Transmitting and Storing a File in Encryption Mode

CodeArts Repo uses git-crypt for encrypted storage and transmission of confidential and sensitive files.

About git-crypt

git-crypt is a third-party open-source software that can transparently encrypt and decrypt files in the Git repository. It can encrypt and store specified files and file types. Developers can store encrypted files (such as confidential information or sensitive data) and shared code in the same repository and pull and push them like in a common repository. Only the person who has the corresponding file key can view the content of the encrypted files, but others are not restricted to read and write unencrypted files.

git-crypt allows you to encrypt only specific files without locking the entire repository, facilitating team cooperation and ensuring information security.

Using Key Pairs for Encryption and Decryption on Windows

Install and initialize Git.
Download the latest Windows-based git-crypt and save the downloaded .exe file to the cmd folder in the Git installation directory. The following figure uses the default Git Bash installation path of Windows Server 2012 R2 Standard (64-bit) as an example.

Put the .exe file in the folder. You do not need to run it.
Generate a key pair.
1. Open Git Bash and go to the local repository, as shown in 1 in the following figure.
2. Run the following command to generate a key pair, as shown in 2 in the following figure.
```
git-crypt init
```
3. Export the key file. In this example, the key file is exported to the C:\test directory and named KeyFile. Run the following command, as shown in 3 in the following figure.
```
git-crypt export-key /c/test/keyfile
```
4. Check whether the key is generated in the file path where the key is exported. In this example, check whether the KeyFile file exists in the C:\test directory, as shown in the following figure.
  
  The computer containing the key file can decrypt the corresponding encrypted file.
Configure the encryption scope for the repository.
1. Create a file named .gitattributes in the root directory of the repository.
2. Open the .gitattributes file and run the following command to set the encryption range.
```
<file_name_or_file_range>: filter=git-crypt diff=git-crypt
```
  Four examples are as follows:
```
FT/file01.txt filter=git-crypt diff=git-crypt  # Encrypt a specified file. In this example, the file01.txt file in the FT folder is encrypted.
*.java filter=git-crypt diff=git-crypt  # The .java file is encrypted.
G* filter=git-crypt diff=git-crypt   # Files which names start with G are encrypted.
ForTest/** filter=git-crypt diff=git-crypt   # Files in the ForTest folder are encrypted.
```
- If the system prompts you to enter the file name when you create the .gitattributes file, you can enter .gitattributes. to create the file. If you run the Linux command to create the file, this problem does not occur.
- Do not save the .gitattributes file as a .txt file. Otherwise, the configuration does not take effect.
Encrypt the file.

Open Git Bash in the root directory of the repository and run the following command to encrypt the file. The encryption status of the file is displayed.
```
git-crypt status
```
After the encryption, you can still open and edit the encrypted files in plaintext in your local repository because your local repository has a key.

You can run the add, commit, and push commands to push the repository to CodeArts Repo. In this case, the encrypted files are pushed together.

Encrypted files are stored in CodeArts Repo as encrypted binary files and cannot be viewed directly. If you do not have a key, you cannot decrypt it even if you download it to the local computer.

git-crypt status encrypts only the files to be committed this time. It does not encrypt the historical files that are not modified this time. Git displays a message for the unencrypted files involved in this setting (see Warning in the preceding figure). If you want to encrypt all files of a specified type in the repository, run the git-crypt status -f command.

In team cooperation, -f (forcible execution) has certain risks and may cause the members' work output to remain unchanged. Exercise caution when using -f.
Decrypt the file.
1. Ensure that the git-crypt file exists in the Git installation path on the local computer.
2. Clone the repository from CodeArts Repo to the local host.
3. Obtain the key file for encrypting the repository and store it on the local computer.
4. Go to the repository directory and right-click Git Bash.
5. Run the decryption command. If no command output is displayed, the command is successfully executed.
```
git-crypt unlock /C/test/KeyFile # Replace /C/test/KeyFile with the actual key storage path.
```

Encrypting and Decrypting a File in GPG Mode on Windows

Install and initialize Git.
Download the latest Windows-based git-crypt and save the downloaded .exe file to the cmd folder in the Git installation directory. The following figure uses the default Git Bash installation path of Windows Server 2012 R2 Standard (64-bit) as an example.

Put the .exe file in the folder. You do not need to run it.
Download the GPG of the latest version. When you are prompted to donate the open-source software, select 0 to skip the donation process.

Double-click to start the installation. Click Next to complete the installation.
Generate a key pair in GPG mode.
1. Open Git Bash and run the following command:
```
gpg --gen-key
```
2. Enter the name and email address as prompted.
3. Enter o as prompted and press Enter. The dialog boxes for entering and confirming the password are displayed.
  
  The password can be empty. To ensure information security, you are advised to enter a password that complies with the standard (this password is required for decryption).
4. If the following information is displayed, the GPG key pair is generated successfully.
Initialize the repository encryption.
1. Open Git bash in the root directory of the repository and run the following command to initialize the repository:
```
git-crypt init
```
2. Run the following command to add a copy of the key to your repository. The copy has been encrypted using your public GPG key.
```
git-crypt add-gpg-user USER_ID
```
  USER_ID can be the name, email address, or fingerprint that uniquely identifies the key, as shown in 1, 2, and 3 in the following figure in sequence.
  
  After the command is executed, a message is displayed, indicating that the .git-crypt folder and two files in it are created.

Configure the encryption scope for the repository.

Go to the .git-crypt folder in the repository.

Open the .gitattributes file and run the following command to set the encryption range.

<file_name_or_file_range>: filter=git-crypt diff=git-crypt

Four examples are as follows:

FT/file01.txt filter=git-crypt diff=git-crypt  # Encrypt a specified file. In this example, the file01.txt file in the FT folder is encrypted.
*.java filter=git-crypt diff=git-crypt  # The .java file is encrypted.
G* filter=git-crypt diff=git-crypt   # Files which names start with G are encrypted.
ForTest/** filter=git-crypt diff=git-crypt   # Files in the ForTest folder are encrypted.

Copy the .gitattributes file to the root directory of the repository.

Encrypt the file.

Open Git Bash in the root directory of the repository and run the following command to encrypt the file. The encryption status of the file is displayed.
```
git-crypt status
```
After the encryption, you can still open and edit the encrypted files in plaintext in your local repository because your local repository has a key.

You can run the add, commit, and push commands to push the repository to CodeArts Repo. In this case, the encrypted files are pushed together.

Encrypted files are stored in CodeArts Repo as encrypted binary files and cannot be viewed directly. If you do not have a key, you cannot decrypt it even if you download it to the local computer.

git-crypt status encrypts only the files to be committed this time. It does not encrypt the historical files that are not modified this time. Git displays a message for the unencrypted files involved in this setting (see Warning in the preceding figure). If you want to encrypt all files of a specified type in the repository, run the git-crypt status -f command.

In team cooperation, -f (forcible execution) has certain risks and may cause the members' work output to remain unchanged. Exercise caution when using -f.
Export the key.
1. Lists the currently visible keys. You can view the name, email address, and fingerprint of each key.
```
gpg --list-keys
```
2. Run the gpg --export-secret-key command to export the keys. In this example, the gpgTest key is exported to drive C and named Key.
```
gpg --export-secret-key -a gpgTest > /c/key   # -a indicates that the key is displayed in text format.
```
  During the execution, the system prompts you to enter the key password. Enter the correct password.
  
  No command output is displayed. You can view the key file in the corresponding directory (drive C in this example).
3. Send the generated key to the team members to share the encrypted file.
Import the key and decrypt the file.
1. To decrypt files on another computer, you need to download and install git-crypt and GPG based on Git. For details, see the previous steps in this section.
2. Clone the corresponding repository to the local host.
3. Obtain the key of the corresponding encrypted file. For details about how to export the key, see the previous step. In this example, the obtained key is stored in drive C.
4. Go to the repository, open Git Bash, and run the import command to import the key.
```
gpg --import  /c/key
# /c/Key is the key path and user-defined key name in this example. Replace them with the actual ones.
```
  During the import, the system prompts you to enter the password of the key. If the import is successful, the following figure is displayed.
5. Run the unlock command to decrypt the file.
```
git-crypt unlock
```
  During the decryption, a dialog box is displayed, prompting you to enter the password of the key. If no command output is displayed after you enter the correct password, the decryption is successful.
View the file before and after decryption.

Application of git-crypt Encryption in Teamwork

In most cases, a team needs to store files that have restricted disclosure in the code repository. It can use CodeArts Repo, Git, and git-crypt to encrypt some files in the distributed open-source repository.

Generally, Key pair encryption can meet the requirements of restricting the access to some files.

When a team needs to set different confidential levels for encrypted files, the GPG encryption can be used. This encryption mode allows you to use different keys to encrypt different files in the same repository and share the keys of different confidential levels with team members, restricting file access by level.

Installing git-crypt and gpg on Linux and macOS

Installing git-crypt and gpg on Linux

Linux installation environment

Software	Debian/Ubuntu Package	RHEL/CentOS Package
Make	make	make
A C++11 compiler (e.g. gcc 4.9+)	g++	gcc-c++
OpenSSL development files	libssl-dev	openssl-devel

In Linux, install git-crypt by compiling the source code.
Download the source code.
```
make
make install
```
Install git-crypt to a specified directory
```
make install PREFIX=/usr/local
```
In Linux, install GPG by compiling the source code.
Download the source code.
```
./configure
make
make install
```
Install git-crypt using the Debian package.
You can download the source code.

The Debian package can be found in the debian branch of the project Git repository.

The software package is built using git-buildpackage, as shown in the following figure.
```
git checkout debian
git-buildpackage -uc -us
```
Install GPG using the build package in Debian.
```
sudo apt-get install gnupg
```

Install git-crypt and GPG on macOS.

Install git-crypt on macOS.
Run the following command to install git-crypt using the brew package manager.
```
brew install git-crypt
```
Install GPG on macOS.
Run the following command to install git-crypt using the brew package manager.
```
brew install gpg
```

Parent topic: Submitting Code to the CodeArts Repo

Previous topic: Creating a Commit

Next topic: Viewing Commit History