ALM-303046402 A Port Is Powered on.
Description
WLAN/4/AP_POE_POWER_ON:OID [OID] A port is powered on. (APMAC=[OPAQUE], APName=[STRING], ApIfIndex=[INTEGER], ApEntityPhysicalName=[OCTET], APID=[INTEGER])
The interface meets the following power supply conditions:
- The power is sufficient.
- The PD is identified by the system.
Only the AP4050DN-E, AP4050DN-HD, AP7050DN-E, AP7052DN, AP7152DN, AD9430DN-24, AD9431DN-24X and AD9430DN-12 support this alarm.
Attribute
Alarm ID |
Alarm Severity |
Alarm Type |
---|---|---|
303046402 |
Warning |
equipmentAlarm |
Parameters
Name |
Meaning |
---|---|
OID |
Indicates the MIB object ID of the alarm. |
APMAC |
Indicates the AP's MAC address. |
APName |
Indicates the AP name. |
ApIfIndex |
Indicates the AP interface index. |
ApEntityPhysicalName |
Indicates the AP interface name. |
APID |
Indicates the AP ID. |
Impact on the System
Services are not affected.
Possible Causes
The alarm recovery message is generated after power-off.
Procedure
- This alarm indicates that a fault is rectified, and no action is required.
Related Information
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot