Error Codes
If an error code starting with APIGW is returned after you call an API, rectify the fault by referring to the instructions provided in API Gateway Error Codes.
|
Status Code |
Error Codes |
Error Message |
Description |
Solution |
|---|---|---|---|---|
|
100 |
ModelArts.0116 |
The expected {0} exceeds the quota limit. |
The expected {0} exceeds the quota limit. |
Contact the administrator to increase the quota. |
|
100 |
ModelArts.6768 |
SSH configuration is missing, target image {0} only support SSH dev service. |
SSH configuration is missing, target image {0} only support SSH dev service. |
Select a proper image. |
|
200 |
ModelArts.4606 |
The sample has been reviewed. |
The sample has been reviewed. |
Proceed with follow-up operations. |
|
200 |
ModelArts.4900 |
Training job prepared. |
The training job has been prepared. |
Proceed with follow-up operations. |
|
200 |
ModelArts.4902 |
Exporting labels. |
Labels are being exported. |
Wait until labels are exported. |
|
200 |
ModelArts.4904 |
Labels exported. |
Labels have been exported. |
Proceed with follow-up operations. |
|
200 |
ModelArts.4910 |
Model import task submitted. |
The model import task has been submitted. |
Proceed with follow-up operations. |
|
200 |
ModelArts.4912 |
Model import task executed. |
The model import task has been executed. |
Proceed with follow-up operations. |
|
200 |
ModelArts.4914 |
Auto labeling task submitted. |
The auto labeling task has been submitted. |
Wait until the task is complete. |
|
200 |
ModelArts.4916 |
Auto labeling task executed. |
The auto labeling task has been executed. |
Proceed with follow-up operations. |
|
200 |
ModelArts.4918 |
Import task submitted. |
The import task has been submitted. |
Wait until the task is complete. |
|
200 |
ModelArts.4920 |
Import task executed. |
The import task has been executed. |
Proceed with follow-up operations. |
|
200 |
ModelArts.4926 |
Collecting hard examples submitted. |
Collecting hard examples has been submitted. |
Wait until the task is complete. |
|
200 |
ModelArts.4950 |
Auto inference task submitted. |
The auto inference task has been submitted. |
Wait until the task is complete. |
|
200 |
ModelArts.4952 |
Auto inference task executed. |
The auto inference task has been executed. |
Proceed with follow-up operations. |
|
200 |
ModelArts.4960 |
Auto grouping task submitted. |
The auto grouping task has been submitted. |
Wait until the task is complete. |
|
200 |
ModelArts.4962 |
Auto grouping task executed. |
The auto grouping task has been executed. |
Proceed with follow-up operations. |
|
200 |
ModelArts.4964 |
Auto grouping task is already running. |
The auto grouping task is already running. |
Please wait. |
|
204 |
ModelArts.2776 |
NotReadyToFetchLog |
not ready for fetch log, wait for training to return data |
Please try again later. |
|
204 |
ModelArts.2777 |
NotReadyToFetchMetric |
not ready for fetch metric, wait for training to return data |
Please try again later. |
|
400 |
ModelArts.0101 |
Invalid Argument. |
Invalid parameter. |
Enter the correct parameter as prompted. |
|
400 |
ModelArts.0102 |
The workspace does not exist. |
The workspace does not exist. |
Check the current workspace. |
|
400 |
ModelArts.0104 |
Parameter error. |
Parameter error. |
Check the parameter settings. |
|
400 |
ModelArts.0107 |
The values of the request parameters ({0},{1}) are invalid. |
Invalid parameter values ({0}, {1}). |
Check whether the parameter values are valid. |
|
400 |
ModelArts.0113 |
Create Notebook failed. Quota: {} is exhausted. |
Failed to create the notebook instance due to the exhausted quota. |
Contact the administrator for a higher quota. |
|
400 |
ModelArts.0118 |
QuotaInsufficient |
The expected %s exceeds the quota limit. |
Release idle resources, or apply for more quotas |
|
400 |
ModelArts.0204 |
Token must contain projectId info. |
No project ID included in the token. |
Ensure that the project token is used. |
|
400 |
ModelArts.0210 |
Invalid project ID. |
The project ID is invalid. |
Check the project ID. |
|
400 |
ModelArts.0420 |
Failed to query agency. |
Failed to query agency. |
System error. Contact technical support. |
|
400 |
ModelArts.0421 |
Failed to create agency. |
Failed to create agency. |
System error. Contact technical support. |
|
400 |
ModelArts.0422 |
Failed to query users. |
Failed to query users. |
System error. Contact technical support. |
|
400 |
ModelArts.0423 |
Disagree with service statement. |
Disagree with service statement. |
System error. Contact technical support. |
|
400 |
ModelArts.0424 |
User authorization information already exists. |
User authorization information already exists. |
Authorization already exists. To update the authorization, delete the original one and add new authorization. |
|
400 |
ModelArts.0425 |
Failed to add user authorization information. |
Failed to add user authorization information. |
System error. Contact technical support. |
|
400 |
ModelArts.0426 |
Failed to delete user authorization information. |
Failed to delete user authorization information. |
System error. Contact technical support. |
|
400 |
ModelArts.0427 |
Failed to get user authorization information. |
Failed to get user authorization information. |
System error. Contact technical support. |
|
400 |
ModelArts.0428 |
Failed to update agency. |
Failed to update agency. |
System error. Contact technical support. |
|
400 |
ModelArts.0429 |
The authorization does not exist. Check whether the user_id is correct. |
The authorization does not exist. Check whether the user_id is correct. |
Check whether the user_id is correct. |
|
400 |
ModelArts.0430 |
Failed to query agency grants. |
Failed to query agency grants. |
System error. Contact technical support. |
|
400 |
ModelArts.0431 |
Failed to query agency quotas. |
Failed to query agency quotas. |
System error. Contact technical support. |
|
400 |
ModelArts.1002 |
OBS operation failed. |
OBS operation failed. |
Ensure that the OBS service is available. |
|
400 |
ModelArts.1003 |
The user account is abnormal (expired or frozen) or the user does not have the permission to perform the OBS operation. |
The user account is abnormal (expired or frozen) or the user does not have the permission to perform the OBS operation. |
For details, see What Do I Do If a Message Indicating Insufficient Permissions Is Displayed When I Use ModelArts? |
|
400 |
ModelArts.1120 |
Parameter verification failed. |
Parameter verification failed. |
System error. Contact technical support. |
|
400 |
ModelArts.2750 |
DuplicateEvalJobName |
Duplicate evaluation job (name %s). |
Change evaluation job name. |
|
400 |
ModelArts.2751 |
DuplicateTrainingJobName |
Duplicate training job (name %s). |
Change training job name. |
|
400 |
ModelArts.2752 |
DuplicateAiAlgorithmNameAndVersion |
An algorithm with the same name and version already exists. |
Check the validity of the algorithm information in the request. |
|
400 |
ModelArts.2753 |
InputsOutputsMessageError |
input and output channel information is not standardized. |
Check the validity of the input and output channel information in the request. |
|
400 |
ModelArts.2754 |
ModelartsHostedNumError |
Only one output channel can be configured as ModelArts hosted output. |
Check the validity of the output path information in the request. |
|
400 |
ModelArts.2755 |
AiAlgorithmNotFound |
algorithm not found. |
Check whether the training project information in the request is valid. |
|
400 |
ModelArts.2756 |
HasSameNameWithMarketAlgorithm |
Duplicate name with subscribed algorithm. |
Check whether the training project information in the request is valid. |
|
400 |
ModelArts.2757 |
CodeDirError |
code directory path error. |
Check whether the training project information in the request is valid. |
|
400 |
ModelArts.2758 |
BootFileDirError |
code startup file path error. |
Check whether the training project information in the request is valid. |
|
400 |
ModelArts.2759 |
TooManyCodeFiles |
Insufficient quota, too many code files, upport uploading up to %s files. |
Please check the number of code files. |
|
400 |
ModelArts.2760 |
CodeFolderTooDeep |
Insufficient quota, too many levels of code directories, supporting up to %s directories |
Please check the code directory depth. |
|
400 |
ModelArts.2761 |
CodeFilesSizeToolarge |
Insufficient quota, the code file takes up too much storage space, supporting up to %s GB |
Please check the code directory depth. |
|
400 |
ModelArts.2762 |
DuplicateFlavorCode |
Duplicate flavor code (%s). |
Change flavor code message. |
|
400 |
ModelArts.2763 |
DoNotHaveFlavor |
The selected flavor is invalid. |
Check the validity of the flavor in the request. |
|
400 |
ModelArts.2764 |
QueryParamsError |
Invalid query parameter (%s). |
Check the validity of the parameter in the request. |
|
400 |
ModelArts.2765 |
StringParameterError |
character variables must be within the preset parameters. |
Please enter the variable value based on the preset range. |
|
400 |
ModelArts.2766 |
DoNotHaveDefaultValue |
Missing default value. |
Please enter the default value. |
|
400 |
ModelArts.2767 |
ParameterKeyRepeat |
parameter key repeat. |
Please rename the parameter name. |
|
400 |
ModelArts.2768 |
DefaultValueTypeError |
Default value does not match parameter type. |
Please check the default parameter type. |
|
400 |
ModelArts.2769 |
DefaultValueIsNotInRange |
default value is not in the setting range. |
Please ensure that the default value is within the range. |
|
400 |
ModelArts.2770 |
RangeError |
Parameter range error. |
Please enter another value range. |
|
400 |
ModelArts.2771 |
NotHavePermission |
No permission to modify. |
Please check the user permission. |
|
400 |
ModelArts.2772 |
OriginalAlgorithmCodeInfoError |
Current algorithm creation failed. To ensure the availability of the algorithm, please reselect the code directory and startup file. |
Please reselect the code directory and startup file. |
|
400 |
ModelArts.2773 |
GetObsObjectContentError |
get obs object content error. |
Please check the file permission. |
|
400 |
ModelArts.2774 |
ParseParameterError |
parse parameter error. |
Hyperparameters are parsed as beta. If the parsing result is improper, manually enter the value. |
|
400 |
ModelArts.2775 |
TrainingJobNotFound |
Training job (ID: %s) not found. |
Check whether the training job information in the request is valid. |
|
400 |
ModelArts.2778 |
EvalJobNotFound |
Model evaluation job (ID: %s) not found. |
Check whether the job ID in the request is valid. |
|
400 |
ModelArts.2779 |
EvalVerNotFound |
Model evaluation job version (ID: %s) not found. |
Check whether the evaluation job version information in the request is valid. |
|
400 |
ModelArts.2780 |
EngineNotFound |
AI engine(id:%s) not found. |
Check whether the engine informer in the request is valid. |
|
400 |
ModelArts.2781 |
FlavorNotFound |
Flavor (%s) not found. |
Check whether the flavor in the request is valid. |
|
400 |
ModelArts.2782 |
DatasetVersionNotFound |
Dataset version (ID: %s) not found. |
Check whether the dataset version ID in the request is valid. |
|
400 |
ModelArts.2783 |
DatasetNotFound |
Dataset (ID: %s) not found. |
Check whether the dataset ID in the request is valid. |
|
400 |
ModelArts.2787 |
InvalidJsonBody |
Invalid JSON request body. |
Check the request body. |
|
400 |
ModelArts.2788 |
InvalidParam |
Invalid parameter(%s). |
Check the request parameter. |
|
400 |
ModelArts.2789 |
UnsupportedFilterBy |
Unsupported filtering item. |
Check whether the filtering item is valid. |
|
400 |
ModelArts.2790 |
UnsupportedSortBy |
Unsupported sorting item. |
Check whether the sorting item is valid. |
|
400 |
ModelArts.2791 |
InvalidObsPath |
Invalid obs path: %s, reason: %s. |
Check the obs path. |
|
400 |
ModelArts.2792 |
BootFileNotBelongToPackage |
The boot_file does not belong to the package_id directory. |
Check whether boot_file and package_id are set correctly. |
|
400 |
ModelArts.2793 |
FlavorOutOfRange |
The number of flavor instances (%d) exceeds the maximum (%d). |
Check the flavor. |
|
400 |
ModelArts.2794 |
InvalidModelURL |
Invalid model URL. |
Check the model URL. |
|
400 |
ModelArts.2795 |
GetModel |
Failed to obtain the model: %s |
Check whether the model is valid. |
|
400 |
ModelArts.2797 |
EvalResultsNotPrepared |
The evaluation results is not generated. |
Wait for the evaluation results generated. |
|
400 |
ModelArts.2798 |
UnsupportedModel |
Unsupported model id:%s |
Check whether the model id is valid. |
|
400 |
ModelArts.2801 |
FederationNotFound |
federation ID (%s) not found. |
Check whether the federation id is valid. |
|
400 |
ModelArts.2802 |
InvalidCodeDir |
Invalid codeDir path: %s. |
Check the codeDir path. |
|
400 |
ModelArts.2804 |
InsufficientPermissionToAuthorize |
The current user does not have sufficient permission to authorize all sub-users of the tenant. |
Please confirm user's iam permission |
|
400 |
ModelArts.2805 |
FederationInviteUserError |
The participant to be invited contains the IAM user ID of the current account(%s). |
Ensure that the user list does not contain the IAM user ID of the current account. |
|
400 |
ModelArts.2806 |
MustHaveCmdAndImage |
Custom image jobs command and engine.url cannot be empty. |
Check whether the command and engine.url is valid. |
|
400 |
ModelArts.2807 |
UnsupportedConditionKey |
Unsupported condition key (%s) |
Check whether the key of search is valid. |
|
400 |
ModelArts.2808 |
UnsupportedConditionOperator |
Unsupported condition operator (%s) |
Check whether the operator of search is valid. |
|
400 |
ModelArts.2809 |
UnsupportedConditionValue |
Unsupported condition value (%s) |
Check whether the value of search is valid. |
|
400 |
ModelArts.2810 |
SWRQueryImageInfoError |
Custom image query failure |
Check whether the image_url is valid. |
|
400 |
ModelArts.2811 |
SWRCreateShareError |
Custom image share-create failure |
Check whether the image_url is valid. |
|
400 |
ModelArts.2812 |
UnsupportedActionType |
Unsupported action type:%s |
Check whether the action type is valid. |
|
400 |
ModelArts.2814 |
AlgorithmNotMatch |
Job algorithm configuration(%s) does not match algorithm management configuration. |
Please check the parameter is valid. |
|
400 |
ModelArts.2815 |
ExceedQuotaLimit |
Exceed quota limit of resource(%s). |
Please release the resources in use or apply for an expanded quota. |
|
400 |
ModelArts.2816 |
ParamRangeError |
The parameter(%s) exceeds the upper limit %s. |
Please enter another value range. |
|
400 |
ModelArts.2817 |
AiAlgorithmShareError |
algorithm(%s) is not ready to share. |
Please wait for the algorithm to complete creation. |
|
400 |
ModelArts.2818 |
LogFileNotGenerated |
the log file is not generated |
Please view the log after the log is generated. |
|
400 |
ModelArts.2819 |
LogFileHasCleared |
the log file has been cleared |
Please select obs url to upload your logs when creating training jobs. |
|
400 |
ModelArts.2820 |
LogPathNotFound |
the log storage path cannot be found |
please use old API to view the log |
|
400 |
ModelArts.2821 |
DuplicateAlgorithmName |
Duplicate algorithm (name %s). |
The algorithm name already exists, Please change algorithm name. |
|
400 |
ModelArts.2822 |
LogExportPathNotSet |
The log export path is not set. |
Please set the log export path. |
|
400 |
ModelArts.2823 |
DomainIdNotMatched |
Policy doesn't allow to be performed. domain id %s, config domain id %s. |
Please check domain id in configfile and Request Header. |
|
400 |
ModelArts.2824 |
SearchIndicatorsError |
The search indicators is duplicate. |
Check whether the search indicators is duplicate. |
|
400 |
ModelArts.2825 |
ParamTypeError |
The parameter (%s) value type error. |
Ensure that the parameter value type is correct. |
|
400 |
ModelArts.2826 |
SearchParamsError |
The search parameters error. |
Please enter another search parameter. |
|
400 |
ModelArts.2827 |
FailureAnalysisNotPossible |
Unable to perform failure analysis on jobs that did not fail. |
Please perform a failure analysis on the failed training job. |
|
400 |
ModelArts.2828 |
FailureAnalysisFailed |
Failed to get the reason for training job failure. |
Unknown failure. Contact technical support. |
|
400 |
ModelArts.2829 |
DuplicateEngineId |
Duplicate training engine (name %s). |
Change training engine name. |
|
400 |
ModelArts.2830 |
MustHaveEngineId |
Custom image jobs engine_id cannot be empty. |
Check whether the engine_id is valid. |
|
400 |
ModelArts.2831 |
FeedbackFailureAnalysisNotPossible |
Failure to provide feedback on failure results. |
Please give feedback on the failed job for which the reason has been analyzed. |
|
400 |
ModelArts.2832 |
EngineNeedUpgrade |
The AI engine verison which you are using is too old, it has been removed. |
Please use the latest version of AI engine. |
|
400 |
ModelArts.2833 |
ExceedeFreeFlavorQuota |
The job quantity exceeds the maximum number (%d) of jobs that can be created by a single user of the free flavor. |
Please delete other free flavor job. |
|
400 |
ModelArts.2834 |
UnsupportedRemoteDataType |
Does not support data type (%s). |
Change to a supported data type. |
|
400 |
ModelArts.2835 |
GetSizeOfChannelTimeOut |
Get size of input channel time out. |
Please get size of folder in local file system or obs service. |
|
400 |
ModelArts.2837 |
FrozenAccount |
The account has been restricted or frozen. |
Please check the account. |
|
400 |
ModelArts.2838 |
WorkspacePolicyLimit |
Policy doesn't allow (%s) to be performed |
Check the configuration of the fine-grained policy in IAM |
|
400 |
ModelArts.2839 |
InvalidMindSporeConfig |
Invalid MindSpore advanced configuration (%s). |
Check the validity of the information in the request. |
|
400 |
ModelArts.2840 |
UnsupportedFlavor |
Engine or resource policy specified cannot be supported on this flavor. |
Please reselect flavor. |
|
400 |
ModelArts.2841 |
DuplicateTrainingExperimentName |
Duplicate training experiment (name: %s). |
Change training experiment name. |
|
400 |
ModelArts.2842 |
TrainingExperimentNotFound |
Training job (id: %s) not found. |
Check whether the training experiment information in the request is valid. |
|
400 |
ModelArts.2843 |
QueryVPCEPFailed |
Query vpc endpoint failed for reason (%s). |
vpcep request failed, Contact technical support. |
|
400 |
ModelArts.2844 |
ChangeVPCEPPolicyFailed |
Change vpc endpoint policy failed for reason (%s). |
vpcep request failed, Contact technical support. |
|
400 |
ModelArts.2845 |
ImageSizeExceeded |
SWR image size exceeded (%dGB > %dGB). |
Please modify your swr image. |
|
400 |
ModelArts.2846 |
TrainingExperimentTypeMismatch |
The type of training job (%s) does not match the type of training experiment (%s). |
Please select a training experiment that matches the training job type. |
|
400 |
ModelArts.2847 |
IEFNodeUnavailable |
The edge node (%s) current status is %s, cannot perform federated training. |
Please select an available edge node. |
|
400 |
ModelArts.2848 |
IEFClientError |
Please check whether the parameter edge_node_id(%s) is correct, error detail: %s. |
Please select an available edge node. |
|
400 |
ModelArts.2849 |
FederationParticipantsReachLimit |
Exceeded maximum federation participants limit. |
Please select other federations with participants below the limit. |
|
400 |
ModelArts.2850 |
FederationDuplicateActivityName |
Duplicate federation activity (name %s). |
The federation activity name already exists, please change it. |
|
400 |
ModelArts.2851 |
FederationDuplicateParticipant |
you have already joined this federation activity(id %s). |
Please select a federation activity that you have not yet joined. |
|
400 |
ModelArts.2853 |
FederationOperationForbidden |
Prohibition of federation activity status transitions from %s to %s. |
This operation is prohibited. |
|
400 |
ModelArts.2854 |
UnsupportedRemoteType |
Unsupported input/output channel remote type. |
Change to a supported channel remote type. |
|
400 |
ModelArts.2855 |
RunUserDeny |
Prohibition of run_user < %d when the training job is not in the dedicated pool. |
This operation is prohibited. |
|
400 |
ModelArts.2856 |
NotOwnImagePublishGalleyError |
Unable to publish this algorithm to gallery, because image of the algorithm is not own to you. |
Please use the algorithm that image is own to you. |
|
400 |
ModelArts.2857 |
InvalidLocalCodeDir |
The local_code_dir parameter verification failed for reason(%s) |
Check the validity of the information in the request. |
|
400 |
ModelArts.2858 |
UnsupportedOperation |
Current operation not supported, (%s). |
Please refer to hints. |
|
400 |
ModelArts.2859 |
InvalidWorkingDir |
The working_dir parameter verification failed for reason(%s) |
Check the validity of the information in the request. |
|
400 |
ModelArts.2879 |
JobRuntimeTypeNotDebug |
Job runtime_type is not debug |
Please adjust job runtime_type to debug |
|
400 |
ModelArts.2880 |
ImageSaveJobExist |
ImageSaveJob is exist |
Please wait ImageSaveJob to be completed |
|
400 |
ModelArts.2883 |
ImageSaveJobSecPhaseNotRunning |
training job secondary_phase is not running |
Please check training job secondary_phase |
|
400 |
ModelArts.2884 |
ImageSwrAlreadyExist |
image tag and image name is exist |
Please check the image tag and name is unique in namespace |
|
400 |
ModelArts.2885 |
AccessImageSwrException |
the access of user swr is exception |
Please check the image namespace is exist or user authorization is enough |
|
400 |
ModelArts.2886 |
NotTrainingPool |
Pool (%s) is not a training pool |
Please check whether the pool supports the training job type |
|
400 |
ModelArts.2887 |
PoolNotRunning |
Pool (%s) is not running |
Please check the status of the pool |
|
400 |
ModelArts.2889 |
GetOsPoolFailed |
Get pool (%s) failed.%s |
Please check the validity of the pool in the request |
|
400 |
ModelArts.2891 |
WorkspaceSetError |
workspace access error,error message is %s, error code is %s |
Please try to solve by error message |
|
400 |
ModelArts.3015 |
Config json file does not conform to the specification. |
The model configuration file does not comply with file specifications. |
Check whether config.json or initial_config complies with the specifications. |
|
400 |
ModelArts.3016 |
Failed to parse config json file because of unsupported fields, types, or formats({0}, {1}). |
Failed to parse the configuration file because the field, type, or format is not supported. |
Check whether the field is correct as prompted. |
|
400 |
ModelArts.3017 |
Failed to publish model because source location noncompliance. |
Failed to publish the model because the model source path does not meet specifications. |
Check whether the source_location value complies with the specifications. |
|
400 |
ModelArts.3023 |
Invalid labels({0}) of model. |
Invalid model label {0}. |
Ensure that a model label starts with a letter or a Chinese character and contains a maximum of 64 characters, including letters, digits, underscores (_), and Chinese characters. |
|
400 |
ModelArts.3024 |
The templateInputs field is incorrectly configured, check if the input is consistent with the template requirements. |
Incorrect configuration. Check whether the configuration complies with the template requirements. |
The parameter configuration does not comply with the template requirements. Modify the configuration. |
|
400 |
ModelArts.3025 |
User ({0}) has only a single share permission and cannot be shared with all users. |
User {0} does not have permission to share data with all users. |
Only the administrator or accounts in the whitelist have permission to share data with all users. |
|
400 |
ModelArts.3026 |
Failed to delete infer format, infer format ({0}) already be used by template. |
Failed to delete input/output mode {0} because it is being used by a template. |
Find the template that is using the input/output mode, disassociate the mode from the template, and delete the mode again. |
|
400 |
ModelArts.3027 |
The model used by the template ({0}) is private and belongs to other users and cannot be shared. |
Input/Output mode {0} used by the template cannot be shared. |
Select another mode. |
|
400 |
ModelArts.3028 |
Failed to publish model, please select input and output mode. |
Failed to publish the model. Select an input/output mode. |
Select another input/output mode and publish the model again. |
|
400 |
ModelArts.3029 |
Model publishing failed because the Template model must provide the template ID used. |
Failed to publish the model because the template ID is unavailable. |
Enter the template ID. |
|
400 |
ModelArts.3030 |
Model publishing failed, template ({0}) does not support modifying its built-in input and output mode. |
Failed to publish the model because the built-in input/output mode of template {0} cannot be changed. |
Do not change the input/output mode of a template when publishing the template model. |
|
400 |
ModelArts.3031 |
Cancel sharing failed, ({0}) has not been shared with other tenants. |
Failed to cancel the sharing because image {0} is not shared with other users. |
Ensure that image {0} is not shared with other users. |
|
400 |
ModelArts.3032 |
Image ({0}) cannot be shared to admin ({1}), please check the image permissions. |
Failed to share image {0} with the administrator {0}. Check the image permission. |
Perform operations according to the error message. |
|
400 |
ModelArts.3033 |
Template publishing failed, please provide template label. |
Failed to publish the template model because its label is left blank. |
Set the model label. |
|
400 |
ModelArts.3034 |
Template model failed to be published, template field is required. |
Failed to publish the template model because the template field is left blank. |
Set template. |
|
400 |
ModelArts.3035 |
Profile preview failed, sourceLocation and previewConfig fields need to provide at least one. |
Failed to preview the configuration file. |
Either source_location or preview_config must be specified. |
|
400 |
ModelArts.3036 |
Parameter verification failed, parameter ({0}) is required. |
Failed to check parameter {0} because it is left blank. |
Set parameters according to the error message. |
|
400 |
ModelArts.3037 |
Parameter ({0}:{1}) is invalid. |
Invalid parameter {0}:{1}. |
Modify passwords as prompted. |
|
400 |
ModelArts.3038 |
When isSpecific is true, domainId is required. |
Failed to perform the operation because domain_id is left blank. |
Set domain_id as prompted. |
|
400 |
ModelArts.3039 |
Template input input_id cannot be repeated. |
Failed to perform the operation because input_id is repetitive. |
Ensure that the input_id value is unique. |
|
400 |
ModelArts.3040 |
When the installer installer is yum or apt-get, and the version packageVersion exists, the version constraint restraint can only be EXACT. |
Failed to perform the operation because restraint can only be EXACT. |
Change the restraint value to EXACT. |
|
400 |
ModelArts.3041 |
When the installer installer is conda or pip, and the version packageVersion exists, the version constraint restraint can only be EXACT, ATLEAST, ATMOST. |
Failed to perform the operation because restraint can only be EXACT, ATLEAST, or ATMOST. |
Change the restraint value to EXACT, ATLEAST, or ATMOST. |
|
400 |
ModelArts.3063 |
Mode unshared failed, the template using this mode has been shared, you need to cancel the sharing of the template first. |
Failed to cancel mode sharing because the template using the mode is being shared. |
Perform operations according to the error message. |
|
400 |
ModelArts.3070 |
There is a model name that does not belong to this tenant: ({0}). |
The model does not belong to user {0}. |
The domain ID of the subscribed model is different from the entered domain ID. Contact the model subscription service and check whether the entered domain ID is correct. |
|
400 |
ModelArts.3072 |
The domain id is the same and does not support subscribing to your own model. |
You cannot subscribe to your own model. |
Use another account to subscribe to the model. |
|
400 |
ModelArts.3074 |
Unable to delete subscribed model. |
Failed to delete the subscribed model. |
Unsubscribe from the model and try again. |
|
400 |
ModelArts.3076 |
Model does not support deploying edge services and cannot broadcast. |
Failed to perform the operation because the model cannot be deployed as an edge service. |
The install_type of the model does not support edge service. |
|
400 |
ModelArts.3077 |
Model is a subscription model that cannot be broadcast. |
Failed to perform the operation because the model has been subscribed. |
The model_source of the model has been set to subscribe. |
|
400 |
ModelArts.3078 |
The model status is not normal and cannot be broadcast. |
Failed to perform the operation because the model status is abnormal. |
Check the model status. |
|
400 |
ModelArts.3079 |
Purchased license, can't cancel subscription. |
Failed to unsubscribe from the model because a license has been configured for the model. |
Delete the license and unsubscribe from the model. |
|
400 |
ModelArts.3514 |
Field [input_params] must be set for the model that is used to deploy the batch service. |
The input_params parameter for the batch service model is left blank. |
Set input_params. |
|
400 |
ModelArts.3515 |
The model {id} cannot be used for deploying services because it is still being published. |
Failed to deploy the service because model {ID} is not ready. |
Try again after the model is ready. |
|
400 |
ModelArts.3516 |
Failed to deploy services because the version of the model that is used for deploying services is the same. |
Failed to deploy the service due to duplicate model versions. |
Correct the model version list to ensure that no duplicate model versions exist. |
|
400 |
ModelArts.3518 |
The {service_type} service has not been enabled or authorized. |
Service {type} has not been enabled or authorized. |
Enable or authorize the service. |
|
400 |
ModelArts.3519 |
Services only in one of states in [deploying, running, stopping, deleting] can be updated. |
Services in the deploying, running, stopping, or deleting state cannot be updated. |
Do not update services in the deploying, running, stopping, or deleting state. |
|
400 |
ModelArts.3520 |
A maximum of {number} {service_type} services are allowed. |
The total number of {type} services has reached the maximum allowed limit {quantity}. |
Delete the services that are no longer used or contact service O&M personnel to increase the quantity quota. |
|
400 |
ModelArts.3521 |
A maximum of {number} {service_type} services in running status are allowed. |
The total number of {type} services in the running state has reached the maximum allowed limit {quantity}. |
Delete the services that are no longer used or contact service O&M personnel to increase the quantity quota. |
|
400 |
ModelArts.3522 |
A maximum of {number} {service_type} service instances are allowed. |
The total number of {type} service instances has reached the maximum allowed limit {quantity}. |
Delete the service instances that are no longer used or contact service O&M personnel to increase the quantity quota. |
|
400 |
ModelArts.3523 |
Service {name} has been subscribed. |
Service {name} has been subscribed. |
Directly use the subscribed service. |
|
400 |
ModelArts.3524 |
Failed to subscribe to the service because {reason}. |
Failed to subscribe to the service because {Reason}. |
Locate the fault based on the failure cause. |
|
400 |
ModelArts.3525 |
Forbidden to update service {name} because it is a shared service. |
Failed to update service {name} because it is a shared service. |
Do not update a shared service. |
|
400 |
ModelArts.3527 |
Forbidden to subscribe to service {id} because it is a {service_type} service. |
Failed to subscribe to service {ID} because it is a {type} service. |
The service of this type cannot be subscribed to. |
|
400 |
ModelArts.3528 |
Forbidden to subscribe to service {id} because it is released by yourself. |
Failed to subscribe to service {ID} because it is your service. |
You cannot subscribe to services published by yourself. |
|
400 |
ModelArts.3529 |
Model {id} under service {id} does not exist. |
Model {ID} of service {ID} does not exist. |
Ensure that the model ID is correctly set and that the model belongs to the target service. |
|
400 |
ModelArts.3531 |
Service {id} has created the QR code. |
A QR code has been created for service {ID}. |
The QR code has been created for the service and does not need to be created again. |
|
400 |
ModelArts.3532 |
No QR code found for service {id}. |
A QR code has not been created for service {ID}. |
Create a QR code for the service and try again. |
|
400 |
ModelArts.3533 |
The selected edge node does not support {GPU/NPU}. |
The selected edge node flavor does not support {GPU/NPU}. |
Add the target hardware support to the selected edge node, or use another edge node that supports the target hardware. |
|
400 |
ModelArts.3534 |
The security group must contain at least one inbound rule to allow the TCP request from source address 0.0.0.0/0 and port 8080. |
The security group must contain at least one inbound rule to permit the requests whose protocol is TCP, source address is 0.0.0.0/0, and port number is 8080. |
Add the inbound rule to the security group. |
|
400 |
ModelArts.3535 |
Subservice {name} of service {name} does not exist. |
Subservice {name} of service {name} does not exist. |
Ensure that the subservice name is correctly set and that the subservice belongs to the target service. |
|
400 |
ModelArts.3536 |
Subservice {name} of service {name} has been subscribed. |
You have subscribed to subservice {name} of service {name}. |
Directly use the subscribed subservice. |
|
400 |
ModelArts.3538 |
The requirement notification of service {name} should not exceed one. |
At most one requirement notification is allowed for service {name}. |
Check the configuration and ensure that no more than one requirement notification is configured for service {name}. |
|
400 |
ModelArts.3540 |
Operation failed because you are not the owner of service {name}. |
You are not the owner of service {name}. |
This operation can be performed only by the service owner. |
|
400 |
ModelArts.3541 |
Error code {error_code} of service {name} does not exist. |
Error code {error code} of service {name} does not exist. |
Ensure that the error code is correctly set and that the error code belongs to the target service. |
|
400 |
ModelArts.3542 |
Error code {error_code} of service {name} already exists. |
Error code {error code} of service {name} already exists. |
Change the error code and try again. |
|
400 |
ModelArts.3544 |
URL domain CNAME resolution failed. |
Failed to parse the CNAME domain. |
Check whether the URL is correct. |
|
400 |
ModelArts.3545 |
Invalid certificate or private key. |
Invalid certificate or private key. |
Check whether the certificate or private key is correctly configured. |
|
400 |
ModelArts.3547 |
Cluster {id} does not exist. |
Cluster {ID} does not exist. |
Check whether the cluster ID is correct. |
|
400 |
ModelArts.3548 |
Path {path} is not a valid regex. |
Path {path} is not a valid regular expression. |
Check whether the path is correct. |
|
400 |
ModelArts.3549 |
Error code {code} is duplicated. |
Duplicate error code {error code} in the request body. |
Modify the error code to ensure that the error code is unique. |
|
400 |
ModelArts.3550 |
Domain {name} has been used. |
Domain {noun} has been used. |
Change the domain name and try again. |
|
400 |
ModelArts.3551 |
OBS path {path} does not exist. |
OBS path {path} does not exist. |
Check whether the OBS path is correct. |
|
400 |
ModelArts.3552 |
The length of [resource_id] must be in the range of [0, 64]. |
The resource_id value is not in the range from 0 to 64. |
Check whether RESOURCE_SPEC_CODE is too long. |
|
400 |
ModelArts.3553 |
Service {name} not subscribed yet. |
Service {name} has not been subscribed to. |
Subscribe to the service and try again. |
|
400 |
ModelArts.3554 |
Cluster name {name} has been used. |
Cluster name {name} has been used. |
Change the cluster name and try again. |
|
400 |
ModelArts.3556 |
Forbidden to share ai-service {id} because ai-service is unsharable. |
AI service {ID} cannot be shared. |
AI services cannot be shared. |
|
400 |
ModelArts.3559 |
Source error code {error_code} of service {name} already exists. |
Source error code {error code} of service {name} already exists. |
Change the source error code and try again. |
|
400 |
ModelArts.3560 |
Project {project_id} has not subscribed to subservice {id}. |
Subservice {ID} has not been subscribed for project {ID}. |
Subscribe to the subservice and try again. |
|
400 |
ModelArts.3561 |
Insufficient node quota. |
Insufficient node quota. |
Contact service O&M personnel to increase the quota or delete unnecessary nodes to release resources. |
|
400 |
ModelArts.3562 |
The value of field {due_time} must be a future time. |
The due_time value must be later than the current time. |
Set the due_time parameter to a time later than the current time. |
|
400 |
ModelArts.3564 |
The sample collection task has been created for service {id}. |
Sample collection for service {ID} has been created. |
Do not create the task again. |
|
400 |
ModelArts.3565 |
No sample collection task is created for service {id}. |
Sample collection for service {ID} has not been created. |
Create a service sample collection task and try again. |
|
400 |
ModelArts.3566 |
Forbidden to modify the default workspace. |
The default workspace cannot be modified. |
Do not modify the default workspace. |
|
400 |
ModelArts.3567 |
OBS error occurs because {reason}. |
OBS error because {cause}. |
Locate the fault based on the failure cause. |
|
400 |
ModelArts.3568 |
OBS client error occurs. |
The OBS client is abnormal. |
Contact service O&M personnel. |
|
400 |
ModelArts.3572 |
Invalid OBS URL {url}. |
Invalid OBS path {path}. |
Check whether the OBS path is correct. |
|
400 |
ModelArts.3573 |
Failed to obtain the bucket name from OBS URL {url}. |
Failed to obtain the bucket name from OBS path {path}. |
Check whether the OBS path is correct. |
|
400 |
ModelArts.3574 |
Failed to validate the correctness of OBS URL {url}. |
Failed to check OBS path {path}. |
Check whether the OBS path is correct. |
|
400 |
ModelArts.3576 |
Failed to query the model quota. |
Failed to obtain the model quota. |
Contact service O&M personnel. |
|
400 |
ModelArts.3577 |
Failed to update the model quota. |
Failed to update the model quota. |
Contact service O&M personnel. |
|
400 |
ModelArts.3578 |
Insufficient model quota. Increase the quota or delete any unnecessary services. |
Insufficient model quota. |
Increase the quota or delete the models that are no longer used, and try again. |
|
400 |
ModelArts.3580 |
Model not purchased. |
The model has not been purchased. |
Purchase the model and try again. |
|
400 |
ModelArts.3582 |
Failed to create edge configurations. |
Failed to create edge configurations. |
Contact service O&M personnel. |
|
400 |
ModelArts.3583 |
Failed to create the edge application due to IEF error. |
Failed to create the edge application due to an IEF platform error. |
Contact service O&M personnel. |
|
400 |
ModelArts.3584 |
Failed to update the edge application. |
Failed to update the edge application. |
Contact service O&M personnel. |
|
400 |
ModelArts.3585 |
The host port has been used by another edge application. |
The host port has been used by another edge application. |
Use another port or contact service O&M personnel. |
|
400 |
ModelArts.3586 |
Failed to create the edge application. |
Failed to create the edge application. |
Contact service O&M personnel. |
|
400 |
ModelArts.3587 |
Failed to delete the edge application. |
Failed to delete the edge application. |
Contact service O&M personnel. |
|
400 |
ModelArts.3588 |
Failed to create edge volumes and environments. |
Failed to create edge volumes and environments. |
Contact service O&M personnel. |
|
400 |
ModelArts.3589 |
Model {id} cannot be used to deploy {service_type} service. |
Model {ID} cannot be used to deploy the {type} service. |
Select another deployment type. |
|
400 |
ModelArts.3590 |
Invalid expression rule. Create a rule using Spring Expression Language and the desired result type is Boolean. |
Invalid expression rule. |
Ensure that the rule complies with the Spring expression language syntax, and the expected result is of Boolean type. |
|
400 |
ModelArts.3591 |
There are duplicate rules in the extend-configs. |
Duplicate rules in extend-configs. |
Modify the expression specifications to prevent duplicate expressions. |
|
400 |
ModelArts.3592 |
Incorrect model health configuration. |
Incorrect model health check parameters. |
Check whether the health check parameters of the model are correct. |
|
400 |
ModelArts.3593 |
The model has been expired. |
The model has expired. |
Purchase or subscribe to the model again. |
|
400 |
ModelArts.3594 |
Failed to query IEF instances. |
Failed to obtain the edge instance. |
Contact service O&M personnel. |
|
400 |
ModelArts.3595 |
Failed to create the IEF application mesh. |
Failed to create the application mesh. |
Contact service O&M personnel. |
|
400 |
ModelArts.3596 |
Failed to update the IEF application mesh. |
Failed to update the application mesh. |
Contact service O&M personnel. |
|
400 |
ModelArts.3597 |
Please authorize the development environment to use and store your AK and SK. |
Failed to use the service because the development environment has not been authorized to store and use your AK and SK. |
Authorize the development environment to store and use your AK and SK. |
|
400 |
ModelArts.3598 |
Only nodes in the [Running] state can be selected. |
Only running nodes can be selected. |
Select a running node and try again. |
|
400 |
ModelArts.3610 |
Parameter {name} cannot be empty. |
Parameter {name} cannot be left blank. |
Set the parameter and try again. |
|
400 |
ModelArts.3611 |
Failed to query the batch task run log. |
Failed to obtain batch processing task logs. |
Contact service O&M personnel. |
|
400 |
ModelArts.3612 |
Failed to {create/update} the service payload due to error code {code}. Please try later or submit a service ticket for professional technical support. |
Failed to {create/update} service workload. The error code is {error code}. Try again later or submit a service ticket. |
Try again or contact service O&M personnel. |
|
400 |
ModelArts.3613 |
Failed to register the API. Please try later or submit a service ticket for professional technical support. |
Failed to register the service API. Try again later or submit a service ticket. |
Try again or contact service O&M personnel. |
|
400 |
ModelArts.3620 |
Failed to get the number of associated services. |
Failed to obtain the number of associated services. |
Contact service O&M personnel. |
|
400 |
ModelArts.3811 |
Failed to query the agency because {reason}. |
Failed to obtain the agency because {Reason}. |
Locate the fault based on the failure cause. |
|
400 |
ModelArts.3812 |
Failed to create AI resource specification code {code} because {reason}. |
Failed to create resource flavor code {code} because {Reason}. |
Locate the fault based on the failure cause. |
|
400 |
ModelArts.3813 |
Failed to update AI resource specification code {code} because {reason}. |
Failed to update resource flavor code {code} because {Reason}. |
Locate the fault based on the failure cause. |
|
400 |
ModelArts.3814 |
Failed to delete AI resource specification code {code} because {reason}. |
Failed to delete resource flavor code {code} because {Reason}. |
Locate the fault based on the failure cause. |
|
400 |
ModelArts.3815 |
Failed to delete AI subservice {id} because {reason}. |
Failed to delete subservice {ID} because {Reason}. |
Locate the fault based on the failure cause. |
|
400 |
ModelArts.3816 |
Failed to create the AI proxy mapping because {reason}. |
Failed to create the proxy mapping because {reason}. |
Locate the fault based on the failure cause. |
|
400 |
ModelArts.3817 |
Failed to update the AI proxy mapping because {reason}. |
Failed to update the proxy mapping path because {reason}. |
Locate the fault based on the failure cause. |
|
400 |
ModelArts.3818 |
The agency of service {name} has been defined. |
The agency of service {name} has been configured. |
Do not repeat the operation. |
|
400 |
ModelArts.3822 |
The batch service task does not exist. |
The batch service does not exist. |
Enter the correct batch service ID. |
|
400 |
ModelArts.3825 |
Failed to generate the SDR data because {reason}. |
Failed to generate CDR data because {Reason}. |
Locate the fault based on the failure cause. |
|
400 |
ModelArts.3826 |
Failed to create the API because {reason}. |
Failed to create the API because {Reason}. |
Locate the fault based on the failure cause. |
|
400 |
ModelArts.3827 |
Failed to subscribe to the API because {reason}. |
Failed to subscribe to the API because {Reason}. |
Locate the fault based on the failure cause. |
|
400 |
ModelArts.3828 |
Failed to unsubscribe from the API because {reason}. |
Failed to unsubscribe from the API because {Reason}. |
Locate the fault based on the failure cause. |
|
400 |
ModelArts.3829 |
Failed to modify the API subscription status because {reason}. |
Failed to update the API subscription because {Reason}. |
Locate the fault based on the failure cause. |
|
400 |
ModelArts.3830 |
Operation not allowed. Change the charging mode from postpaid to prepaid in CBC. |
You are not allowed to change the billing mode from postpaid to prepaid. |
Change the billing mode in CBC. |
|
400 |
ModelArts.3831 |
Operation not allowed. Change the charging mode from prepaid to postpaid in CBC. |
You are not allowed to change the billing mode from prepaid to postpaid. |
Change the billing mode in CBC. |
|
400 |
ModelArts.3832 |
The subscription configuration is not modified and does not need to be updated. Please check. |
Failed to perform the operation because the subscription configuration has not modified. |
Change the subscription configuration and try again. |
|
400 |
ModelArts.3833 |
Failed to delete the API because {reason}. |
Failed to delete the API because {Reason}. |
Locate the fault based on the failure cause. |
|
400 |
ModelArts.3834 |
Failed to update metedata in CBC because {reason}. |
Failed to update the CBC metadata because {Reason}. |
Locate the fault based on the failure cause. |
|
400 |
ModelArts.3835 |
Resource specification code {code} of service {name} does not exist. |
Resource flavor code {code} of service {name} does not exist. |
Ensure that the resource flavor code is correctly set and that the code belongs to the target service. |
|
400 |
ModelArts.3836 |
Resource specification code {code} of project {id} does not exist. |
Resource flavor code {code} of project {1} does not exist. |
Ensure that the resource flavor code is correctly set and that the code belongs to the target project. |
|
400 |
ModelArts.3837 |
Resource ID {id} of project {id} does not exist. |
Resource {ID} of project {1} does not exist. |
Ensure that the resource ID is correctly set and that the resource belongs to the target project. |
|
400 |
ModelArts.3838 |
The hard-select has not been enabled for service {id}. |
Hard example filtering of service {0} has not been enabled. |
Enable hard example filtering for the service and try again. |
|
400 |
ModelArts.3839 |
The hard-select has been enabled for service {id}. |
Hard example filtering of service {0} has been enabled. |
You do not need to enable it again. |
|
400 |
ModelArts.3840 |
Only one algorithm can be set for the service model. |
Service {0} has more than one labeling type. |
Modify the configuration to ensure that there is only one labeling type. |
|
400 |
ModelArts.3841 |
The value of [dataset_type] must be one of values in [image_classification, object_detection]. |
The labeling type is not object detection or image classification. |
Change the labeling type to object detection or image classification. |
|
400 |
ModelArts.3842 |
The labeling type of service algorithm {name} does not match that of label task {type}. |
The labeling type of service algorithm {0} does not match that of label task {1}. |
Modify the labeling type or contact service O&M personnel. |
|
400 |
ModelArts.3843 |
Failed to query the information about dataset {id}. |
Failed to obtain database {0}. |
Contact service O&M personnel. |
|
400 |
ModelArts.3844 |
Failed to import samples to dataset {id}. |
Failed to import the sample to dataset {0}. |
Contact service O&M personnel. |
|
400 |
ModelArts.3845 |
No sample is available for import under the OBS path {path} of service {id}. |
No sample is available to be imported to OBS path {path} of service {ID}. |
Try again or contact service O&M personnel. |
|
400 |
ModelArts.3846 |
Failed to add the OBS bucket lifecycle rule for service {id}. |
Failed to add the lifecycle rule for the OBS bucket of service {ID}. |
Contact service O&M personnel. |
|
400 |
ModelArts.3847 |
Failed to delete the OBS bucket lifecycle rule for service {id}. |
Failed to delete the lifecycle rule for the OBS bucket of service {ID}. |
Contact service O&M personnel. |
|
400 |
ModelArts.3848 |
Service {id} in the information of dataset {import_type} already exists. |
The service {ID} of the {import type} dataset already exists. |
Check the request and select the correct service ID. |
|
400 |
ModelArts.3849 |
Service {id} in the information of dataset {import_type} does not exist. |
The service {ID} of the {import type} dataset does not exist. |
Check whether the service ID is correct. |
|
400 |
ModelArts.3850 |
The hard-sample-select task {id} of service {id} does not exist. |
Hard example task {ID} of service {ID} does not exist. |
Ensure that the hard example task ID is correctly set and that the task belongs to the target service. |
|
400 |
ModelArts.3851 |
The status of hard-sample-select task {name} cannot be changed from {status} to {status}. |
The status {status value} of the hard example task {name} cannot be updated to {status value}. |
Try again or contact service O&M personnel. |
|
400 |
ModelArts.3852 |
Failed to start hard-sample-select task {id} because related OBS files have been deleted. |
Failed to start hard example task {ID} because key OBS files have been deleted. |
Try again or contact service O&M personnel. |
|
400 |
ModelArts.3853 |
The hard-sample-select quota of project {id} does not exist. |
The quota for selecting hard samples for project {ID} does not exist. |
Create the quota and try again. |
|
400 |
ModelArts.3854 |
The hard-sample-select quota of project {id} already exists. |
The quota for selecting hard samples for project {ID} already exists. |
You do not need to create it again. |
|
400 |
ModelArts.3856 |
A maximum of {number} free services are allowed. |
The number of free services has reached the maximum allowed limit {Number}. |
Delete unnecessary free services to release resources. |
|
400 |
ModelArts.3857 |
A maximum of {number} free service instances are allowed. |
The number of free services has reached the maximum allowed limit {Number}. |
Delete unnecessary free services to release resources. |
|
400 |
ModelArts.3862 |
Subservice {id} has been added to whitelist URL {url}. |
The URL {URL} has been added to the whitelist of the sub-service {ID}. |
Do not repeat the operation. |
|
400 |
ModelArts.3863 |
Whitelist URL {id} of service {name} does not exist. |
The whitelist URL {ID} of the service {name} does not exist. |
Ensure that the URL ID in the whitelist is correct and that the URL belongs to the corresponding service. |
|
400 |
ModelArts.3864 |
Subservice {id} of service {name} does not exist. |
The sub-service {ID} of service {name} does not exist. |
Ensure that the sub-service ID is correct and that the sub-service belongs to the corresponding service. |
|
400 |
ModelArts.3865 |
The size of the download whitelist of service {name} exceeds the maximum number {number} allowed. |
The number of the whitelist records downloaded by service {name} exceeds the upper limit {value}. |
Contact service O&M personnel. |
|
400 |
ModelArts.3866 |
Domain ID {id} and user ID {id} already exist. |
The domain ID {ID} and user ID {ID} already exist. |
Do not repeat the operation. |
|
400 |
ModelArts.3867 |
Domain ID {id} does not exist. |
The domain ID {ID} does not exist. |
Check the request and enter the correct domain ID. |
|
400 |
ModelArts.3868 |
Domain ID {id} and user ID {id} do not exist. |
The domain ID {ID} and user ID {ID} do not exist. |
Check the request and enter the correct domain ID and user ID. |
|
400 |
ModelArts.3869 |
Failed to delete the task type because {reason}. |
Failed to delete the task type. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
400 |
ModelArts.3870 |
Failed to subscribe to the API because {reason}. |
Failed to subscribe to the API. Fault cause: {fault cause}. |
Contact service O&M personnel. |
|
400 |
ModelArts.3871 |
Forbidden to subscribe to postpaid QPS for the task type. |
You are not allowed to subscribe to postpaid QPS for the task type. |
Check the request parameter or contact service O&M personnel. |
|
400 |
ModelArts.3872 |
Forbidden to change the charging mode for the task type from prepaid to postpaid QPS. |
You are not allowed to change the billing mode of the task type from prepaid mode to postpaid QPS mode. |
Check the request parameter or contact service O&M personnel. |
|
400 |
ModelArts.3873 |
No corresponding subservice is found in cluster {name}. |
The cluster {0} does not have the corresponding sub-service. |
Check the request parameter or contact service O&M personnel. |
|
400 |
ModelArts.3880 |
Failed to create the AS policy because {reason}. |
Failed to create the AS policy. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
400 |
ModelArts.3890 |
The total number of AS policies exceeds the maximum number {number} allowed. |
The number of AS policies exceeds the upper limit {0}. |
Delete unnecessary AS policies. |
|
400 |
ModelArts.3892 |
Calling failed due to invalid CBS request. |
Failed to call the API due to the invalid CBC request. |
Try again or contact service O&M personnel. |
|
400 |
ModelArts.3894 |
The specification configuration information of runtime environment {name} does not exist. |
The specification configurations of the running environment {0} does not exist. |
Set the flavor configurations for the running environment and try again. |
|
400 |
ModelArts.3895 |
The specification configuration information of runtime environment {name} already exists. |
The specification configurations of the running environment {0} already exist. |
Do not repeat the operation. |
|
400 |
ModelArts.3896 |
Resource specification code {0} for user {1} already exists. |
