What Do I Do If a Service Port Is Used by a One-Click Password Reset Plug-in?
Cause
- If the one-click password reset plug-in of a BMS works in AUTO mode, when the plug-in is started, it randomly uses a port, which may be a service port.
- Existing BMSs still work in AUTO mode, in which the plug-in randomly uses a service port ranging from 31000 to 32999. The system will automatically select an idle port with the smallest port number.
Recommended Solution 1
Change the work mode of the one-click password reset plug-in Wraper from AUTO (SOCKET) to PIPE. After the change, the plug-in will not use service ports.
- Open the CloudResetPwdAgent configuration file.
- Add the following content to the end of the file:
wrapper.backend.type=PIPE
- Restart the CloudResetPwdUpdateAgent service.
Solution 2
Modify the CloudResetPwdAgent configuration to change the default port range for the password reset plug-in (31000-32999) so that the service port is out of the port range.
For example, to change the port range to 40000-42000, perform the following operations:
- Open the CloudResetPwdAgent configuration file.
- Add the following content to the end of the file:
wrapper.port.min=40000 wrapper.port.max=41000 wrapper.jvm.port.min=41001 wrapper.jvm.port.max=42000
- Restart the CloudResetPwdUpdateAgent service.
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot