Configuring the DP300
To activate the DP300, log in to its web interface and set TR069 parameters.
- Log in to the web interface of the hard terminal.
In the address box, enter the terminal IP address, username, and password, and click Log In.
- Choose System Settings > Network > IP and configure the DNS server.
The DNS server is subject to the actual DNS server on your network.
- Choose System Settings > Network > TR069, set TR069 to Enable, enter the ACS username, password, and address, and click Save.
Table 1 Parameters Parameter
Description
ACS user name
Indicates the TR069 account that the system sends by SMS or email after the administrator adds the hard terminal.
ACS password
Indicates the TR069 password sent by the system by SMS or email after the administrator adds the hard terminal.
ACS server IP address
Enter https://device-ap-southeast-1.meeting.huaweicloud.com:8444/tr069/services/acs.
- Choose Maintenance > System Status and check whether the system status is normal. If ACS is connected and the terminal has been registered with the SIP server, the activation is successful.
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot