Help Center/ MapReduce Service/ User Guide/ MRS Cluster O&M/ MRS Cluster Alarm Handling Reference/ ALM-13001 Available ZooKeeper Connections Are Insufficient
Updated on 2024-09-23 GMT+08:00

ALM-13001 Available ZooKeeper Connections Are Insufficient

Description

The system checks ZooKeeper connections every 60 seconds. This alarm is generated when the system detects that the number of used ZooKeeper instance connections exceeds the threshold (80% of the maximum connections).

When the Trigger Count is 1, this alarm is cleared when the number of used ZooKeeper instance connections is smaller than or equal to the threshold. When the Trigger Count is greater than 1, this alarm is cleared when the number of used ZooKeeper instance connections is smaller than or equal to 90% of the threshold.

Attribute

Alarm ID

Alarm Severity

Auto Clear

13001

Major

Yes

Parameters

Name

Meaning

Source

Specifies the cluster for which the alarm is generated.

ServiceName

Specifies the service name for which the alarm is generated.

RoleName

Specifies the role for which the alarm is generated.

HostName

Specifies the host name for which the alarm is generated.

Trigger Condition

Specifies the threshold triggering the alarm. If the current indicator value exceeds this threshold, the alarm is generated.

Impact on the System

Available ZooKeeper connections are insufficient. When the connection usage reaches 100%, the ZooKeeper cannot process external connections. As a result, upstream components (such as Yarn and Flink) cannot run properly.

Possible Causes

The number of connections to the ZooKeeper node exceeds the threshold. Connection leakage occurs on some connection processes, or the maximum number of connections does not comply with the actual scenario.

Procedure

Check connection status.

  1. On the FusionInsight Manager portal, choose O&M > Alarm > Alarms. On the displayed interface, click the drop-down button of Available ZooKeeper Connections Are Insufficient and confirm the node IP address of the host for which the alarm is generated in the Location Information.
  2. Obtain the PID of the ZooKeeper process. Log in to the node involved in this alarm as user root and run the pgrep -f proc_zookeeper command.
  3. Check whether the PID can be correctly obtained.

    • If yes, go to 4.
    • If no, go to 15.

  4. Obtain all the IP addresses connected to the ZooKeeper instance and the number of connections and check 10 IP addresses with top connections. Run the following command based on the obtained PID: lsof -i|grep $pid | awk '{print $9}' | cut -d : -f 2 | cut -d \>-f 2 | awk '{a[$1]++} END {for(i in a){print i,a[i] | "sort -r -g -k 2"}}' | head -10. (The PID obtained in the preceding step is used.)
  5. Check whether node IP addresses and number of connections are successfully obtained.

    • If yes, go to 6.
    • If no, go to 15.

  6. Obtain the ID of the port connected to the process. Run the following command based on the obtained PID and IP address: lsof -i|grep $pid | awk '{print $9}'|cut -d \> -f 2 |grep $IP| cut -d : -f 2. (The PID and IP address obtained in the preceding step are used.)
  7. Check whether the port ID is successfully obtained.

    • If yes, go to 8.
    • If no, go to 15.

  8. Obtain the ID of the connected process. Log in to each IP address and run the following command based on the obtained port ID: lsof -i|grep $port. (The port ID obtained in the preceding step is used.)
  9. Check whether the process ID is successfully obtained.

    • If yes, go to 10.
    • If no, go to 15.

  10. Check whether connection leakage occurs on the process based on the obtained process ID.

    • If yes, go to 11.
    • If no, go to 12.

  11. Close the process where connection leakage occurs and check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 12.

  12. On the FusionInsight Manager portal, choose Cluster > Name of the desired cluster > Services > ZooKeeper > Configurations > All Configurations > quorumpeer > Performance and increase the value of maxCnxns as required.

    Figure 1 maxCnxns

  13. Save the configuration and restart the ZooKeeper service.

    The service will be unavailable during the restart. In addition, upper-layer services that depend on the service are affected.

  14. Check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 15.

Collect fault information.

  1. On the FusionInsight Manager portal, choose O&M > Log > Download.
  2. Select ZooKeeper in the required cluster from the Service:
  3. Click in the upper right corner, and set Start Date and End Date for log collection to 10 minutes ahead of and after the alarm generation time, respectively. Then, click Download.
  4. Contact the O&M personnel and send the collected log information.

Alarm Clearing

After the fault is rectified, the system automatically clears this alarm.

Related Information

None