Help Center> Direct Connect> FAQs> Popular Questions> What Are the Network Requirements for Connections?

Updated on 2023-06-15 GMT+08:00

View PDF

What Are the Network Requirements for Connections?

Your on-premises network must use a single-mode fiber with a 1GE, 10GE, 40GE, or 100GE optical module to connect to the access device in the cloud. In addition, key parameters such as the LC, wavelength, and distance must be aligned with the Direct Connect location you select, for example, 1GE, LC, single-mode, 1310nm, 10 KM.
Auto-negotiation for the port must be disabled. Port speed and full-duplex mode must be manually configured.
802.1Q VLAN encapsulation must be supported on the entire connection, including intermediate devices.
Your device must support BGP and BGP MD5 authentication or static routing.
(Optional) You can configure BFD on your network.
The maximum transmission unit (MTU) supported at the physical layer cannot exceed 1,522 bytes (14-byte Ethernet header + 4-byte VLAN tag + 1,500-byte IP datagram + 4-byte frame check sequence). The recommended value is 1500.
Private IP addresses are recommended both on and off the cloud, and the IP address ranges used for communications cannot overlap.

Parent topic: Popular Questions

Thank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.

The system is busy. Please try again later.

Which of the following issues have you encountered?

Content is inconsistent with the product UI

Unclear descriptions

Lack of examples or code

Incorrect steps

Can't find what I need

Lack of best practices

Feedback (optional)

0/500

Select at least one type of issue, and enter your comments or suggestions.

Enter a maximum of 500 characters.

Submit Cancel

For any further questions, feel free to contact us through the chatbot.

more