Halaman ini belum tersedia dalam bahasa lokal Anda. Kami berusaha keras untuk menambahkan lebih banyak versi bahasa. Terima kasih atas dukungan Anda.
Error Codes
Function
If an error occurs during API calling, a customized error message will be returned. This section describes the meaning of each status code returned by VPCEP.
Error Code Format
STATUS CODE 400
1 2 3 4 |
{ "error_code": "EndPoint.0002", "error_msg": "Parameter error." } |
Descriptions of Error Codes
An error code returned by an API does not correspond to an error message.
Status Code |
Error Code |
Error Message |
Description |
Solution |
---|---|---|---|---|
500 |
EndPoint.0001 |
System error. Please retry. |
System error. Please retry. |
Try again later. If the fault persists, contact technical support. |
400 |
EndPoint.0002 |
Parameter error. |
Parameter error. |
Check whether the parameter is correct. |
401 |
EndPoint.0003 |
Authentication failed or authentication information is invalid. |
Authentication failed or authentication information is invalid. |
Check whether the permission is enabled. |
403 |
EndPoint.0004 |
Authentication information is incorrect or you have no permissions. |
Authentication information is incorrect or you have no permissions. |
Check whether the permission is enabled. |
404 |
EndPoint.0005 |
The requested resource is unavailable. |
The requested resource is unavailable. |
Check whether input parameters are correct. |
400 |
EndPoint.0006 |
Invalid limit. |
Invalid limit. |
Enter a correct limit. |
400 |
EndPoint.0007 |
Invalid action. |
Invalid action. |
Enter a correct action. |
400 |
EndPoint.0009 |
The remote address does not match. |
The remote address does not match. |
Check whether you have the access permission. |
400 |
EndPoint.0010 |
Invalid offset. |
Invalid offset. |
Enter a correct offset. |
504 |
EndPoint.0011 |
The request body is null. |
The request body is null. |
Enter the request body again. |
504 |
EndPoint.0012 |
The request header is null. |
The request header is null. |
Enter a request header. |
504 |
EndPoint.0013 |
The request timed out. |
The request timed out. |
Try again later. If the fault persists, contact technical support. |
400 |
EndPoint.0014 |
Invalid project ID. |
Invalid project ID. |
Enter a correct project ID. |
400 |
EndPoint.0015 |
Invalid specification. |
Invalid specifications. |
Enter correct specifications. |
400 |
EndPoint.0016 |
The number of batch operated resources exceeded the limit. |
The number of batch operated resources exceeded the limit. |
Reduce the number of resources to be batch operated. |
400 |
EndPoint.0017 |
Invalid sort_key. |
Invalid sort key. |
Enter a correct sort key. |
400 |
EndPoint.0018 |
Invalid sort_dir. |
Invalid sort DIR. |
Enter a correct sort DIR. |
400 |
EndPoint.0019 |
Invalid status. |
Invalid status. |
Enter a correct status. |
400 |
EndPoint.0020 |
Invalid VPC ID. |
Invalid VPC ID. |
Enter a correct VPC ID. |
400 |
EndPoint.0021 |
Invalid marker_id. |
Invalid marker ID. |
Enter a correct marker ID. |
400 |
EndPoint.0022 |
The number of requests exceeded the limit. Please try later. |
The number of requests exceeded the limit. Please try later. |
Try again later. |
400 |
EndPoint.0023 |
Invalid subnet_id. |
Invalid subnet ID. |
Enter a correct subnet ID. |
400 |
EndPoint.1003 |
Invalid service name. |
Invalid service name. |
Enter a correct service name. |
400 |
EndPoint.1004 |
Invalid request. |
Invalid request. |
Enter a correct request body. |
400 |
EndPoint.1008 |
Failed to obtain the token. |
Failed to obtain the token. |
Contact technical support. |
400 |
Endpoint.1018 |
Quota exceeded. |
Quota exceeded. |
Contact technical support. |
400 |
EndPoint.1019 |
Invalid route table ID. |
Invalid route table ID. |
Enter a correct route table ID. |
400 |
EndPoint.2001 |
The VPC does not exist. |
The VPC does not exist. |
Enter a correct VPC ID for the current tenant. |
400 |
EndPoint.2002 |
The request input parameter is empty. |
The request input parameter is empty. |
Please input a correct parameter. |
400 |
EndPoint.2003 |
The endpoint service does not exist. |
The VPC endpoint service does not exist. |
Enter a VPC endpoint service. |
400 |
EndPoint.2004 |
The endpoint service is unavailable. |
The VPC endpoint service is unavailable. |
Try again later. If the fault persists, contact technical support. |
404 |
EndPoint.2006 |
The requested endpoint does not exist. |
The requested VPC endpoint does not exist. |
Enter a correct VPC endpoint. |
404 |
EndPoint.2007 |
The endpoint information does not exist. |
The VPC endpoint information is unavailable. |
Enter a correct VPC endpoint and check whether the endpoint is deleted. |
404 |
EndPoint.2008 |
The endpoint has been deleted. |
The VPC endpoint has been deleted. |
Check whether the VPC endpoint is deleted. |
400 |
EndPoint.2009 |
The specification information does not exist. |
The specification is unavailable. |
Enter correct specifications. |
400 |
EndPoint.2010 |
The input parameter subnet ID is empty. |
The subnet ID is left blank. |
Enter a valid subnet ID. |
400 |
EndPoint.2011 |
The input parameter VPC ID is empty. |
The VPC ID is left blank. |
Enter a valid VPC ID. |
400 |
EndPoint.2012 |
You have no permission to connect to the VPC endpoint service. |
You have no permission to connect to the VPC endpoint service. |
Check whether you have the access permission. |
400 |
EndPoint.2013 |
The endpoint does not belong to the endpoint service. |
The VPC endpoint does not belong to the VPC endpoint service. |
Check whether the VPC endpoint is correct. |
400 |
EndPoint.2014 |
The endpoint has connected to the endpoint service. |
The VPC endpoint has connected to the VPC endpoint service. |
Connected. You do not need to connect again. |
400 |
EndPoint.2015 |
The endpoint has been frozen. |
The VPC endpoint has been frozen. |
Contact technical support to confirm the freezing reason. |
400 |
EndPoint.2016 |
The endpoint pool IP address does not exist. |
The VPC endpoint pool IP address does not exist. |
Contact technical support. |
400 |
EndPoint.2017 |
Invalid endpoint ID. |
The ID of the VPC endpoint is invalid. |
Enter a correct VPC endpoint ID. |
400 |
EndPoint.2018 |
The endpoint is being deleted. |
The VPC endpoint is being deleted. |
Select an available VPC endpoint. |
400 |
EndPoint.2019 |
The endpoint is being created. |
The VPC endpoint is being created. |
Try again later. |
400 |
EndPoint.2020 |
qrMac or sgMac does not exist. |
qrMac or sgMac is not found. |
Contact technical support. |
400 |
EndPoint.2021 |
Failed to query the VPC. |
Failed to query the VPC. |
Contact technical support. |
400 |
EndPoint.2022 |
Failed to create an endpoint. |
Failed to create a VPC endpoint. |
Contact technical support. |
400 |
EndPoint.2023 |
CIDR is not found. |
CIDR is not found. |
Contact technical support. |
400 |
EndPoint.2024 |
shadowVpc or shadowPort does not exist. |
shadowVpc or shadowPort is null. |
Contact technical support. |
400 |
EndPoint.2025 |
The endpoint port does not exist. |
The VPC endpoint port is not found. |
Contact technical support. |
400 |
EndPoint.2026 |
VNI is empty. |
VNI is empty. |
Contact technical support. |
400 |
EndPoint.2027 |
Invalid action. |
Invalid action. |
Enter a valid action. |
400 |
EndPoint.2028 |
The endpoint service port or protocol is empty. |
The VPC endpoint service port or protocol is empty. |
Enter a valid port number or protocol. |
400 |
EndPoint.2029 |
The requested endpoint service ID is empty. |
The ID of the requested VPC endpoint service is empty. |
Enter a valid VPC endpoint service ID. |
404 |
EndPoint.2030 |
markerId is empty. |
marker_id is left blank. |
Specify a valid marker_id. |
400 |
EndPoint.2031 |
Only one endpoint is allowed. |
Only one VPC endpoint is allowed. |
A VPC endpoint service allows accepting or rejecting only one VPC endpoint. |
400 |
EndPoint.2033 |
The entered parameter enable_dns is invalid. |
Invalid parameter enable_dns. |
Enter a valid parameter. |
400 |
EndPoint.2034 |
The entered parameter enable_dns is incorrect. |
The entered parameter enable_dns is incorrect. |
Enter a valid parameter. |
400 |
EndPoint.2035 |
The system parameter dns.enable is invalid. |
System parameter dns.enable is invalid. |
Contact technical support. |
400 |
EndPoint.2037 |
The current network does not belong to the VPC. |
The current network does not belong to the VPC. |
Check whether the parameter is correct. |
400 |
EndPoint.2038 |
The pool does not exist. |
The resource pool is not found. |
Contact technical support. |
400 |
EndPoint.2039 |
The route table is being used by another VPC endpoint. |
The route table is being used by another VPC endpoint. |
Contact technical support. |
400 |
EndPoint.2040 |
The VPC endpoint has no route table bound. |
The VPC endpoint has no route table associated. |
Contact technical support. |
400 |
EndPoint.3001 |
Failed to create a port. |
Failed to create a port. |
Contact technical support. |
400 |
EndPoint.3002 |
Invalid permission. |
Invalid permission. |
Contact technical support. |
400 |
EndPoint.3003 |
Invalid port ID. |
Invalid port ID. |
Contact technical support. |
400 |
EndPoint.3004 |
Invalid port. |
Invalid port. |
Contact technical support. |
400 |
EndPoint.3005 |
Failed to delete the endpoint service. |
Failed to delete the VPC endpoint service. |
Contact technical support. |
400 |
EndPoint.3006 |
The endpoint service is being used. |
The VPC endpoint service is being used. |
Contact technical support. |
400 |
EndPoint.3008 |
The port does not exist. |
The port is not found. |
Contact technical support. |
400 |
EndPoint.3009 |
Invalid CIDR. |
Invalid CIDR. |
Contact technical support. |
400 |
EndPoint.3010 |
Invalid IP address. |
Invalid IP address. |
Enter a correct IP address. |
400 |
EndPoint.3011 |
Parameter IP is not required to create an endpoint service (interface). |
Parameter ip is not required to create a VPC endpoint service (interface). |
Enter a correct request body. |
400 |
EndPoint.3013 |
endpointService interface vlan can't have vpcId. |
The request for accessing the VLAN VPC endpoint service cannot contain VPC ID information. |
Enter a correct request body. |
400 |
EndPoint.3014 |
endpointService interface can't have cidr. |
The request for accessing the VPC endpoint service (interface) cannot contain CIDR. |
Enter a correct request body. |
400 |
EndPoint.3015 |
endpointService gateway vlan can't have portId. |
The request for accessing the VLAN VPC endpoint service cannot contain port_id. |
Enter a correct request body. |
400 |
EndPoint.3016 |
endpointService gateway vlan can't have ip. |
The request for accessing the VLAN VPC endpoint service cannot contain IP address information. |
Enter a correct request body. |
400 |
EndPoint.3017 |
Invalid CIDRs. |
Invalid CIDRs. |
Enter correct CIDRs. |
400 |
EndPoint.3018 |
endpointService gateway vlan can't have vpcId. |
The request for accessing the VLAN VPC endpoint service cannot contain VPC ID information. |
Enter a correct request body. |
400 |
EndPoint.3021 |
Invalid serverType. |
Invalid server_type. |
Specify a valid server_type. |
400 |
EndPoint.3022 |
Failed to create a network. |
Failed to create a network. |
Contact technical support. |
400 |
EndPoint.3023 |
Failed to create a subnet. |
Failed to create a subnet. |
Contact technical support. |
400 |
EndPoint.3035 |
Invalid action. |
Invalid action. |
Enter a correct action. |
400 |
EndPoint.3036 |
Invalid permissions. |
