Querying Load Balancers in the Recycle Bin
Function
This API is used to query load balancers in the recycle bin.
Constraints
This API has the following constraints:
-
Parameters marker, limit, and page_reverse are used for pagination query.
-
Parameters marker and page_reverse take effect only when they are used together with parameter limit.
Calling Method
For details, see Calling APIs.
URI
GET /v3/{project_id}/elb/recycle-bin/loadbalancers
Parameter |
Mandatory |
Type |
Description |
---|---|---|---|
project_id |
Yes |
String |
Definition: Specifies the project ID. For details about how to obtain a project ID, see Obtaining a Project ID. Constraints: N/A Range: The value can contain a maximum of 32 characters, including digits and lowercase letters. Default value: N/A |
Parameter |
Mandatory |
Type |
Description |
---|---|---|---|
marker |
No |
String |
Definition: Specifies the ID of the last record on the previous page. Constraints:
Range: N/A Default value: N/A |
limit |
No |
Integer |
Definition: Specifies the number of records returned on each page. Constraints: N/A Range: 0 to 2000 Default value: 2000 |
page_reverse |
No |
Boolean |
Definition: Specifies whether to use reverse query. Constraints:
Range:
Default value: false |
id |
No |
Array of strings |
Specifies the load balancer ID. Multiple IDs can be used for query in the format of id=xxx&id=xxx. |
name |
No |
Array of strings |
Specifies the load balancer name. Multiple names can be used for query in the format of name=xxx&name=xxx. |
description |
No |
Array of strings |
Provides supplementary information about the load balancer. Multiple descriptions can be used for query in the format of description=xxx&description=xxx. |
admin_state_up |
No |
Boolean |
Definition: Specifies whether the load balancer is enabled. Range:
|
operating_status |
No |
Array of strings |
Specifies the operating status of the load balancer. Value options:
Multiple operating statuses can be used for query in the format of operating_status=xxx&operating_status=xxx. |
guaranteed |
No |
Boolean |
Specifies whether the load balancer is a dedicated load balancer.
|
vpc_id |
No |
Array of strings |
Specifies the ID of the VPC where the load balancer resides. Multiple IDs can be used for query in the format of vpc_id=xxx&vpc_id=xxx. |
vip_port_id |
No |
Array of strings |
Specifies the ID of the port bound to the private IPv4 address of the load balancer. Multiple IDs can be used for query in the format of vip_port_id=xxx&vip_port_id=xxx. |
vip_address |
No |
Array of strings |
Specifies the IPv4 private IP address of the load balancer. Multiple IP addresses can be used for query in the format of vip_address=xxx&vip_address=xxx. |
vip_subnet_cidr_id |
No |
Array of strings |
Specifies the ID of the IPv4 subnet where the load balancer resides. Multiple IDs can be used for query in the format of vip_subnet_cidr_id=xxx&vip_subnet_cidr_id=xxx. |
ipv6_vip_port_id |
No |
Array of strings |
Specifies the ID of the port bound to the IPv6 address of the load balancer. Multiple ports can be used for query in the format of ipv6_vip_port_id=xxx&ipv6_vip_port_id=xxx. |
ipv6_vip_address |
No |
Array of strings |
Specifies the IPv6 address bound to the load balancer. Multiple IPv6 addresses can be used for query in the format of ipv6_vip_address=xxx&ipv6_vip_address=xxx. |
ipv6_vip_virsubnet_id |
No |
Array of strings |
Specifies the ID of the IPv6 subnet where the load balancer resides. Multiple IDs can be used for query in the format of ipv6_vip_virsubnet_id=xxx&ipv6_vip_virsubnet_id=xxx. |
eips |
No |
Array of strings |
Specifies the IPv4 EIP bound to the load balancer. The following is an example: "eips": [ { "eip_id": "e9b72a9d-4275-455e-a724-853504e4d9c6", "eip_address": "88.88.14.122", "ip_version": 4 } ] Multiple EIPs can be used for query.
Note that this parameter has the same meaning as publicips. |
publicips |
No |
Array of strings |
Specifies the EIP bound to the load balancer. The following is an example: "publicips=": [ { "public_id": "e9b72a9d-4275-455e-a724-853504e4d9c6", "public_address": "88.88.14.122", "ip_version": 4 } ] If you want to query the load balancers that have the above EIP bound, you can use the following format: publicips=ip_version%3D4&publicips=public_address%3D88.88.14.122&publicips=public_id%3De9b72a9d-4275-455e-a724-853504e4d9c6 Multiple values can be used for query in the format of:
Note: This parameter has the same meaning as eips. |
availability_zone_list |
No |
Array of strings |
Specifies the list of AZs where the load balancer is created. Multiple AZs can be used for query in the format of availability_zone_list=xxx&availability_zone_list=xxx. |
l4_flavor_id |
No |
Array of strings |
Specifies the ID of a flavor at Layer 4. Multiple IDs can be used for query in the format of l4_flavor_id=xxx&l4_flavor_id=xxx. |
l7_flavor_id |
No |
Array of strings |
Specifies the ID of a flavor at Layer 7. Multiple flavors can be used for query in the format of l7_flavor_id=xxx&l7_flavor_id=xxx. |
billing_info |
No |
Array of strings |
Provides resource billing information. Multiple values can be used for query in the format of billing_info=xxx&billing_info=xxx. This parameter is unsupported. Please do not use it. |
member_device_id |
No |
Array of strings |
Specifies the ID of the ECS that is associated with the load balancer as a backend server. This is a query parameter and will not be included in the response. Multiple IDs can be used for query in the format of member_device_id=xxx&member_device_id=xxx. |
member_address |
No |
Array of strings |
Specifies the private IP address of the ECS that is associated with the load balancer as a backend server. This is a query parameter and will not be included in the response. Multiple private IP addresses can be used for query in the format of member_address=xxx&member_address=xxx. |
enterprise_project_id |
No |
Array of strings |
Definition: Specifies the ID of the enterprise project where the load balancer is used. Multiple values can be used for query in the format of: enterprise_project_id=xxx&enterprise_project_id=xxx. Constraints:
Range: N/A Default value: N/A |
ip_version |
No |
Array of integers |
Specifies the IP version. The value can be 4 (IPv4) or 6 (IPv6). Multiple versions can be used for query in the format of ip_version=xxx&ip_version=xxx. |
deletion_protection_enable |
No |
Boolean |
Definition: Specifies whether to enable deletion protection. Constraints: N/A Range: false (disable this option) or true (enable this option). Default value: N/A |
elb_virsubnet_type |
No |
Array of strings |
Specifies the type of the subnet on the downstream plane.
Multiple values can be used for query in the format of elb_virsubnet_type=ipv4&elb_virsubnet_type=dualstack. |
autoscaling |
No |
Array of strings |
Specifies whether to enable elastic scaling. Example: "autoscaling": { "enable": "true" } Multiple values can be used for query in the format of autoscaling=enable=true&autoscaling=enable=false. |
protection_status |
No |
Array of strings |
Specifies the protection status. Value options:
|
global_eips |
No |
Array of strings |
Specifies the EIP bound to the load balancer. The following shows an example: { "global_eips": [ { "global_eip_id": "24000000-0000-0000-0000-100000000001", "global_eip_address": "10.10.10.10", "ip_version": 4 } ] } Multiple values can be used for query in the format of:
|
log_topic_id |
No |
String |
Specifies the ID of the log topic that is associated with the load balancer. Multiple IDs can be used for query in the format of log_topic_id=xxx&log_topic_id=xxx. |
log_group_id |
No |
String |
Specifies the ID of the log group that is associated with the load balancer. Multiple IDs can be used for query in the format of log_group_id=xxx&log_group_id=xxx. |
Request Parameters
Parameter |
Mandatory |
Type |
Description |
---|---|---|---|
X-Auth-Token |
No |
String |
Specifies the token used for IAM authentication. |
Response Parameters
Status code: 200
Parameter |
Type |
Description |
---|---|---|
loadbalancers |
Array of RecycleLoadBalancer objects |
Lists the load balancers in the recycle bin. Range: N/A |
page_info |
PageInfo object |
Definition: Specifies the pagination information. |
request_id |
String |
Definition: Specifies the request ID. Range: The value is automatically generated, and can contain characters including digits, lowercase letters, and hyphens (-). |
Parameter |
Type |
Description |
---|---|---|
id |
String |
Definition: Specifies the load balancer ID. Range: N/A |
auto_terminate_time |
String |
Specifies the time when the load balancers in the recycle bin will be permanently deleted, in the format of yyyy-MM-dd'T'HH:mm:ss'Z'. Range: N/A |
description |
String |
Definition: Provides supplementary information about the load balancer. Range: N/A |
provisioning_status |
String |
Definition: Specifies the provisioning status of the load balancer. Range:
|
admin_state_up |
Boolean |
Definition: Specifies whether the load balancer is enabled. Range:
|
provider |
String |
Definition: Specifies the provider of the load balancer. The value is fixed to vlb. Range: N/A |
pools |
Array of PoolRef objects |
Definition: Lists the IDs of backend server groups associated with the load balancer. |
listeners |
Array of ListenerRef objects |
Definition: Lists the IDs of listeners associated with the load balancer. |
operating_status |
String |
Definition: Specifies the operating status of the load balancer. Range:
|
name |
String |
Definition: Specifies the load balancer name. Range: N/A |
project_id |
String |
Definition: Specifies the ID of the project where the load balancer is used. Range: N/A |
vip_subnet_cidr_id |
String |
Definition: Specifies the ID of the IPv4 subnet where the load balancer is located. This subnet is also called the frontend subnet. Range: N/A |
vip_address |
String |
Definition: Specifies the private IPv4 address of the load balancer. Range: N/A |
vip_port_id |
String |
Definition: Specifies the ID of the port bound to the private IPv4 address of the load balancer. Range: N/A |
tags |
Array of Tag objects |
Definition: Specifies the tags added to the load balancer. |
created_at |
String |
Definition: Specifies the time when the load balancer was created. Range: The value must be in the format of yyyy-MM-dd'T'HH:mm:ss'Z'. |
updated_at |
String |
Definition: Specifies the time when the load balancer was updated. Range: The value must be in the format of yyyy-MM-dd'T'HH:mm:ss'Z'. |
guaranteed |
Boolean |
Definition: Specifies whether the load balancer is a dedicated load balancer. Range:
|
vpc_id |
String |
Definition: Specifies the ID of the VPC where the load balancer is located. Range: N/A |
eips |
Array of EipInfo objects |
Definition: Specifies the EIP bound to the load balancer.
NOTE:
This parameter has the same meaning as publicips.
|
ipv6_vip_address |
String |
Definition: Specifies the IPv6 address of the load balancer. Range: N/A |
ipv6_vip_virsubnet_id |
String |
Definition: Specifies the ID of the IPv6 subnet where the load balancer is located. This subnet is also called the frontend subnet. Range: N/A |
ipv6_vip_port_id |
String |
Definition: Specifies the ID of the port bound to the IPv6 address of the load balancer. Range: N/A |
availability_zone_list |
Array of strings |
Definition: Specifies the list of AZs where the load balancers are created. Range: N/A |
enterprise_project_id |
String |
Definition: Specifies the ID of the enterprise project. Range:
|
billing_info |
String |
Definition: Provides resource billing information. Range:
|
l4_flavor_id |
String |
Definition: Specifies the ID of a flavor at Layer 4. For an instance with elastic flavor, this parameter defines the maximum elastic flavor at Layer 4. Range: N/A |
l4_scale_flavor_id |
String |
Definition: Specifies the ID of the elastic flavor at Layer 4. Range: N/A This parameter is unsupported. Please do not use it. |
l7_flavor_id |
String |
Definition: Specifies the ID of a flavor at Layer 7. For an instance with elastic flavor, this parameter defines the ID of the maximum elastic flavor at Layer 7. Range: N/A |
l7_scale_flavor_id |
String |
Definition: Specifies the ID of an elastic flavor at Layer 7. Range: N/A This parameter is unsupported. Please do not use it. |
publicips |
Array of PublicIpInfo objects |
Definition: Specifies the EIP bound to the load balancer. Only one EIP can be bound to a load balancer.
NOTE:
This parameter has the same meaning as eips.
|
global_eips |
Array of GlobalEipInfo objects |
Definition: Specifies the global EIP bound to the load balancer. |
elb_virsubnet_ids |
Array of strings |
Definition: Specifies the network IDs of subnets on the downstream plane. Range: N/A |
elb_virsubnet_type |
String |
Definition: Specifies the type of the subnet on the downstream plane. Range:
|
ip_target_enable |
Boolean |
Definition: Specifies whether to add backend servers that are not in the load balancer's VPC. If you set it to true, you can associate servers in a VPC connected through a VPC peering connection, in a VPC connected through a cloud connection, or in an on-premises data center at the other end of a Direct Connect or VPN connection, by using server IP addresses. Range:
|
frozen_scene |
String |
Definition: Specifies the scenario where the load balancer is frozen. If there are multiple scenarios, separate them with commas (,). Range:
|
ipv6_bandwidth |
BandwidthRef object |
Definition: Specifies the ID of the bandwidth. |
deletion_protection_enable |
Boolean |
Definition: Specifies whether to enable deletion protection. Range:
|
autoscaling |
AutoscalingRef object |
Definition: Specifies information about elastic scaling. If elastic scaling is enabled, the load balancer flavors can be automatically adjusted based on incoming traffic.
NOTE:
This parameter has been deprecated, but is retained for compatibility purposes. Using this parameter is not recommended. If this parameter is specified, the load balancer with minimum flavors will be created and you will be billed for the minimum flavors.
|
public_border_group |
String |
Definition: Specifies the AZ group to which the load balancer belongs. Range: N/A |
charge_mode |
String |
Definition: Specifies the charge mode of the load balancer. Range:
|
waf_failure_action |
String |
Definition: Specifies traffic distributing policies when the WAF is faulty. Range: discard indicates traffic will not be distributed. forward indicates traffic will be distributed to the default backend servers. |
protection_status |
String |
Definition: Specifies the protection status. Constraints: N/A Range:
Default value: N/A |
protection_reason |
String |
Definition: Specifies why modification protection is enabled. Range: The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>). |
log_group_id |
String |
Definition: Specifies the ID of the log group that is associated with the load balancer. Range: N/A |
log_topic_id |
String |
Definition: Specifies the ID of the log topic that is associated with the load balancer. Range: N/A |
Parameter |
Type |
Description |
---|---|---|
id |
String |
Definition: Specifies the backend server group ID. Range: N/A |
Parameter |
Type |
Description |
---|---|---|
id |
String |
Definition: Specifies the listener ID. Range: N/A |
Parameter |
Type |
Description |
---|---|---|
key |
String |
Definition: Specifies the tag key. Range: N/A |
value |
String |
Definition: Specifies the tag value. Range: N/A |
Parameter |
Type |
Description |
---|---|---|
eip_id |
String |
Definition: Specifies the EIP ID. Range: N/A |
eip_address |
String |
Definition: Specifies the EIP. Range: N/A |
ip_version |
Integer |
Definition: Specifies the IP address version. Range:
|
Parameter |
Type |
Description |
---|---|---|
publicip_id |
String |
Definition: Specifies the EIP ID. Range: N/A |
publicip_address |
String |
Definition: Specifies the EIP. Range: N/A |
ip_version |
Integer |
Definition: Specifies the IP address version. Range:
|
Parameter |
Type |
Description |
---|---|---|
global_eip_id |
String |
Definition: Specifies the ID of the global EIP. Range: N/A |
global_eip_address |
String |
Definition: Specifies the global EIP. Range: N/A |
ip_version |
Integer |
Definition: Specifies the IP address version. Range:
|
Parameter |
Type |
Description |
---|---|---|
id |
String |
Definition: Specifies the ID of the shared bandwidth. Constraints: N/A Range: N/A Default value: N/A |
Parameter |
Type |
Description |
---|---|---|
enable |
Boolean |
Definition: Specifies whether to enable elastic scaling for the load balancer. Range:
|
min_l7_flavor_id |
String |
Definition: Specifies the ID of the minimum elastic flavor at Layer 7. Range: N/A |
Parameter |
Type |
Description |
---|---|---|
previous_marker |
String |
Definition: Specifies the ID of the first record in the pagination query result. If page_reverse is set to true, this parameter is used together to query resources on the previous page. Range: N/A |
next_marker |
String |
Definition: Specifies the ID of the last record in the pagination query result. It is usually used to query resources on the next page. Range: N/A |
current_count |
Integer |
Definition: Specifies the number of records returned on the current page. Range: N/A |
Example Requests
Querying load balancers on each page
GET https://{ELB_Endpoint}/v3/b2782e6708b8475c993e6064bc456bf8/elb/recycle-bin/loadbalancers?limit=2&marker=87627cb6-9ff1-4580-984f-cc564fa9fc34
Example Responses
Status code: 200
Successful request.
{ "request_id" : "46b7d911-cece-408c-a2cc-55c78ab025d8", "loadbalancers" : [ { "id" : "65672f7e-2024-4c39-9198-98249da479c5", "project_id" : "057ef081eb00d2732fd1c01a9be75e6f", "name" : "dxq_2021_07_26_11_12_37", "description" : "", "vip_port_id" : "b289f890-a6fa-4405-a9cc-fe62b8a3bed0", "vip_address" : "172.16.0.152", "admin_state_up" : true, "provisioning_status" : "RECYCLING", "operating_status" : "ONLINE", "listeners" : [ { "id" : "dc9572eb-a5b2-47b3-a982-44892d833892" } ], "pools" : [ { "id" : "dc6b01c4-f704-4427-a4c2-21cd5f58d177" } ], "tags" : [ ], "provider" : "vlb", "created_at" : "2021-07-26T03:12:37Z", "updated_at" : "2021-07-26T03:12:37Z", "vpc_id" : "6e0ee31f-7a46-4530-b32f-ce41f30959d4", "enterprise_project_id" : "0", "availability_zone_list" : [ "az1" ], "ipv6_vip_address" : "2001:db8:a583:4cb:d6b8:f8b4:4211:fe72", "ipv6_vip_virsubnet_id" : "0b9e3c5e-3ec8-46b3-bab9-80b1450e59ee", "ipv6_vip_port_id" : "5186bb47-24e5-4171-b795-62d22846db9b", "publicips" : [ ], "elb_virsubnet_ids" : [ "0b9e3c5e-3ec8-46b3-bab9-80b1450e59ee" ], "elb_virsubnet_type" : "dualstack", "ip_target_enable" : false, "autoscaling" : { "enable" : false, "min_l7_flavor_id" : "" }, "frozen_scene" : null, "eips" : [ ], "guaranteed" : true, "billing_info" : null, "l4_flavor_id" : "aa06b26b-9ff9-43c6-92b9-41e0f746bca6", "l4_scale_flavor_id" : null, "l7_flavor_id" : "e2a5675c-a181-444e-b9a5-17b052dc7fb9", "l7_scale_flavor_id" : null, "vip_subnet_cidr_id" : "96e52038-7983-462f-8a96-415d8a280b13", "public_border_group" : "center", "log_topic_id" : null, "log_group_id" : null, "auto_terminate_time" : "2021-07-26T03:18:37Z" }, { "id" : "cce5318e-c79a-4f68-94a2-9fb285c6efbe", "project_id" : "057ef081eb00d2732fd1c01a9be75e6f", "name" : "elb-reset", "description" : "", "vip_port_id" : null, "vip_address" : null, "admin_state_up" : true, "provisioning_status" : "RECYCLING", "operating_status" : "ONLINE", "listeners" : [ { "id" : "0ae21c37-8b90-4e73-8a35-eedde6d2538c" } ], "pools" : [ { "id" : "904ecca6-8ebb-4974-9c5c-61d1d66fba17" } ], "tags" : [ ], "provider" : "vlb", "created_at" : "2021-07-26T02:46:31Z", "updated_at" : "2021-07-26T02:46:59Z", "vpc_id" : "59cb11ef-f185-49ba-92af-0539e8ff9734", "enterprise_project_id" : "0", "availability_zone_list" : [ "az1" ], "ipv6_vip_address" : null, "ipv6_vip_virsubnet_id" : null, "ipv6_vip_port_id" : null, "publicips" : [ { "publicip_id" : "0c07e04d-e2f9-41ad-b934-f58a65b6734d", "publicip_address" : "97.97.2.171", "ip_version" : 4 } ], "elb_virsubnet_ids" : [ "7f817f9c-8731-4002-9e47-18cb8d431787" ], "elb_virsubnet_type" : "dualstack", "ip_target_enable" : false, "autoscaling" : { "enable" : false, "min_l7_flavor_id" : "" }, "frozen_scene" : null, "eips" : [ { "eip_id" : "0c07e04d-e2f9-41ad-b934-f58a65b6734d", "eip_address" : "97.97.2.171", "ip_version" : 4 } ], "guaranteed" : true, "billing_info" : null, "l4_flavor_id" : "636ba721-935a-4ca5-a685-8076ce0e4148", "l4_scale_flavor_id" : null, "l7_flavor_id" : null, "l7_scale_flavor_id" : null, "vip_subnet_cidr_id" : null, "public_border_group" : "center", "log_topic_id" : null, "log_group_id" : null, "auto_terminate_time" : "2021-07-26T03:18:37Z" } ], "page_info" : { "next_marker" : "cce5318e-c79a-4f68-94a2-9fb285c6efbe", "previous_marker" : "65672f7e-2024-4c39-9198-98249da479c5", "current_count" : 2 } }
SDK Sample Code
The SDK sample code is as follows.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 |
package com.huaweicloud.sdk.test; import com.huaweicloud.sdk.core.auth.ICredential; import com.huaweicloud.sdk.core.auth.BasicCredentials; import com.huaweicloud.sdk.core.exception.ConnectionException; import com.huaweicloud.sdk.core.exception.RequestTimeoutException; import com.huaweicloud.sdk.core.exception.ServiceResponseException; import com.huaweicloud.sdk.elb.v3.region.ElbRegion; import com.huaweicloud.sdk.elb.v3.*; import com.huaweicloud.sdk.elb.v3.model.*; public class ListRecycleBinLoadBalancersSolution { public static void main(String[] args) { // The AK and SK used for authentication are hard-coded or stored in plaintext, which has great security risks. It is recommended that the AK and SK be stored in ciphertext in configuration files or environment variables and decrypted during use to ensure security. // In this example, AK and SK are stored in environment variables for authentication. Before running this example, set environment variables CLOUD_SDK_AK and CLOUD_SDK_SK in the local environment String ak = System.getenv("CLOUD_SDK_AK"); String sk = System.getenv("CLOUD_SDK_SK"); String projectId = "{project_id}"; ICredential auth = new BasicCredentials() .withProjectId(projectId) .withAk(ak) .withSk(sk); ElbClient client = ElbClient.newBuilder() .withCredential(auth) .withRegion(ElbRegion.valueOf("<YOUR REGION>")) .build(); ListRecycleBinLoadBalancersRequest request = new ListRecycleBinLoadBalancersRequest(); try { ListRecycleBinLoadBalancersResponse response = client.listRecycleBinLoadBalancers(request); System.out.println(response.toString()); } catch (ConnectionException e) { e.printStackTrace(); } catch (RequestTimeoutException e) { e.printStackTrace(); } catch (ServiceResponseException e) { e.printStackTrace(); System.out.println(e.getHttpStatusCode()); System.out.println(e.getRequestId()); System.out.println(e.getErrorCode()); System.out.println(e.getErrorMsg()); } } } |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 |
# coding: utf-8 import os from huaweicloudsdkcore.auth.credentials import BasicCredentials from huaweicloudsdkelb.v3.region.elb_region import ElbRegion from huaweicloudsdkcore.exceptions import exceptions from huaweicloudsdkelb.v3 import * if __name__ == "__main__": # The AK and SK used for authentication are hard-coded or stored in plaintext, which has great security risks. It is recommended that the AK and SK be stored in ciphertext in configuration files or environment variables and decrypted during use to ensure security. # In this example, AK and SK are stored in environment variables for authentication. Before running this example, set environment variables CLOUD_SDK_AK and CLOUD_SDK_SK in the local environment ak = os.environ["CLOUD_SDK_AK"] sk = os.environ["CLOUD_SDK_SK"] projectId = "{project_id}" credentials = BasicCredentials(ak, sk, projectId) client = ElbClient.new_builder() \ .with_credentials(credentials) \ .with_region(ElbRegion.value_of("<YOUR REGION>")) \ .build() try: request = ListRecycleBinLoadBalancersRequest() response = client.list_recycle_bin_load_balancers(request) print(response) except exceptions.ClientRequestException as e: print(e.status_code) print(e.request_id) print(e.error_code) print(e.error_msg) |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 |
package main import ( "fmt" "github.com/huaweicloud/huaweicloud-sdk-go-v3/core/auth/basic" elb "github.com/huaweicloud/huaweicloud-sdk-go-v3/services/elb/v3" "github.com/huaweicloud/huaweicloud-sdk-go-v3/services/elb/v3/model" region "github.com/huaweicloud/huaweicloud-sdk-go-v3/services/elb/v3/region" ) func main() { // The AK and SK used for authentication are hard-coded or stored in plaintext, which has great security risks. It is recommended that the AK and SK be stored in ciphertext in configuration files or environment variables and decrypted during use to ensure security. // In this example, AK and SK are stored in environment variables for authentication. Before running this example, set environment variables CLOUD_SDK_AK and CLOUD_SDK_SK in the local environment ak := os.Getenv("CLOUD_SDK_AK") sk := os.Getenv("CLOUD_SDK_SK") projectId := "{project_id}" auth := basic.NewCredentialsBuilder(). WithAk(ak). WithSk(sk). WithProjectId(projectId). Build() client := elb.NewElbClient( elb.ElbClientBuilder(). WithRegion(region.ValueOf("<YOUR REGION>")). WithCredential(auth). Build()) request := &model.ListRecycleBinLoadBalancersRequest{} response, err := client.ListRecycleBinLoadBalancers(request) if err == nil { fmt.Printf("%+v\n", response) } else { fmt.Println(err) } } |
For SDK sample code of more programming languages, see the Sample Code tab in API Explorer. SDK sample code can be automatically generated.
Status Codes
Status Code |
Description |
---|---|
200 |
Successful request. |
Error Codes
See Error Codes.
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot