Logs

Scenarios

You can use logs when you want to know the statuses of messages published to a topic. Protocols including SMS, FunctionGraph (function), email, HTTP, and HTTPS are supported. Before configuring logs, you need to interconnect SMN with Log Tank Service (LTS) and have created a log group and log stream to be associated. For details about how to configure and operate LTS, see Log Tank Service User Guide.

Configuring Cloud Logs

Create a log group.
1. Log in to the management console.
2. Click on the upper left to select the desired region and project.
3. In the upper left corner of the page, click . Select Log Tank Service under Management & Governance.
  The LTS console is displayed.
4. In the navigation pane on the left, choose Log Management.
  The Log Management page is displayed.
5. Click Create Log Group. In the displayed dialog box, enter a log group name.
6. Click OK.
Create a log stream.
1. Locate the created log group and click its name.
2. Click Create Log Stream. In the displayed dialog box, enter a name for the log stream.
3. Click OK.

Configuring Message Transmission Logs

On the SMN console, configure logs.

Set this parameter on the Create Topic page.
1. Log in to the management console.
2. In the upper left corner of the page, click and select the desired region and project.
3. In the upper left corner of the page, click . Select Simple Message Notification under Management & Governance.
  The SMN console is displayed.
4. In the navigation pane on the left, choose Topic Management > Topics.
  The Topics page is displayed.
5. On the Topics page, click the name of the topic to be configured.
6. On the displayed page, click the Message Transfer Logs tab and click Configure Access Logs.
  Figure 1 Logs
7. Click Start Logging and select the log group and log stream that you have created on the LTS console.
  Figure 2 Configure Log
8. Click OK.

Viewing Access Logs

You can view details about logs you configured.

Log format

{"message_id":"$message_id","project_id":"$project_id","topic_urn":"$topic_urn","subscriber_urn":"$subscriber_urn","protocol_name":"$protocol_name","endpoint":"$endpoint","status":"$status","http_code":$http_code,"create_time":"$create_time","send_time":"$send_time"}

The log format cannot be modified. Table 1 describes the log fields.

**Table 1** Parameters in a FunctionGraph (function) message
Parameter	Type	Description
message_id	String	Message ID
project_id	String	Project ID
topic_urn	String	Resource identifier of a topic, which is unique
subscriber_urn	String	Resource identifier of a subscription, which is unique
protocol_name	String	Specifies the subscription protocol. (Different protocols indicate different types of endpoints to receive messages.) The following protocols are supported: Email: The endpoints are email addresses. SMS: The endpoints are phone numbers. FunctionGraph: FunctionGraph (function) transmission protocol. The endpoint is a function. FunctionStage: FunctionStage (workflow) transmission protocol. The endpoint is a function workflow. HTTP and HTTPS: The endpoints are URLs.
endpoint	String	Message receiving endpoint
status	String	Message status. The options are as follows: DELIVERED: The message has been delivered. FAIL_DELIVERED: The message fails to be sent. REJECTS: The message has been rejected. The flow control mechanism is triggered.
http_code	Integer	HTTP return code. Only HTTP/HTTPS messages are supported.
create_time	String	Time when a message was created. The UTC time is in YYYY-MM-DDTHH:MM:SSZ format.
send_time	String	Specifies the time when the message was sent. The UTC time is in YYYY-MM-DDTHH:MM:SSZ format.

Example Log

{"message_id":"1ae49922602a42fc83acb9689a2eb5f4","project_id":"5a9f32e4f1ec4bbe9695ff9da51c2925","topic_urn":"urn:smn:regionid:5a9f32e4f1ec4bbe9695ff9da51c2925:demo","subscriber_urn":"urn:smn:regionid:5a9f32e4f1ec4bbe9695ff9da51c2925:demo:b55c3c6fa7cd471b9f24818d530a8740","protocol_name":"https","endpoint":"https://127.0.0.1:443/https","status":"DELIVERED","http_code":200,"create_time":"2022-11-01T00:00:00Z","send_time":"2022-11-01T00:00:10Z"}

The following table describes the fields in the log.

**Table 2** Example values of fields in the log
Parameter	Example Value
message_id	1ae49922602a42fc83acb9689a2eb5f4
project_id	5a9f32e4f1ec4bbe9695ff9da51c2925
topic_urn	urn:smn:regionid:5a9f32e4f1ec4bbe9695ff9da51c2925:demo
subscriber_urn	urn:smn:regionid:5a9f32e4f1ec4bbe9695ff9da51c2925:demo:b55c3c6fa7cd471b9f24818d530a8740
protocol_name	https
endpoint	https://127.0.0.1:443/https
status	DELIVERED
http_code	200
create_time	2022-11-01T00:00:00Z
send_time	2022-11-01T00:00:10Z