Step 1: Create a DB Instance

Scenarios

This section describes how to create a DB instance on the RDS console.

The DB instance class and storage space you need depend on your processing power and memory requirements.

Procedure

Log in to the management console.
Click in the upper left corner and select a region and a project.
Click Service List. Under Database, click Relational Database Service. The RDS console is displayed.
On the Instance Management page, click Create DB Instance.

On the displayed page, configure information about your DB instance. Then, click Create Now.

**Table 1** Basic information
Parameter	Description
Region	The region where your RDS resources will be located. You can change it on the creation page, or go back to the Instance Management page and change it in the upper left corner. NOTE: Products in different regions cannot communicate with each other through a private network and you cannot change the region of a DB instance after creating the instance. Therefore, exercise caution when selecting a region.
DB Instance Name	Must start with a letter and consist of 4 to 64 characters. Only letters, digits, hyphens (-), and underscores (_) are allowed.
DB Engine	Set to Microsoft SQL Server.
DB Engine Version	For details, see DB Engines and Versions. Different DB engine versions are supported in different regions. You are advised to select the latest available version because it is more stable, reliable, and secure.
DB Instance Type	Primary/Standby: uses an HA architecture with a primary DB instance and a synchronous standby DB instance. It is suitable for production databases of large- and medium-sized enterprises in Internet, Internet of Things (IoT), retail e-commerce sales, logistics, gaming, and other sectors. The standby DB instance improves instance reliability and is invisible to you after being created. An AZ is a physical region where resources use independent power supply and networks. AZs are physically isolated but interconnected through an internal network. You can deploy primary and standby DB instances in a single AZ or across AZs to achieve failover and high availability. Single: uses a single-node architecture, which is more cost-effective than primary/standby DB instances. It is suitable for development and testing of microsites, and small- and medium-sized enterprises, or for learning about RDS.
Storage Type	Determines the DB instance read/write speed. The higher the maximum throughput is, the higher the DB instance read/write speed can be. High I/O: supports a maximum throughput of 150 MB/s. Ultra-high I/O: supports a maximum throughput of 350 MB/s.
Time Zone	Select your time zone when you are creating a DB instance. After the DB instance is created, the time zone cannot be modified.
Server Collation	Defines a collation of a database or table column, or a collation cast operation when applied to character string expression. It acts as the default collation for the DB instance.

**Table 2** Mapping between time zones and UTC offsets
Time Zone	Standard Time Offset	Remarks
Afghanistan Standard Time	UTC+04:30	Kabul
Alaskan Standard Time	UTC-09:00	Alaska
Arabian Standard Time	UTC+04:00	Abu Dhabi, Muscat
Atlantic Standard Time	UTC-04:00	Atlantic Time (Canada)
AUS Central Standard Time	UTC+09:30	Darwin
AUS Eastern Standard Time	UTC+10:00	Canberra, Melbourne, Sydney
Belarus Standard Time	UTC+03:00	Minsk
Canada Central Standard Time	UTC-06:00	Saskatchewan
Cape Verde Standard Time	UTC-01:00	Cape Verde Is.
Cen. Australia Standard Time	UTC+09:30	Adelaide
Central America Standard Time	UTC-06:00	Central America
Central Asia Standard Time	UTC+06:00	Astana
Central Brazilian Standard Time	UTC-04:00	Cuiaba
Central European Standard Time	UTC+01:00	Belgrade, Bratislava, Budapest, Ljubljana, Prague
Central European Standard Time	UTC+01:00	Sarajevo, Skopje, Warsaw, Zagreb
Central Pacific Standard Time	UTC+11:00	Solomon Islands, New Caledonia
Central Standard Time	UTC-06:00	Central Time (US and Canada)
China Standard Time	UTC+08:00	Beijing, Chongqing, Hong Kong, and Urumqi
E. Africa Standard Time	UTC+03:00	Nairobi
E. Australia Standard Time	UTC+10:00	Brisbane
E. Europe Standard Time	UTC+02:00	Chisinau
E. South America Standard Time	UTC-03:00	Brasilia
Eastern Standard Time	UTC-05:00	Eastern Time (US and Canada)
Georgian Standard Time	UTC+04:00	Tbilisi
GMT Standard Time	UTC	Dublin, Edinburgh, Lisbon, London
Greenland Standard Time	UTC-03:00	Greenland
Greenwich Standard Time	UTC	Monrovia, Reykjavik
GTB Standard Time	UTC+02:00	Athens, Bucharest
Hawaiian Standard Time	UTC-10:00	Hawaii
India Standard Time	UTC+05:30	Chennai, Kolkata, Mumbai, New Delhi
Jordan Standard Time	UTC+02:00	Amman
Korea Standard Time	UTC+09:00	Seoul
Middle East Standard Time	UTC+02:00	Beirut
Mountain Standard Time	UTC-07:00	Mountain Time (US and Canada)
US Mountain Standard Time	UTC-07:00	Arizona
New Zealand Standard Time	UTC+12:00	Auckland, Wellington
Newfoundland Standard Time	UTC-03:30	Newfoundland
Pacific SA Standard Time	UTC-03:00	Santiago
Pacific Standard Time	UTC-08:00	Pacific Time (US and Canada)
Russian Standard Time	UTC+03:00	Moscow/St. Petersburg
SA Pacific Standard Time	UTC-05:00	Bogota, Lima, Quito, Rio Branco
SE Asia Standard Time	UTC+07:00	Bangkok, Hanoi, Jakarta
China Standard Time	UTC+08:00	Kuala Lumpur, Singapore
Tokyo Standard Time	UTC+09:00	Osaka, Sapporo, Tokyo
US Eastern Standard Time	UTC-05:00	Indiana (East)
UTC	UTC	Coordinated Universal Time
UTC-02	UTC-02:00	Coordinated Universal Time–02
UTC-08	UTC-08:00	Coordinated Universal Time–08
UTC-09	UTC-09:00	Coordinated Universal Time–09
UTC-11	UTC-11:00	Coordinated Universal Time–11
UTC+12	UTC+12:00	Coordinated Universal Time+12
W. Australia Standard Time	UTC+08:00	Perth
W. Central Africa Standard Time	UTC+01:00	West Central Africa
W. Europe Standard Time	UTC+01:00	Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna

**Table 3** Instance specifications
Parameter	Description
Instance Class	Refers to the CPU and memory of a DB instance. Different instance classes have different numbers of database connections and different maximum IOPS. For details about instance classes, see DB Instance Classes. After a DB instance is created, you can change its CPU and memory. For details, see Changing a DB Instance Class.
Storage Type	Determines the DB instance read/write speed. The higher the maximum throughput is, the higher the DB instance read/write speed can be. High I/O: supports a maximum throughput of 150 MB/s. Ultra-high I/O: supports a maximum throughput of 350 MB/s.
Storage Space (GB)	Contains the file system overhead required for inode, reserved block, and database operation. Storage space can range in size from 40 GB to 4,000 GB and can be scaled up only by a multiple of 10 GB. After a DB instance is created, you can scale up its storage space. For details, see section Scaling up Storage Space.

**Table 4** Network
Parameter	Description
VPC	A dedicated virtual network in which your RDS DB instances are located. A VPC can isolate networks for different services. You can select an existing VPC or create a VPC. For details on how to create a VPC, see the "Creating a VPC" section in the Virtual Private Cloud User Guide. If no VPC is available, RDS allocates a VPC to you by default. NOTICE: After the DB instance is created, the VPC cannot be changed.
Subnet	Improves network security by providing dedicated network resources that are logically isolated from other networks. Subnets take effect only within an AZ. The Dynamic Host Configuration Protocol (DHCP) function is enabled by default for subnets in which you plan to create RDS DB instances and cannot be disabled.
Security Group	Enhances security by controlling access to RDS from other services. You need to add inbound rules to a security group so that you can connect to your DB instance. If no security group is available, RDS allocates a security group to you by default.

**Table 5** Database configuration
Parameter	Description
Administrator	The default login name for the database is rdsuser.
Administrator Password	Must consist of 8 to 32 characters and contain at least three types of the following characters: uppercase letters, lowercase letters, digits, and special characters (~!@#$%^*-_+?,). Enter a strong password and periodically change it for security reasons. Keep this password secure. The system cannot retrieve it. After a DB instance is created, you can reset this password. For details, see section Resetting the Administrator Password.
Confirm Password	Must be the same as Administrator Password.
Parameter Template	Contains engine configuration values that can be applied to one or more DB instances. If you intend to create primary/standby DB instances, they use the same parameter template. NOTICE: If you use a custom parameter template when creating a DB instance, the specification-related parameter max server memory (MB) in the custom template is not delivered. Instead, the default value is used. You can modify the instance parameters as required after the DB instance is created. For details, see Modifying Parameters.
Enterprise Project	If the DB instance has been associated with an enterprise project, select the target project from the Enterprise Project drop-down list. You can also go to the ProjectMan console to create a project. For details about how to create a project, see the ProjectMan User Guide.

**Table 6** Batch creation
Parameter	Description
Quantity	RDS supports DB instance creation in batches. If you choose to create primary/standby DB instances and set Quantity to 1, a primary DB instance and a standby DB instance will be created synchronously. If you create multiple DB instances at a time, they will be named with four digits appended to the DB instance name. For example, if you enter instance, the first instance will be named instance-0001, the second instance-0002, and so on.

The performance of your DB instance depends on its configurations. Hardware configuration items include the instance specifications, storage type, and storage space.

Confirm the specifications.
- If you need to modify your settings, click Previous.
- If you do not need to modify your settings, click Submit.
To view and manage the DB instance, go to the Instance Management page.
- During the creation process, the DB instance status is Creating. When the creation process is complete, the instance status will change to Available.
- The automated backup policy is enabled by default. An automated full backup is immediately triggered after a DB instance is created.
- The default database port number is 1433. After a DB instance is created, you can change its port number.
  
  For details, see Changing a Database Port.