Error Codes
An example response error is returned as follows:
{ "error_code": xxxx,//Error code "error_msg": xxxxx//Error message }
Table 1 describes the error codes.
Status Code |
Error Code |
Error Message |
Description |
Solution |
---|---|---|---|---|
400 |
CSBS.0001 |
Service over limit |
The number of backup policies has reached the upper limit. |
Delete an existing backup policy and try again. |
400 |
CSBS.6000 |
server do not exist |
The server does not exist. |
Check whether the server exists. |
400 |
CSBS.6001 |
The server has stopped. |
The server has stopped. |
Check whether the server has stopped. |
400 |
CSBS.6003 |
Resource (%s) type (%s) is not support protection. |
Currently, only cloud server backup is supported. |
Select servers and add them to the backup policy. |
400 |
CSBS.6005 |
Server (%s) is already in service. |
The current server status does not allow backup. |
Ensure that the server status allows restoration and try again. |
400 |
CSBS.6006 |
Server (%s) status (%s) is not allowed to protect. |
This type of server does not support backup. |
Select servers of a correct type. |
400 |
CSBS.6007 |
No volume attached to the server (%s) for protect. |
Servers without EVS disks do not support backup. |
Check whether an EVS disk is attached to the server. |
400 |
CSBS.6010 |
Volume (%s) attached to server (%s) is shareable volume. |
The server does not support backup, because it hosts shared EVS disks. |
Remove the shared disk and perform the backup again. |
400 |
CSBS.6013 |
Resource (%s) type (%s) is not support restoration. |
Only server restoration is supported currently. |
Select servers for restoration. |
400 |
CSBS.6014 |
Volume(s) (%s) not found in target server. |
The specified EVS disk is not attached to the server to be restored. |
Select an EVS disk attached to the server to be restored. |
400 |
CSBS.6015 |
The server is restoring. |
The server in the current status cannot be restored. |
Ensure that the server status allows restoration and try again. |
400 |
CSBS.9001 |
provider invalid |
Parameter verification failed. |
Enter the correct parameter. |
403 |
CSBS.9009 |
User is unverified. |
The user is not authenticated by real name. Authenticate the user's real name and try again. |
Authenticate the user's real name and try again. |
400 |
CSBS.9009 |
The backup or replication space after reduction cannot be less than the used space. |
The backup or replication space after applying for reduction is less than the used space. |
Ensure that the remaining space is greater than the used space. |
500 |
CSBS.9998 |
System not support |
Service unavailable |
Try later or contact technical support. |
500 |
CSBS.9999 |
%s failed |
System internal error |
Try later or contact technical support. |
400 |
CSBS.0002 |
Volume of services from different storagetype |
The volumes of the server have different storage types. (Not used currently.) |
Use the same type of volumes. |
400 |
BackupService.4003 |
Your data has been migrated successfully. Go to the CBR console page for further operations. The current page will no longer provide services. |
Your data has been migrated successfully. Go to the CBR console page for further operations. The current page will no longer provide services. |
Go to CBR Console to use the backup function. |
400 |
BackupService.4008 |
This service is available for existing users only. If you are new users, go to CBR Console to use Cloud Backup and Recovery. |
This service is available for existing users only. If you are new users, go to CBR Console to use Cloud Backup and Recovery. |
Go to CBR Console to use the backup function. |
500 |
CSBS.1001 |
The policy is executing backup. |
The backup task cannot be executed, because a manual backup task is being executed. |
Re-execute the backup task after the manual backup task is complete. |
400 |
CSBS.2003 |
item in executing |
The selected backup is in the Backing up, Restoring, or Deleting state. |
Try again after the task is complete. |
400 |
CSBS.2004 |
item in plan executing |
The policy is being executed for backup. Try again after the backup is complete. |
Try again after the task is complete. |
404 |
CSBS.3001 |
Checkpoint_item (%s) is not found. |
The backup does not exist. |
Check whether the backup exists. |
400 |
CSBS.6027 |
The AZ where the resource (%s) is located does not support backup. |
The AZ to which the ECS belongs does not support backup. |
Contact the administrator to reconfigure the AZ. |
500 |
CSBS.6030 |
auto plan executing |
The backup task cannot be executed, because an automatic backup task is being executed. |
Re-execute the backup task after the automatic backup task is complete. |
400 |
CSBS.6031 |
manual copy executing |
The replication task cannot be executed, because a manual replication task is being executed. |
Re-execute the replication task after the manual replication task is complete. |
500 |
CSBS.6032 |
plan has no resource backup |
There are no servers that can be backed up in the backup policy. |
Bind the policy to servers or wait until the bound server is restored to a state that supports backup. |
400 |
CSBS.6033 |
Service type of volume %s(belong to server %s) is dss. |
A server with DSS disks cannot be backed up. |
Check whether a dedicated storage disk has been attached to the server. |
400 |
CSBS.6061 |
volume of server in this pod does not support backup |
The current server does not support backup or restoration. |
Deselect the disks that do not support backup and retry. |
500 |
CSBS.8001 |
The backup status is not allowed to create image |
Backups in the current status cannot be registered as images. |
Try later or contact technical support. |
400 |
CSBS.8007 |
The backup {checkpoint_item_id} has register to image, can't be delete |
An image has been created by using the backup and the backup cannot be deleted. |
Delete the created image first and then the backup. |
500 |
CSBS.8008 |
The backup {checkpoint_item_id}'s status is not allowed query |
The current backup status does not support query. |
Check whether the backup exists. |
500 |
CSBS.8009 |
The backup has not system disk backup is not allowed to create image |
The backup does not contain the system disk data and cannot be used to create an image. |
Check whether the backup contains a system disk. |
400 |
CSBS.9006 |
Quota exceeded for resources: %s |
Insufficient quota |
Contact the administrator to change the quota or delete the backups that are no longer needed. |
500 |
CSBS.1002 |
resource_in_protecting |
The selected server is being backed up. (Not used currently.) |
Try again after the backup task is complete. |
500 |
CSBS.2001 |
item in plan is executing |
A task is being executed by using this backup policy. (Not used currently.) |
Try again after the task is complete. |
404 |
CSBS.3000 |
plan not found |
The backup policy does not exist. |
Check whether the backup policy exists. |
500 |
CSBS.5001 |
Scheduel operation status can't be set unable |
Failed to stop the policy. |
Check the backup policy status. |
400 |
CSBS.6004 |
Server (%s) is already in service. |
The server has been bound to a backup policy and cannot be bound again. |
Check whether the server has been bound to a backup policy. |
400 |
CSBS.9007 |
duplicate service name |
The backup policy name already exists. |
Change the name and try again. |
400 |
CSBS.4000 |
checkpoint item not available |
The current backup status does not allow restoration. |
Try again later or contact technical support. |
400 |
CSBS.6016 |
can not restore server type is not allow |
This type of server does not support restoration. |
Select servers of a correct type. |
400 |
CSBS.6017 |
Can not find backup(s) (%s) in checkpoint item (%s). |
The specified backup disk is not in the specified backup. |
Select a backup disk in the specified backup for restoration. |
400 |
CSBS.6018 |
Not assign backup(s) (%s) to volume(s), partial restore is not supported." |
The system does not support the restoration of some backup disks in the backup. |
Select all backup disks in the backup for restoration. |
500 |
CSBS.6019 |
The source server (%s) type (%s) is not the same as the target server (%s) type (%s). |
The type of the target server is different from that of the source server. |
Select a target server of the same type as the source server. |
400 |
CSBS.6020 |
No volume attached to the server (%s) for restore. |
Servers without EVS disks do not support restoration. |
Check whether an EVS disk is attached to the server. |
400 |
CSBS.6021 |
Volume (%s) attached to server (%s) is shareable volume. |
The backup cannot be restored to a shared EVS disk of the server. |
Restore the backup to a non-shared EVS disk of the server. |
500 |
CSBS.6023 |
Can not restore data volume to system volume. server id is (%s). |
The backup for a data disk cannot be restored to a system disk of the server. |
Restore the backup to a data disk of the server. |
400 |
CSBS.6024 |
Target volume (%s) size (%s) small than volume backup (%s) size (%s). |
Restoration cannot be executed because the size of the disk attached to the server is smaller than the backup size. |
Expand the disk and try again, or restore backup data to a disk that has a larger size than the backup. |
400 |
CSBS.6025 |
The AZ of local checkpoint item (%s) is not support to restore the resource (%s). |
Restoration is not supported between the AZ to which the specified backup belongs and the AZ to which the server belongs. |
Contact the administrator to reconfigure the AZ. |
400 |
CSBS.9008 |
Checkpoint Item Status Not Support Create VM |
Only backups in the Available state can be used to create ECSs. |
Check whether the backup is available. |
404 |
CSBS.6040 |
task not found |
The backup job to be deleted does not exist. |
Check whether the backup job exists. |
Karbor native APIs:
http://developer.openstack.org/api-ref/data-protection-orchestration/v1/index.html
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot