ALM-3276800203 The IoT Card Does Not Match the Configured Type

Description

WLAN/2/IOT_CARD_TYPE_MISMATCH:OID [OID] The IoT card does not match the configured type. (APMAC=[OPAQUE], APName=[STRING], APID=[INTEGER], APIotCardId=[INTEGER], APIotCardType=[STRING])

The IoT card type does not match the configuration.

Attribute

Alarm ID	Alarm Severity	Alarm Type
3276800203	Major	Equipment alarm

Parameters

Name	Meaning
OID	Indicates the ID of a MIB object.
APMAC	Indicates the MAC address of an AP.
APName	Indicates the AP name.
APID	Indicates the AP ID.
APIotCardId	Indicates the ID of an IoT card.
APIotCardType	Indicates the type of an IoT card.

Impact on the System

The AP cannot communicate with the IoT card.

Possible Causes

Cause 1: The configured IoT card type is incorrect.

Cause 2: The type of the inserted IoT card is incorrect.

Procedure

Check whether the IoT card type is correctly configured.
- If so, go to Step 3.
- If not, go to Step 2.
Run the card connect-type { ethernet | serial } command to correctly configure the IoT card type. Check whether the alarm is cleared.
- If so, go to Step 5.
- If not, go to Step 3.
Replace the IoT card with one of the correct type and check whether the alarm is cleared.
- If so, go to Step 5.
- If not, go to Step 4.
Collect alarm and configuration information, and contact technical support personnel.
End.