Using Flume from Scratch

Scenario

You can use Flume to import collected log information to Kafka.

Prerequisites

A streaming cluster with Kerberos authentication enabled has been created.
The Flume client has been installed on the node where logs are generated, for example, /opt/Flumeclient. For details about how to install the Flume client, see . The client directory in the following operations is only an example. Change it to the actual installation directory.
The streaming cluster can properly communicate with the node where logs are generated.

Using the Flume Client

You do not need to perform 2 to 6 for a normal cluster.

Install the client.

For details, see .
Copy the configuration file of the authentication server from the Master1 node to the Flume client installation directory/fusioninsight-flume-Flume component version number/conf directory on the node where the Flume client resides.

The full file path is ${BIGDATA_HOME}/FusionInsight_BASE_XXX/1_X_KerberosClient/etc/kdc.conf. In the preceding path, XXX indicates the product version number. X indicates a random number. Change it based on the site requirements. The file must be saved by the user who installs the Flume client, for example, user root.
Check the service IP address of any node where the Flume role is deployed.

Log in to FusionInsight Manager. For details, see Accessing FusionInsight Manager. Choose Cluster > Services > Flume > Instance. Check the service IP address of any node where the Flume role is deployed.
Copy the user authentication file from this node to the Flume client installation directory/fusioninsight-flume-Flume component version number/conf directory on the Flume client node.

The full file path is ${BIGDATA_HOME}/FusionInsight_Porter_XXX/install/FusionInsight-Flume-Flume component version number/flume/conf/flume.keytab.

In the preceding paths, XXX indicates the product version number. Change it based on the site requirements. The file must be saved by the user who installs the Flume client, for example, user root.
Copy the jaas.conf file from this node to the conf directory on the Flume client node.

The full file path is ${BIGDATA_HOME}/FusionInsight_Current/1_X_Flume/etc/jaas.conf.

In the preceding path, X indicates a random number. Change it based on the site requirements. The file must be saved by the user who installs the Flume client, for example, user root.
Log in to the Flume client node and go to the client installation directory. Run the following command to modify the file:

vi conf/jaas.conf

Change the full path of the user authentication file defined by keyTab to the Flume client installation directory/fusioninsight-flume-Flume component version number/conf saved in 4, and save the modification and exit.
Run the following command to modify the flume-env.sh configuration file of the Flume client:

vi Flume client installation directory/fusioninsight-flume-Flume component version number/conf/flume-env.sh

Add the following information after -XX:+UseCMSCompactAtFullCollection:
```
-Djava.security.krb5.conf=Flume client installation directory/fusioninsight-flume-1.9.0/conf/kdc.conf -Djava.security.auth.login.config=Flume client installation directory/fusioninsight-flume-1.9.0/conf/jaas.conf -Dzookeeper.request.timeout=120000
```
For example, "-XX:+UseCMSCompactAtFullCollection -Djava.security.krb5.conf=Flume client installation directory/fusioninsight-flume-Flume component version number/conf/kdc.conf -Djava.security.auth.login.config=Flume client installation directory/fusioninsight-flume-Flume component version number/conf/jaas.conf -Dzookeeper.request.timeout=120000"

Change Flume client installation directory to the actual installation directory. Then save and exit.
Run the following command to restart the Flume client:

cd Flume client installation directory/fusioninsight-flume-Flume component version number/bin

./flume-manage.sh restart

Example:

cd /opt/FlumeClient/fusioninsight-flume-Flume component version number/bin

./flume-manage.sh restart

Configure jobs based on actual service scenarios.

Some parameters can be configured for MRS 3.x or later on Manager. For details, see Non-Encrypted Transmission or Encrypted Transmission.

Set the parameters in the properties.properties file. The following uses SpoolDir Source+File Channel+Kafka Sink as an example.

Run the following command on the node where the Flume client is installed to configure and save a job in properties.properties (Flume client configuration file) based on service requirements by referring to Flume Service Configuration Guide:

vi Flume client installation directory/fusioninsight-flume-Flume component version number/conf/properties.properties

#########################################################################################
client.sources = static_log_source  
client.channels = static_log_channel 
client.sinks = kafka_sink
#########################################################################################
#LOG_TO_HDFS_ONLINE_1

client.sources.static_log_source.type = spooldir
client.sources.static_log_source.spoolDir = Monitoring directory
client.sources.static_log_source.fileSuffix = .COMPLETED
client.sources.static_log_source.ignorePattern = ^$
client.sources.static_log_source.trackerDir = Metadata storage path during transmission
client.sources.static_log_source.maxBlobLength = 16384
client.sources.static_log_source.batchSize = 51200
client.sources.static_log_source.inputCharset = UTF-8
client.sources.static_log_source.deserializer = LINE
client.sources.static_log_source.selector.type = replicating
client.sources.static_log_source.fileHeaderKey = file
client.sources.static_log_source.fileHeader = false
client.sources.static_log_source.basenameHeader = true
client.sources.static_log_source.basenameHeaderKey = basename
client.sources.static_log_source.deletePolicy = never

client.channels.static_log_channel.type = file
client.channels.static_log_channel.dataDirs = Data cache path. Multiple paths, separated by commas (,), can be configured to improve performance.
client.channels.static_log_channel.checkpointDir = Checkpoint storage path
client.channels.static_log_channel.maxFileSize = 2146435071
client.channels.static_log_channel.capacity = 1000000
client.channels.static_log_channel.transactionCapacity = 612000
client.channels.static_log_channel.minimumRequiredSpace = 524288000

client.sinks.kafka_sink.type = org.apache.flume.sink.kafka.KafkaSink
client.sinks.kafka_sink.kafka.topic = Topic to which data is written, for example, flume_test
client.sinks.kafka_sink.kafka.bootstrap.servers = XXX.XXX.XXX.XXX:Kafka port number,XXX.XXX.XXX.XXX:Kafka port number,XXX.XXX.XXX.XXX:Kafka port number
client.sinks.kafka_sink.flumeBatchSize = 1000
client.sinks.kafka_sink.kafka.producer.type = sync
client.sinks.kafka_sink.kafka.security.protocol = SASL_PLAINTEXT
client.sinks.kafka_sink.kafka.kerberos.domain.name = Kafka domain name. This parameter is mandatory for a security cluster, for example, hadoop.xxx.com.
client.sinks.kafka_sink.requiredAcks = 0

client.sources.static_log_source.channels = static_log_channel
client.sinks.kafka_sink.channel = static_log_channel

client.sinks.kafka_sink.kafka.topic: Topic to which data is written. If the topic does not exist in Kafka, it is automatically created by default.
client.sinks.kafka_sink.kafka.bootstrap.servers: List of Kafka Brokers, which are separated by commas (,). By default, the port is 21007 for a security cluster and 9092 for a normal cluster.
client.sinks.kafka_sink.kafka.security.protocol: The value is SASL_PLAINTEXT for a security cluster and PLAINTEXT for a normal cluster.
client.sinks.kafka_sink.kafka.kerberos.domain.name:
You do not need to set this parameter for a normal cluster. For a security cluster, the value of this parameter is the value of kerberos.domain.name in the Kafka cluster.

In the preceding paths, X indicates a random number. Change it based on site requirements. The file must be saved by the user who installs the Flume client, for example, user root.

After the parameters are set and saved, the Flume client automatically loads the content configured in properties.properties. When new log files are generated by spoolDir, the files are sent to Kafka producers and can be consumed by Kafka consumers. For details, see Managing Messages in Kafka Topics.