Establishing Network Connectivity

Scenarios

Establish network connectivity using Direct Connect if cloud servers in your VPC need to communicate with your on-premises data center.

Procedure

1. Apply for a connection from your account manager. If you do not have an account manager, contact customer service.
2. Log in to the management console.
3. In the service list, choose Network > Direct Connect.
4. In the navigation pane on the left, choose Direct Connect > Virtual Gateways.
5. Click Create Virtual Gateway.
6. Configure the parameters.

   Table 1 Parameter description

   Parameter	Description
   Name	Specifies the virtual gateway name. The name can contain 1 to 64 characters, including letters, digits, underscores (_), hyphens (-), and periods (.).
   VPC	Specifies the VPC to be associated with the virtual gateway.
   Subnet CIDR Block	Specifies the CIDR blocks of subnets in the VPC to connect to the on-premises network.
   Description	Provides supplementary information about the virtual gateway. You can enter 0 to 128 characters.

7. Click OK.
8. In the navigation pane on the left, choose Direct Connect > Virtual Interfaces.
9. Click Create Virtual Interface.
10. Set the parameters as prompted and then click Create Now.

    Table 2 Parameter description

    Parameter	Description
    Region	Select the region of the VPC that needs to communicate with the on-premises data center.
    Name	Specifies the virtual interface name. The name can contain 1 to 64 characters, including letters, digits, underscores (_), hyphens (-), and periods (.).
    Connection	Specifies the connection with which the virtual interface is to be associated. A virtual interface can be associated with only one connection.
    Virtual Gateway	Select the virtual gateway with which the virtual interface is to be associated. A virtual interface can be associated with only one virtual gateway.
    VLAN	Specifies the virtual interface VLAN ID. You need to configure the VLAN if you create a standard connection. The VLAN for a hosted connection will be allocated by the carrier or partner. You do not need to configure the VLAN.
    Bandwidth	Specifies the virtual interface bandwidth in the unit of Mbit/s. If the selected connection is a hosted connection, the virtual interface exclusively uses the connection bandwidth.
    Local Gateway	Specifies the IP address for connecting to the cloud network.
    Remote Gateway	Specifies the IP address for connecting to your on-premises network.
    Remote Subnet	Specifies the subnets used by the on-premises network. Specifies the remote subnet using CIDR notation. You can enter a maximum of 50 subnets. Ensure that each subnet is unique and separate every two subnets with commas (,).
    Routing Mode	Specifies the routing mode. Two options are available, Static and BGP. If there are two or more connections, select BGP routing.
    BGP ASN	Specifies the autonomous system number (ASN) of the BGP peer.
    BGP MD5 Authentication Key	Specifies the MD5 password of the BGP peer.
    Description	Provides supplementary information about the virtual interface. You can enter 0 to 128 characters.