The permission list cannot be empty. |
Enter a correct request body. |
400 |
EndPoint.3040 |
Failed to add a rollback task. |
Failed to add a rollback task. |
Contact technical support. |
400 |
EndPoint.3042 |
The port ID does not belong to the current VPC. |
The port ID does not belong to the current VPC. |
Enter a correct request body. |
400 |
EndPoint.3043 |
The service port is invalid. |
Invalid service port. |
Enter a correct request body. |
400 |
EndPoint.3044 |
The parameter ports conflicted with ports in an existing endpoint service. |
This port conflicted with the port of an existing endpoint service. |
Enter a correct request body. |
400 |
EndPoint.3045 |
Other properties cannot be modified in the current endpoint service state. |
Modifying other properties in the current endpoint service state is not supported. |
Enter a correct request body. |
400 |
EndPoint.3046 |
The IP address conflicted with an existing endpoint service. |
The IP address conflicted with an existing VPC endpoint service. |
Enter a correct request body. |
400 |
EndPoint.3049 |
The maximum number of whitelist records has been reached. |
The maximum number of whitelist records has been reached. |
Delete invalid whitelist records or add an asterisk (*). |
400 |
EndPoint.3051 |
Endpoint service vip port id is invalid. |
Invalid vip_port_id. |
Specify a valid vip_port_id. |
400 |
EndPoint.3052 |
portId and ip cannot be modified at the same time. |
port_id and ip cannot be modified at the same time. |
Enter a correct request body. |
400 |
EndPoint.3053 |
vipPortId and ip cannot be modified at the same time. |
vip_port_id and ip cannot be modified at the same time. |
Enter a correct request body. |
400 |
EndPoint.3054 |
portId or vipPortId cannot be modified. |
port_id or vip_port_id cannot be modified. |
Enter a correct request body. |
400 |
EndPoint.3055 |
ip cannot be modified. |
ip cannot be modified. |
Enter a correct request body. |
400 |
EndPoint.3056 |
The maximum of VPC endpoint services using the same IP address has been reached. |
The maximum of VPC endpoint services supported by a backend resource has been reached. |
Contact technical support. |
400 |
EndPoint.3057 |
cidr cannot be modified. |
CIDR cannot be modified. |
Enter a correct request body. |
400 |
EndPoint.3058 |
The domain name is invalid. |
Invalid domain name. |
Enter a correct domain name. |
400 |
EndPoint.3059 |
The domain name already exists. |
The domain name already exists. |
Contact technical support. |
400 |
EndPoint.3060 |
You have no permission to add domain names. |
You have no permission to add domain names. |
Contact technical support. |
400 |
EndPoint.3061 |
The maximum number of domain names has reached. |
The maximum number of domain names has been reached. |
Contact technical support. |
400 |
EndPoint.3062 |
Invalid endpoint service ID. |
Invalid VPC endpoint service ID. |
Enter a correct parameter. |
400 |
EndPoint.3063 |
Invalid port ID. |
Invalid port ID. |
Enter a correct port ID. |
400 |
EndPoint.3066 |
The tag cannot be empty. |
The tag cannot be empty. |
Enter a correct request body. |
400 |
EndPoint.3067 |
The tag key cannot be duplicated. |
The tag key cannot be duplicated. |
Enter a correct request body. |
400 |
EndPoint.3068 |
Tag keys and values should meet relevant requirements. |
Tag keys and values must meet relevant requirements. |
Enter a correct request body. |
400 |
EndPoint.3069 |
The maximum number of tags has been reached. |
The maximum number of tags has been reached. |
Contact technical support. |
400 |
EndPoint.3070 |
Invalid resource type. |
Incorrect resource type. |
Contact technical support. |
400 |
EndPoint.3071 |
The tag value cannot be duplicated. |
Tag values cannot be duplicated. |
Contact technical support. |
400 |
EndPoint.3072 |
The tag key size is invalid. |
The tag key size is invalid. |
Enter a correct tag key. |
400 |
EndPoint.3073 |
The tag value size is invalid. |
The tag value size is invalid. |
Enter a correct tag value. |
400 |
EndPoint.3074 |
The maximum of ports has been reached. |
The maximum of port mappings has been reached. |
Contact technical support. |
400 |
EndPoint.3075 |
The protocol is invalid. |
Invalid protocol. |
Contact technical support. |
400 |
EndPoint.3076 |
Invalid service name. |
Invalid service name. |
Enter a valid service name. |
400 |
EndPoint.4001 |
Failed to query the subnet. |
Failed to query the subnet. |
Contact technical support. |
400 |
EndPoint.4002 |
Failed to create a subnet. |
Failed to create a subnet. |
Contact technical support. |
400 |
EndPoint.4003 |
Failed to delete the subnet. |
Failed to delete the subnet. |
Contact technical support. |
404 |
EndPoint.4004 |
The subnet is not found. |
The subnet does not exist. |
Check the entered subnet ID. If the fault persists, contact technical support. |
400 |
EndPoint.4005 |
Failed to query the network. |
Failed to query the network. |
Contact technical support. |
400 |
EndPoint.4006 |
Failed to create a network. |
Failed to create a network. |
Contact technical support. |
400 |
EndPoint.4007 |
Failed to delete the network. |
Failed to delete the network. |
Contact technical support. |
404 |
EndPoint.4008 |
Network is unavailable. |
Network is unavailable. |
Contact technical support. |
400 |
EndPoint.4009 |
Failed to query the port. |
Failed to query the port. |
Contact technical support. |
400 |
EndPoint.4010 |
Failed to create a port. |
Failed to create a port. |
Contact technical support. |
400 |
EndPoint.4011 |
Failed to delete the port. |
Failed to delete the port. |
Contact technical support. |
404 |
EndPoint.4012 |
The port is not found. |
The port is not found. |
Contact technical support. |
400 |
EndPoint.4013 |
Failed to query the proxy. |
Failed to query the proxy. |
Contact technical support. |
400 |
EndPoint.4014 |
Failed to query the router. |
Failed to query the router. |
Contact technical support. |
400 |
EndPoint.4015 |
The router is not found. |
The router is not found. |
Contact technical support. |
400 |
EndPoint.4016 |
Failed to add an interface router. |
Failed to add an interface router. |
Contact technical support. |
400 |
EndPoint.4017 |
Failed to delete the interface router. |
Failed to delete the interface router. |
Contact technical support. |
400 |
EndPoint.4018 |
Failed to add an extension router. |
Failed to add the extended router. |
Contact technical support. |
400 |
EndPoint.4019 |
Failed to delete the extension router. |
Failed to delete the extended router. |
Contact technical support. |
400 |
EndPoint.4020 |
Failed to query Neutron L3 Agent. |
Failed to query Neutron L3 Agent. |
Contact technical support. |
404 |
EndPoint.4021 |
Neutron L3 Agent is not found. |
Neutron L3 Agent is not found. |
Contact technical support. |
400 |
EndPoint.4025 |
The specification is being used. |
The specification is being used. |
Contact technical support. |
400 |
EndPoint.4026 |
Failed to query the default route table of the VPC. |
Failed to query the default route table of the VPC. |
Contact technical support. |
400 |
EndPoint.4027 |
Failed to query route tables of the VPC. |
Failed to query route tables of the VPC. |
Contact technical support. |
400 |
EndPoint.4028 |
Failed to add routes to the VPC's route table. |
Failed to add routes to the VPC's route table. |
Contact technical support. |
400 |
EndPoint.4029 |
Failed to remove routes from the VPC's route table. |
Failed to remove routes from the VPC's route table. |
Contact technical support. |
404 |
EndPoint.4030 |
The route table is not found. |
The route table is not found. |
Contact technical support. |
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot