Creating a Virtual Gateway

Scenario

You can create a virtual gateway and associate it with the VPC that you need to access.

Procedure

1. Go to the Virtual Gateways page.
2. In the upper left corner of the page, click and select a region and project.
3. In the upper right corner, click Create Virtual Gateway.
4. Configure the parameters based on Table 1.
   Figure 1 Creating a virtual gateway
   

   Table 1 Parameters required for creating a virtual gateway

   Parameter	Example Value	Description
   Name	vgw-123	Specifies the virtual gateway name. The name can contain 1 to 64 characters.
   Enterprise Project	default	Specifies the enterprise project by which virtual gateways are centrally managed. Select an existing enterprise project.
   VPC	VPC-001	Specifies the VPC to be associated with the virtual gateway.
   Local Subnet	192.168.0.0/16	Specifies the CIDR blocks of the subnets in the VPC to be accessed using Direct Connect. You can add one or more CIDR blocks. If there are multiple CIDR blocks, separate every entry with a comma (,).
   BGP ASN	64512	Specifies the BGP ASN of the virtual gateway. NOTE: Generally, Huawei Cloud's BGP ASN is 64512. There are two special cases: In the CN North-Beijing1 region, the default BGP ASN of Huawei Cloud is 65533. In the AP-Bangkok region, the BGP ASN of some Direct Connect locations is 65535 by default. For details, contact the Direct Connect manager.
   Tag	example_key1 example_value1	Adds tags to help you identify your virtual gateway. You can change them after the virtual gateway is created.
   Description	-	Provides supplementary information about the virtual gateway.

5. Click OK.

   When the status changes to Normal, the virtual gateway has been created.