From OBS

Basic parameters

Bucket Name

Name of the bucket from which data will be migrated

BUCKET_2

Source Directory/File

This parameter is available only when Pull List File is set to No.

Directory or file path from which data will be extracted. You can enter a maximum of 50 file paths. By default, the file paths are separated by vertical bars (|). You can also customize a file separator.

This parameter can be configured as a macro variable of date and time and a path name can contain multiple macro variables. When the macro variable of date and time works with a scheduled job, the incremental data can be synchronized periodically.

FROM/example.csv

File Format

CSV

Pull List File

This parameter is displayed only when File Format is set to Binary.

If the pull list file function is enabled, the content of a file (such as a .txt file) in an OBS bucket can be read as the list of files to be migrated. The content in the file must be the absolute path of the file to be migrated (rather than a directory). For example, the content is as follows:

/052101/DAY20211110.data

/052101/DAY20211111.data

Yes

OBS Link of List File

This parameter is available only when Pull List File is set to Yes. You can select the OBS link where the list file is located.

OBS_test_link

OBS Bucket of entries files

This parameter is available only when Pull List File is set to Yes. It indicates the name of the OBS bucket where the list file is located.

01

Path/Directory of entries files

This parameter is available only when Pull List File is set to Yes. It indicates the absolute path or directory of the list file in the OBS bucket.

You are advised to select the absolute path of the file. If you select a directory, files in subdirectories can also be migrated. However, if the number of files in the directory is too large, the cluster memory may become insufficient.

/0521/Lists.txt

JSON Type

This parameter is displayed only when File Format is set to JSON. Type of a JSON object stored in a JSON file. The options are JSON object and JSON array.

JSON object

JSON Reference Node

This parameter is used only when File Format is set to JSON and JSON Type is set to JSON Object. CDM parses the data under the JSON node. If the node's corresponding data is a JSON array, the system will extract data from the array in the same pattern. Use periods (.) to separate multi-layer nested JSON nodes.

data.list

Advanced attributes

Line Separator

Lind feed character in a file. By default, the system automatically identifies \n, \r, and \r\n. This parameter is displayed only when File Format is set to CSV.

\n

Field Delimiter

Character used to separate fields in the file. To set the Tab key as the delimiter, set this parameter to \t. This parameter is displayed only when File Format is set to CSV.

,

Use Quote Character

If you set this parameter to Yes, the field delimiters in the encircling symbol are regarded as a part of the string value. Currently, the default encircling symbol of CDM is ".

No

Use RE to Separate Fields

Whether to use regular expressions to separate fields. If you set this parameter to Yes, Field Delimiter becomes invalid. This parameter is displayed only when File Format is set to CSV.

Yes

Regular Expression

Regular expression used to separate fields.

^(\d.*\d) (\w*) \[(.*)\] ([\w\.]*) (\w.*).*

Use First Row as Header

This parameter is displayed only when File Format is set to CSV. When you migrate a CSV file to a table, CDM writes all data to the table by default. If you set this parameter to Yes, CDM uses the first line of the CSV file as the heading line and does not write the line to the destination table.

No

Encoding Type

Encoding type, for example, UTF-8 or GBK. You can set the encoding type for text files only. This parameter is invalid when File Format is set to Binary.

GBK

Compression Format

NONE

Compressed File Suffix

This parameter is displayed when Compression Format is not NONE.

This parameter specifies the extension of the files to be decompressed. The decompression operation is performed only when the file name extension is used in a batch of files. Otherwise, files are transferred in the original format. If you enter * or leave the parameter blank, all files are decompressed.

*

Source File Processing Method

No action

Start Job by Marker File

Whether to start a job by a marker file. A job is only started if there is a marker file for starting the job in the source path. If there is no marker file, the job will be suspended for a period of time specified by Suspension Period.

No

Marker File

Name of the marker file for starting a job. If you specify a marker file, the migration job is executed only when the marker file exists in the source path. The marker file will not be migrated.

ok.txt

Suspension Period

Waiting period for a marker file. If you set Start Job by Marker File to Yes but there is no marker file in the source path, the job fails when the suspension period times out.

If you set this parameter to 0 and there is no marker file in the source path, the job will fail immediately.

Unit: second

10

File Separator

File separator. If you enter multiple file paths in Source Directory/Files, CDM uses the file separator to identify files. The default value is |.

|

Filter Type

Only paths or files that meet the filtering conditions are transferred. The options are None, Wildcard, and Regex.

Wildcard

Directory Filter

If you set Filter Type to Wildcard, enter a wildcard character to filter paths. The paths that meet the filtering condition are migrated. You can configure multiple paths separated by commas (,).

*input

File Filter

If you set Filter Type to Wildcard, you can enter a wildcard character to search for files in a specified path. The files that meet the search criteria are migrated. You can configure multiple files separated by commas (,).

*.csv,*.txt

Time Filter

If you select Yes, files are transferred based on their modification time.

Yes

Minimum Timestamp

If you set Filter Type to Time Filter, and specify a point in time for this parameter, only the files modified after the specified time are transferred. The time format must be yyyy-MM-dd HH:mm:ss.

This parameter can be set to a macro variable of date and time. For example, ${timestamp(dateformat(yyyy-MM-dd HH:mm:ss,-90,DAY))} indicates that only files generated within the latest 90 days are migrated.

2019-06-01 00:00:00

Maximum Timestamp

If you set Filter Type to Time Filter, and specify a point in time for this parameter, only the files modified before the specified time are transferred. The time format must be yyyy-MM-dd HH:mm:ss.

This parameter can be set to a macro variable of date and time. For example, ${timestamp(dateformat(yyyy-MM-dd HH:mm:ss))} indicates that only the files whose modification time is earlier than the current time are migrated.

2019-07-01 00:00:00

Encryption

AES-256-GCM

Disregard Non-existent Path or File

If this is set to Yes, the job can be successfully executed even if the source path does not exist.

No

DEK

This parameter is displayed only when Encryption is set to AES-256-GCM. The key consists of 64 hexadecimal numbers and must be the same as the DEK configured during encryption. If the decryption and encryption keys are inconsistent, the system does not report an exception, but the decrypted data is incorrect.

DD0AE00DFECD78BF051BCFDA25BD4E320DB0A7AC75A1F3FC3D3C56A457DCDC1B

IV

This parameter is displayed only when Encryption is set to AES-256-GCM. The initialization vector consists of 32 hexadecimal numbers and must be the same as the IV configured during encryption. If the initialization vectors are inconsistent, the system does not report an exception, but the decrypted data is incorrect.

5C91687BA886EDCD12ACBC3FF19A3C3F

MD5 File Extension

This parameter is displayed only when File Format is set to Binary.

This parameter is used to check whether the files extracted by CDM are consistent with source files.

.md5