Extending the Volume Group by Adding an EVS Disk

Scenarios

If the space of an LVM volume group no longer meets your needs, you can extend the volume group by adding new EVS disks, creating physical volumes, and adding the physical volumes to the volume group.

Figure 1 Example of extending a volume group

Procedure

1. Create an EVS disk and attach it.
   1. Log in to the management console.
   2. Under Storage, click Elastic Volume Service. The disk list page is displayed.
   3. Click Buy Disk and create a disk.

      For details, see Purchasing an EVS Disk.

   4. In the disk list, locate the new disk and click Attach in the Operation column.
   5. On the displayed page, select the target ECS and select a device name from the drop-down list. Ensure that the EVS disk and ECS reside in the same AZ.

      Return to the disk list page. The status of the disk is Attaching, indicating that the disk is being attached to the ECS. When the disk status changes to In-use, the disk is successfully attached.

2. Log in to the ECS as user root.
3. Run the following command to query the volume group size:

   vgdisplay

   Information similar to the following is displayed:

   [root@ecs-lvmtest ~]# vgdisplay
     --- Volume group ---
     VG Name               vgdata
     System ID
     Format                lvm2
     Metadata Areas        2
     Metadata Sequence No  3
     VG Access             read/write
     VG Status             resizable
     MAX LV                0
     Cur LV                1
     Open LV               1
     Max PV                0
     Cur PV                2
     Act PV                2
     VG Size               19.99 GiB
     PE Size               4.00 MiB
     Total PE              5118
     Alloc PE / Size       4864 / 19.00 GiB
     Free  PE / Size       254 / 1016.00 MiB
     VG UUID               NLkZV7-hYYE-0w66-tnlt-Y6jL-Ik7S-76w4P6

   In the command output, the VG Size value indicates the volume group size, which is 19.99 GiB.

4. Run the following command to view and take note of the device names:

   fdisk -l | grep /dev/vd | grep -v vda

   Information similar to the following is displayed:

   [root@ecs-lvmtest ~]# fdisk -l | grep /dev/vd | grep -v vda
   Disk /dev/vdb: 10.7 GB, 10737418240 bytes, 20971520 sectors
   Disk /dev/vdc: 10.7 GB, 10737418240 bytes, 20971520 sectors
   Disk /dev/vdd: 10.7 GB, 10737418240 bytes, 20971520 sectors

   In the command output, the new EVS disk has been attached to the ECS, and the device name is /dev/vdd.

5. Run the following command to create a physical volume using the new EVS disk:

   pvcreate Disk device name

   In this example, run the following command:

   pvcreate /dev/vdd

   Information similar to the following is displayed:

   [root@ecs-lvmtest ~]# pvcreate /dev/vdd
     Physical volume "/dev/vdd" successfully created.

6. Run the following command to extend the volume group by adding the physical volume to the volume group:

   vgextend Volume group name Physical volume name

   In this example, run the following command:

   vgextend vgdata /dev/vdd

   Information similar to the following is displayed:

   [root@ecs-lvmtest ~]# vgextend vgdata /dev/vdd
     Volume group "vgdata" successfully extended

7. Run the following command to query details of the volume group:

   vgdisplay

   Information similar to the following is displayed:

   [root@ecs-lvmtest ~]# vgdisplay
     --- Volume group ---
     VG Name               vgdata
     System ID
     Format                lvm2
     Metadata Areas        3
     Metadata Sequence No  4
     VG Access             read/write
     VG Status             resizable
     MAX LV                0
     Cur LV                1
     Open LV               1
     Max PV                0
     Cur PV                3
     Act PV                3
     VG Size               <29.99 GiB
     PE Size               4.00 MiB
     Total PE              7677
     Alloc PE / Size       4864 / 19.00 GiB
     Free  PE / Size       2813 / <10.99 GiB
     VG UUID               NLkZV7-hYYE-0w66-tnlt-Y6jL-Ik7S-76w4P6

   In the command output, 10 GB has been added to the VG Size volume group.