Buying a Single-Node Instance
This section describes how to buy a single-node instance that is compatible with InfluxDB APIs on the GeminiDB console.
Each tenant can have up to 50 GeminiDB Influx instances by default. To request a higher quota, contact customer service.
Prerequisites
- You have created a Huawei Cloud account.
Procedure
- Log in to the GeminiDB console.
- In the service list, choose Databases > GeminiDB Influx API.
- On the Instances page, click Buy DB Instance.
- On the displayed page, select a billing mode, select instance specifications and click Next.
Figure 1 Billing mode and basic information
Table 1 Billing description Parameter
Description
Billing Mode
Method that the instance is billed in. The value can be Yearly/Monthly or Pay-per-use.
- Yearly/Monthly
- In this mode, specify Required Duration at the bottom of the page. The system bills you based on the service price.
- If you do not need such an instance any longer after it expires, change the billing mode to pay-per-use to optimize costs. For details, see Yearly/Monthly to Pay-per-Use.
NOTE:
Yearly/Monthly instances cannot be deleted directly. If such an instance is no longer required, unsubscribe from it. For details, see How Do I Unsubscribe from Yearly/Monthly Instances?.
- Pay-per-use
- If you select this billing mode, you are billed based on how much time the instance is in use.
- If you expect to use an instance for a long period of time, change its billing mode to yearly/monthly to optimize costs. For details, see Pay-per-Use to Yearly/Monthly.
Table 2 Basic information Parameter
Description
Region
The region where the tenant is located. It can be changed in the upper left corner.
NOTICE:Select the nearest region where you will access the instance from, so latency can be kept to a minimum and response will be faster. Instances deployed in different regions cannot communicate with each other through a private network. After you buy an instance, you cannot change its region.
DB Instance Name
The instance name:
- Can be the same as an existing instance name.
- Contains 4 to 64 characters and must start with a letter. It is case-sensitive and allows only letters, digits, hyphens (-), and underscores (_). If the name contains Chinese characters, the length cannot exceed 64 bytes.
You can change the name of an instance after it is created. For details, see Changing an Instance Name.
Compatible API
InfluxDB
DB Instance Type
Single node
DB Engine Version
1.8
AZ
Availability zone where the instance is created. An AZ is a part of a region with its own independent power supplies and networks. AZs are physically isolated but can communicate with each other over a private network.
A single-node instance can be deployed in one AZ.
Figure 2 Specifications and storage
Table 3 Specifications and storage Parameter
Description
Instance Specifications
The specifications depend on configurations of the DFV shared resource pool and memory. Select specifications based on service requirements.
For details about supported specifications, see Instance Specifications.
Nodes
A single-node instance can have only one node.
Storage Space
The storage is an integer and the minimum storage is 100 GB. You can add a minimum of 1 GB at a time.
Figure 3 Network and database configurations
Table 4 Network configurations Parameter
Description
VPC
The virtual network where the instance is created. A VPC isolates networks for different services. You can select an existing VPC or create one.
For details about how to create a VPC, see "Creating a VPC" in Virtual Private Cloud User Guide.
With VPC sharing, you can also use a VPC and subnet shared by another account.
VPC owners can share the subnets in a VPC with one or multiple accounts through Resource Access Manager (RAM). This allows for more efficient use of network resources and reduces O&M costs.
For more information about VPC subnet sharing, see VPC Sharing in Virtual Private Cloud User Guide.
If there are no VPCs available, the system automatically allocates a VPC to you.
NOTE:- After a GeminiDB Influx instance is created, the VPC where the instance is deployed cannot be changed.
- If you want to connect to a GeminiDB Influx instance from an ECS over a private network, ensure that the instance and the ECS are in the same VPC. If they are not, create a VPC peering connection between them.
Subnet
A subnet where your instance is created. The subnet provides dedicated and isolated networks, improving network security.
NOTE:Creating an IPv4 subnet or selecting an existing one is recommended. IPv6 subnets are not supported.
Security group
A security group controls access between GeminiDB Influx instances and other services. Ensure that the security group you selected allows your client to access the instance.
If no security group is available, the system creates one for you.
Table 5 Database configurations Parameter
Description
Administrator
Username of the administrator account. The default value is rwuser.
Administrator Password
Password of the administrator account. The password:
- Can include 8 to 32 characters.
- Can include uppercase letters, lowercase letters, digits, and any of the following special characters: ~!@#%^*-_=+?
- For security reasons, set a strong password. The system will verify the password strength.
Keep your password secure. The system cannot retrieve it if it is lost.
Confirm Password
This password must be consistent with the administrator password.
Parameter Template
A template of parameters for creating an instance. The template contains API configuration values that are applied to one or more instances.
After an instance is created, you can modify its parameters to better meet your service requirements. For details, see Modifying Parameters of GeminiDB Influx Instances.
Enterprise Project
This parameter is provided for enterprise users.
An enterprise project groups cloud resources, so you can manage resources and members by project. The default project is default.
Select an enterprise project from the drop-down list. For more application information about enterprise projects, see Enterprise Management User Guide.
Table 6 Tags Parameter
Description
Tags
The setting is optional. Adding tags helps you better identify and manage your GeminiDB Influx instances. Each instance supports up to 10 tags by default. To use more tags, contact customer service to request a quota of 20 tags.
If your organization has configured a tag policy for a GeminiDB Influx instance, you need to add a tag to the instance based on the tag policy. If the tag does not comply with the tag policy, the instance may fail to be created. Contact the organization administrator to learn details about the tag policy.
A tag consists of a tag key and a tag value.
- Tag key: mandatory if the instance is going to be tagged
Each tag key is unique for each instance. The key can include up to 36 characters, including digits, letters, underscores (_), and hyphens (-).
- Tag value: optional if the instance is going to be tagged
The value can contain up to 43 characters, including digits, letters, underscores (_), periods (.), and hyphens (-).
After an instance is created, you can view its tag details on the Tags tab. In addition, you can add, modify, and delete tags of an existing instance. For details, see Managing Tags.
Table 7 Required duration Parameter
Description
Required Duration
The length of your subscription if you select Yearly/Monthly billing. Subscription lengths range from one month to three years.
Auto-renew
- This option is not selected by default.
- If you select this option, the renew cycle is the same as the selected duration.
- Yearly/Monthly
- On the displayed page, confirm instance details.
- For yearly/monthly instances
- To modify the configurations, click Previous.
- If no modification is required, read and agree to the service agreement, click Pay Now, and complete the payment.
- Pay-per-use
- To modify the configurations, click Previous.
- If you do not need to modify the settings, read and agree to the service agreement and click Submit.
- For yearly/monthly instances
- Click Back to Instance Management to go to the instance list.
- On the Instances page, view and manage the created instance.
- Creating an instance takes about 5 to 9 minutes. During the process, the instance status displayed in the instance list is Creating.
- After the creation is complete, the instance status changes to Available.
You can click in the upper right corner of the page to refresh the instance status.
- Automated backup is enabled by default during instance creation. A full backup is automatically triggered after an instance is created.
- The default database port of the instance is 8635 and cannot be changed.
Figure 4 Successful purchase
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot