ALM-135463092 hwChassisFail

Description

The chassis partially failed. (EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=[EntityTrapFaultID], Reason=[Reason])

A chassis experienced a partial failure.

Attribute

AlarmID	Alarm OID	Alarm Severity	Alarm Type
135463092	1.3.6.1.4.1.2011.5.25.219.2.1.3	Critical	Equipment alarm

Parameters

Name	Meaning
OID	Indicates the MIB object ID of the alarm.
EntPhysicalIndex	Index of a physical entity.
EntPhysicalName	Entity name.
EntityTrapFaultID	Alarm cause.
Reason

Impact on the System

The system may become abnormal.

Possible Causes

Cause 1: Different SFUs were installed in the same chassis.
Cause 2: The system power or the power of the backup power supply is insufficient.
Cause 3: No SFU is present in the chassis.
Cause 4: No LPU is present in the chassis.
Cause 5: No CMU is present in the chassis.
Cause 6: The power module types are inconsistent.
Cause 7: Failed to obtain slot information of the power supply.
Cause 8: There is two or more fans not detected.
Cause 9: The number of detected SFUs does not meet requirements.

Procedure

Cause 1: Different SFUs were installed in the same chassis.
1. Insert the correct SFU.
Cause 2: The system power or the power of the backup power supply is insufficient.
1. Add a power module.
Cause 3: No SFU is present in the chassis.
1. Insert the SFU.
Cause 4: No LPU is present in the chassis.
1. Insert the LPU.
Cause 5: No CMU is present in the chassis.
1. Insert the CMU.
Cause 6: The power module types are inconsistent.
1. Install only DC or AC power modules into all the power slots on the device.
Cause 7: Failed to obtain slot information of the power supply.
1. Insert the power module into another slot. If the alarm persists, replace the power module.
Cause 8: There is two or more fans not detected.
1. Install all the fan modules.
Cause 9: The number of detected SFUs does not meet requirements.
1. Insert the SFU.