct.
401	EndPoint.0003	Authentication failed or authentication information is invalid.	Authentication failed or authentication information is invalid.	Check whether the permission is enabled.
403	EndPoint.0004	Authentication information is incorrect or you have no permissions.	Authentication information is incorrect or you have no permissions.	Check whether the permission is enabled.
404	EndPoint.0005	The requested resource is unavailable.	The requested resource is unavailable.	Check whether input parameters are correct.
400	EndPoint.0006	Invalid limit.	Invalid limit.	Enter a correct limit.
400	EndPoint.0007	Invalid action.	Invalid action.	Enter a correct action.
400	EndPoint.0009	The remote address does not match.	The remote address does not match.	Check whether you have the access permission.
400	EndPoint.0010	Invalid offset.	Invalid offset.	Enter a correct offset.
504	EndPoint.0011	The request body is null.	The request body is null.	Enter the request body again.
504	EndPoint.0012	The request header is null.	The request header is null.	Enter a request header.
504	EndPoint.0013	The request timed out.	The request timed out.	Try again later. If the fault persists, contact technical support.
400	EndPoint.0014	Invalid project ID.	Invalid project ID.	Enter a correct project ID.
400	EndPoint.0015	Invalid specification.	Invalid specifications.	Enter correct specifications.
400	EndPoint.0016	The number of batch operated resources exceeded the limit.	The number of batch operated resources exceeded the limit.	Reduce the number of resources to be batch operated.
400	EndPoint.0017	Invalid sort_key.	Invalid sort key.	Enter a correct sort key.
400	EndPoint.0018	Invalid sort_dir.	Invalid sort DIR.	Enter a correct sort DIR.
400	EndPoint.0019	Invalid status.	Invalid status.	Enter a correct status.
400	EndPoint.0020	Invalid VPC ID.	Invalid VPC ID.	Enter a correct VPC ID.
400	EndPoint.0021	Invalid marker_id.	Invalid marker ID.	Enter a correct marker ID.
400	EndPoint.0022	The number of requests exceeded the limit. Please try later.	The number of requests exceeded the limit. Please try later.	Try again later.
400	EndPoint.0023	Invalid subnet_id.	Invalid subnet ID.	Enter a correct subnet ID.
400	EndPoint.1003	Invalid service name.	Invalid service name.	Enter a correct service name.
400	EndPoint.1004	Invalid request.	Invalid request.	Enter a correct request body.
400	EndPoint.1008	Failed to obtain the token.	Failed to obtain the token.	Contact technical support.
400	Endpoint.1018	Quota exceeded.	Quota exceeded.	Contact technical support.
400	EndPoint.1019	Invalid route table ID.	Invalid route table ID.	Enter a correct route table ID.
400	EndPoint.2001	The VPC does not exist.	The VPC does not exist.	Enter a correct VPC ID for the current tenant.
400	EndPoint.2002	The request input parameter is empty.	The request input parameter is empty.	Please input a correct parameter.
400	EndPoint.2003	The endpoint service does not exist.	The VPC endpoint service does not exist.	Enter a VPC endpoint service.
400	EndPoint.2004	The endpoint service is unavailable.	The VPC endpoint service is unavailable.	Try again later. If the fault persists, contact technical support.
404	EndPoint.2006	The requested endpoint does not exist.	The requested VPC endpoint does not exist.	Enter a correct VPC endpoint.
404	EndPoint.2007	The endpoint information does not exist.	The VPC endpoint information is unavailable.	Enter a correct VPC endpoint and check whether the endpoint is deleted.
404	EndPoint.2008	The endpoint has been deleted.	The VPC endpoint has been deleted.	Check whether the VPC endpoint is deleted.
400	EndPoint.2009	The specification information does not exist.	The specification is unavailable.	Enter correct specifications.
400	EndPoint.2010	The input parameter subnet ID is empty.	The subnet ID is left blank.	Enter a valid subnet ID.
400	EndPoint.2011	The input parameter VPC ID is empty.	The VPC ID is left blank.	Enter a valid VPC ID.
400	EndPoint.2012	You have no permission to connect to the VPC endpoint service.	You have no permission to connect to the VPC endpoint service.	Check whether you have the access permission.
400	EndPoint.2013	The endpoint does not belong to the endpoint service.	The VPC endpoint does not belong to the VPC endpoint service.	Check whether the VPC endpoint is correct.
400	EndPoint.2014	The endpoint has connected to the endpoint service.	The VPC endpoint has connected to the VPC endpoint service.	Connected. You do not need to connect again.
400	EndPoint.2015	The endpoint has been frozen.	The VPC endpoint has been frozen.	Contact technical support to confirm the freezing reason.
400	EndPoint.2016	The endpoint pool IP address does not exist.	The VPC endpoint pool IP address does not exist.	Contact technical support.
400	EndPoint.2017	Invalid endpoint ID.	The ID of the VPC endpoint is invalid.	Enter a correct VPC endpoint ID.
400	EndPoint.2018	The endpoint is being deleted.	The VPC endpoint is being deleted.	Select an available VPC endpoint.
400	EndPoint.2019	The endpoint is being created.	The VPC endpoint is being created.	Try again later.
400	EndPoint.2020	qrMac or sgMac does not exist.	qrMac or sgMac is not found.	Contact technical support.
400	EndPoint.2021	Failed to query the VPC.	Failed to query the VPC.	Contact technical support.
400	EndPoint.2022	Failed to create an endpoint.	Failed to create a VPC endpoint.	Contact technical support.
400	EndPoint.2023	CIDR is not found.	CIDR is not found.	Contact technical support.
400	EndPoint.2024	shadowVpc or shadowPort does not exist.	shadowVpc or shadowPort is null.	Contact technical support.
400	EndPoint.2025	The endpoint port does not exist.	The VPC endpoint port is not found.	Contact technical support.
400	EndPoint.2026	VNI is empty.	VNI is empty.	Contact technical support.
400	EndPoint.2027	Invalid action.	Invalid action.	Enter a valid action.
400	EndPoint.2028	The endpoint service port or protocol is empty.	The VPC endpoint service port or protocol is empty.	Enter a valid port number or protocol.
400	EndPoint.2029	The requested endpoint service ID is empty.	The ID of the requested VPC endpoint service is empty.	Enter a valid VPC endpoint service ID.
404	EndPoint.2030	markerId is empty.	marker_id is left blank.	Specify a valid marker_id.
400	EndPoint.2031	Only one endpoint is allowed.	Only one VPC endpoint is allowed.	A VPC endpoint service allows accepting or rejecting only one VPC endpoint.
400	EndPoint.2033	The entered parameter enable_dns is invalid.	Invalid parameter enable_dns.	Enter a valid parameter.
400	EndPoint.2034	The entered parameter enable_dns is incorrect.	The entered parameter enable_dns is incorrect.	Enter a valid parameter.
400	EndPoint.2035	The system parameter dns.enable is invalid.	System parameter dns.enable is invalid.	Contact technical support.
400	EndPoint.2037	The current network does not belong to the VPC.	The current network does not belong to the VPC.	Check whether the parameter is correct.
400	EndPoint.2038	The pool does not exist.	The resource pool is not found.	Contact technical support.
400	EndPoint.2039	The route table is being used by another VPC endpoint.	The route table is being used by another VPC endpoint.	Contact technical support.
400	EndPoint.2040	The VPC endpoint has no route table bound.	The VPC endpoint has no route table associated.	Contact technical support.
400	EndPoint.3001	Failed to create a port.	Failed to create a port.	Contact technical support.
400	EndPoint.3002	Invalid permission.	Invalid permission.	Contact technical support.
400	EndPoint.3003	Invalid port ID.	Invalid port ID.	Contact technical support.
400	EndPoint.3004	Invalid port.	Invalid port.	Contact technical support.
400	EndPoint.3005	Failed to delete the endpoint service.	Failed to delete the VPC endpoint service.	Contact technical support.
400	EndPoint.3006	The endpoint service is being used.	The VPC endpoint service is being used.	Contact technical support.
400	EndPoint.3008	The port does not exist.	The port is not found.	Contact technical support.
400	EndPoint.3009	Invalid CIDR.	Invalid CIDR.	Contact technical support.
400	EndPoint.3010	Invalid IP address.	Invalid IP address.	Enter a correct IP address.
400	EndPoint.3011	Parameter IP is not required to create an endpoint service (interface).	Parameter ip is not required to create a VPC endpoint service (interface).	Enter a correct request body.
400	EndPoint.3013	endpointService interface vlan can't have vpcId.	The request for accessing the VLAN VPC endpoint service cannot contain VPC ID information.	Enter a correct request body.
400	EndPoint.3014	endpointService interface can't have cidr.	The request for accessing the VPC endpoint service (interface) cannot contain CIDR.	Enter a correct request body.
400	EndPoint.3015	endpointService gateway vlan can't have portId.	The request for accessing the VLAN VPC endpoint service cannot contain port_id.	Enter a correct request body.
400	EndPoint.3016	endpointService gateway vlan can't have ip.	The request for accessing the VLAN VPC endpoint service cannot contain IP address information.	Enter a correct request body.
400	EndPoint.3017	Invalid CIDRs.	Invalid CIDRs.	Enter correct CIDRs.
400	EndPoint.3018	endpointService gateway vlan can't have vpcId.	The request for accessing the VLAN VPC endpoint service cannot contain VPC ID information.	Enter a correct request body.
400	EndPoint.3021	Invalid serverType.	Invalid server_type.	Specify a valid server_type.
400	EndPoint.3022	Failed to create a network.	Failed to create a network.	Contact technical support.
400	EndPoint.3023	Failed to create a subnet.	Failed to create a subnet.	Contact technical support.
400	EndPoint.3035	Invalid action.	Invalid action.	Enter a correct action.
400	EndPoint.3036	Invalid permissions.	The permission list cannot be empty.	Enter a correct request body.
400	EndPoint.3040	Failed to add a rollback task.	Failed to add a rollback task.	Contact technical support.
400	EndPoint.3042	The port ID does not belong to the current VPC.	The port ID does not belong to the current VPC.	Enter a correct request body.
400	EndPoint.3043	The service port is invalid.	Invalid service port.	Enter a correct request body.
400	EndPoint.3044	The parameter ports conflicted with ports in an existing endpoint service.	This port conflicted with the port of an existing endpoint service.	Enter a correct request body.
400	EndPoint.3045	Other properties cannot be modified in the current endpoint service state.	Modifying other properties in the current endpoint service state is not supported.	Enter a correct request body.
400	EndPoint.3046	The IP address conflicted with an existing endpoint service.	The IP address conflicted with an existing VPC endpoint service.	Enter a correct request body.
400	EndPoint.3049	The maximum number of whitelist records has been reached.	The maximum number of whitelist records has been reached.	Delete invalid whitelist records or add an asterisk (*).
400	EndPoint.3051	Endpoint service vip port id is invalid.	Invalid vip_port_id.	Specify a valid vip_port_id.
400	EndPoint.3052	portId and ip cannot be modified at the same time.	port_id and ip cannot be modified at the same time.	Enter a correct request body.
400	EndPoint.3053	vipPortId and ip cannot be modified at the same time.	vip_port_id and ip cannot be modified at the same time.	Enter a correct request body.
400	EndPoint.3054	portId or vipPortId cannot be modified.	port_id or vip_port_id cannot be modified.	Enter a correct request body.
400	EndPoint.3055	ip cannot be modified.	ip cannot be modified.	Enter a correct request body.
400	EndPoint.3056	The maximum of VPC endpoint services using the same IP address has been reached.	The maximum of VPC endpoint services supported by a backend resource has been reached.	Contact technical support.
400	EndPoint.3057	cidr cannot be modified.	CIDR cannot be modified.	Enter a correct request body.
400	EndPoint.3058	The domain name is invalid.	Invalid domain name.	Enter a correct domain name.
400	EndPoint.3059	The domain name already exists.	The domain name already exists.	Contact technical support.
400	EndPoint.3060	You have no permission to add domain names.	You have no permission to add domain names.	Contact technical support.
400	EndPoint.3061	The maximum number of domain names has reached.	The maximum number of domain names has been reached.	Contact technical support.
400	EndPoint.3062	Invalid endpoint service ID.	Invalid VPC endpoint service ID.	Enter a correct parameter.
400	EndPoint.3063	Invalid port ID.	Invalid port ID.	Enter a correct port ID.
400	EndPoint.3066	The tag cannot be empty.	The tag cannot be empty.	Enter a correct request body.
400	EndPoint.3067	The tag key cannot be duplicated.	The tag key cannot be duplicated.	Enter a correct request body.
400	EndPoint.3068	Tag keys and values should meet relevant requirements.	Tag keys and values must meet relevant requirements.	Enter a correct request body.
400	EndPoint.3069	The maximum number of tags has been reached.	The maximum number of tags has been reached.	Contact technical support.
400	EndPoint.3070	Invalid resource type.	Incorrect resource type.	Contact technical support.
400	EndPoint.3071	The tag value cannot be duplicated.	Tag values cannot be duplicated.	Contact technical support.
400	EndPoint.3072	The tag key size is invalid.	The tag key size is invalid.	Enter a correct tag key.
400	EndPoint.3073	The tag value size is invalid.	The tag value size is invalid.	Enter a correct tag value.
400	EndPoint.3074	The maximum of ports has been reached.	The maximum of port mappings has been reached.	Contact technical support.
400	EndPoint.3075	The protocol is invalid.	Invalid protocol.	Contact technical support.
400	EndPoint.3076	Invalid service name.	Invalid service name.	Enter a valid service name.
400	EndPoint.4001	Failed to query the subnet.	Failed to query the subnet.	Contact technical support.
400	EndPoint.4002	Failed to create a subnet.	Failed to create a subnet.	Contact technical support.
400	EndPoint.4003	Failed to delete the subnet.	Failed to delete the subnet.	Contact technical support.
404	EndPoint.4004	The subnet is not found.	The subnet does not exist.	Check the entered subnet ID. If the fault persists, contact technical support.
400	EndPoint.4005	Failed to query the network.	Failed to query the network.	Contact technical support.
400	EndPoint.4006	Failed to create a network.	Failed to create a network.	Contact technical support.
400	EndPoint.4007	Failed to delete the network.	Failed to delete the network.	Contact technical support.
404	EndPoint.4008	Network is unavailable.	Network is unavailable.	Contact technical support.
400	EndPoint.4009	Failed to query the port.	Failed to query the port.	Contact technical support.
400	EndPoint.4010	Failed to create a port.	Failed to create a port.	Contact technical support.
400	EndPoint.4011	Failed to delete the port.	Failed to delete the port.	Contact technical support.
404	EndPoint.4012	The port is not found.	The port is not found.	Contact technical support.
400	EndPoint.4013	Failed to query the proxy.	Failed to query the proxy.	Contact technical support.
400	EndPoint.4014	Failed to query the router.	Failed to query the router.	Contact technical support.
400	EndPoint.4015	The router is not found.	The router is not found.	Contact technical support.
400	EndPoint.4016	Failed to add an interface router.	Failed to add an interface router.	Contact technical support.
400	EndPoint.4017	Failed to delete the interface router.	Failed to delete the interface router.	Contact technical support.
400	EndPoint.4018	Failed to add an extension router.	Failed to add the extended router.	Contact technical support.
400	EndPoint.4019	Failed to delete the extension router.	Failed to delete the extended router.	Contact technical support.
400	EndPoint.4020	Failed to query Neutron L3 Agent.	Failed to query Neutron L3 Agent.	Contact technical support.
404	EndPoint.4021	Neutron L3 Agent is not found.	Neutron L3 Agent is not found.	Contact technical support.
400	EndPoint.4025	The specification is being used.	The specification is being used.	Contact technical support.
400	EndPoint.4026	Failed to query the default route table of the VPC.	Failed to query the default route table of the VPC.	Contact technical support.
400	EndPoint.4027	Failed to query route tables of the VPC.	Failed to query route tables of the VPC.	Contact technical support.
400	EndPoint.4028	Failed to add routes to the VPC's route table.	Failed to add routes to the VPC's route table.	Contact technical support.
400	EndPoint.4029	Failed to remove routes from the VPC's route table.	Failed to remove routes from the VPC's route table.	Contact technical support.
404	EndPoint.4030	The route table is not found.	The route table is not found.	Contact technical support.