The records of the resource specification code {0} in project {1} already exist. |
Do not repeat the operation. |
|
400 |
ModelArts.3897 |
Failed to {create/obtain/remove} the AS policy due to error code {code}. |
Failed to request {create/obtain/delete} the AS. Error code: {0}. |
Try again or contact service O&M personnel. |
|
400 |
ModelArts.3950 |
Failed to obtain the AI service list. |
Failed to obtain the AI service list. |
Contact service O&M personnel. |
|
400 |
ModelArts.3951 |
Failed to parse file {name}. |
Failed to parse the file {name}. |
Ensure that the file name is correct. |
|
400 |
ModelArts.3952 |
Insufficient resources. Please try later. |
Insufficient resources. |
Try again later or contact service O&M personnel. |
|
400 |
ModelArts.3953 |
Failed to delete online service {id} because it has been associated with AI service {name}. Please disassociate it and try again. |
Failed to delete real-time service {ID} because it has been associated with AI service {name}. |
Cancel the association between the real-time service and all AI services and try again. |
|
400 |
ModelArts.3954 |
AI resource specification {id} does not exist. |
The cloud resource specification {ID} does not exist. |
Ensure that the cloud resource specification ID is correct. |
|
400 |
ModelArts.3955 |
Field [resource_id_components] of AI resource specification {id} cannot be empty. |
The ID components in the cloud resource specification {ID} cannot be left blank. |
Set the resource_id_components parameter and try again. |
|
400 |
ModelArts.3976 |
No resources are available for the selected specification. |
No resources are available for the selected specification. |
Increase the number of nodes in the resource pool or purchase a resource pool of the required specifications. |
|
400 |
ModelArts.4105 |
Incorrect JSON format of the input data. |
The JSON format of the request body is incorrect. |
Use a request body in correct JSON format. |
|
400 |
ModelArts.4106 |
Invalid authorization request. Your account is restricted. |
Your account has been suspended. |
Ensure your account balance is sufficient. |
|
400 |
ModelArts.4111 |
Invalid Region header. |
Invalid Region header. |
Ensure the region header is correct. |
|
400 |
ModelArts.4122 |
Incorrect username or password. |
The username or password is incorrect. |
Check the username and password. |
|
400 |
ModelArts.4126 |
Account locked. |
The account has been locked. |
Wait until the account is unlocked and try again. |
|
400 |
ModelArts.4128 |
Week password is forbidden. |
Do not use a weak password. |
Configure a secure password. |
|
400 |
ModelArts.4129 |
System error. |
An error occurred. The taskEntity of a recovery task cannot be null. |
Check taskEntity and ensure it is not null. |
|
400 |
ModelArts.4200 |
Invalid request. |
The values of the request parameters are invalid. |
Check whether the request parameters are correct. |
|
400 |
ModelArts.4201 |
Invalid request URL because no service ID or request URI included. |
The request URL does not contain a service ID. |
Use a correct request URL. |
|
400 |
ModelArts.4202 |
Empty request. |
The request is empty. |
Ensure the request body is not empty. |
|
400 |
ModelArts.4203 |
Invalid request because requested service %s is unavailable. |
The requested service has not been started. |
Ensure the service is started. |
|
400 |
ModelArts.4204 |
Request API error. %s |
You do not have the API OBT permission. |
Obtain the API OBT permission. |
|
400 |
ModelArts.4205 |
A subdirectory must be specified as the dataset input or output path. |
A subdirectory must be specified as the dataset input or output path. |
A subdirectory must be specified as the dataset input or output path. |
|
400 |
ModelArts.4301 |
The labeling job does not exist. |
The labeling job does not exist, and the task has been stopped. |
Check the labeling job. |
|
400 |
ModelArts.4311 |
OBS bucket does not exist |
The OBS bucket does not exist. |
Ensure that the bucket name is correct and that the bucket name exists in OBS. |
|
400 |
ModelArts.4312 |
OBS path does not exist |
Incorrect or invalid bucket name. |
Ensure that the bucket name is correct and that the bucket name exists in OBS. |
|
400 |
ModelArts.4313 |
OBS path is invalid |
Invalid characters in the OBS path. |
Ensure that the OBS path consists of valid characters, including digits, letters, hyphens (-), underscores (_), slashes (/), and Chinese characters. |
|
400 |
ModelArts.4314 |
Obs error |
OBS access error. |
Ensure that you have the permission to access OBS and that the OBS path is valid. |
|
400 |
ModelArts.4315 |
Invalid OBS path. |
The OBS path is invalid. |
Ensure the data URL does not contain //. |
|
400 |
ModelArts.4316 |
OBS buckets are not supported. |
OBS buckets are not supported. |
Select a PFS bucket for the parallel file system. |
|
400 |
ModelArts.4337 |
OperationCenter error. |
An error occurred in OperationCenter, leading to a failure to send alarms to IES. |
Check the alarms. |
|
400 |
ModelArts.4338 |
The resource not exists |
The dataset ID or labeling task ID does not exist. |
Ensure that the input dataset ID or labeling task ID is correct. |
|
400 |
ModelArts.4340 |
Import path does not contain valid file |
No valid file exists in the import path. |
Ensure that the file in the OBS path is valid. |
|
400 |
ModelArts.4342 |
Dataset publish with splitting annotated samples error |
Incorrect splitting for labeled samples. |
Ensure that the labeled samples and labels meet splitting criteria. |
|
400 |
ModelArts.4343 |
Dataset is publishing, the operation is forbidden |
Do not switch, import, synchronize, or publish a dataset version because there is an ongoing publish task. |
Perform the operations after the ongoing publish task is complete. |
|
400 |
ModelArts.4344 |
Dataset is being deleted, annotation is forbidden |
No labeling task is allowed because the dataset is being deleted. |
Ensure that the dataset ID is correct. |
|
400 |
ModelArts.4345 |
File not found |
The HDFS file does not exist. |
Ensure that the OBS path is correct and that the file is available in the OBS path. |
|
400 |
ModelArts.4346 |
Failed to obtain clusters. |
Obtaining MRS clusters failed. |
Check the MRS clusters. |
|
400 |
ModelArts.4347 |
List files failed |
Failed to obtain HDFS files. |
Ensure that the OBS path is correct and that the files are available in the OBS path. |
|
400 |
ModelArts.4349 |
Dataset is switching version, the operation is forbidden |
Do not switch, import, synchronize, or publish a dataset version because there is an ongoing version switching task. |
Perform the operations after the ongoing version switching task is complete. |
|
400 |
ModelArts.4350 |
The work_path is too long, please select shorter folder |
The value of work_path exceeded the limit. |
Change the value of work_path to a valid one. |
|
400 |
ModelArts.4351 |
Dataset already exists |
A dataset whose name is the value of dataset_name already exists. |
Change the value of dataset_name. |
|
400 |
ModelArts.4352 |
Dataset does not exist |
The dataset ID does not exist. |
Ensure that the imported dataset ID is correct. |
|
400 |
ModelArts.4353 |
Dataset version does not exist |
The dataset version ID does not exist. |
Check dataset version parameters. |
|
400 |
ModelArts.4355 |
Sync data source task exist |
A data synchronization task is being executed for the dataset. |
Perform the operations after the ongoing data synchronization task is complete. |
|
400 |
ModelArts.4356 |
Dataset already has running import task |
A data import task is being executed for the dataset. |
Perform the operations after the ongoing data import task is complete. |
|
400 |
ModelArts.4357 |
Parse AI annotation result file name error |
Failed to parse the labeling file name. |
Ensure that the file name in the OBS auto labeling result path is correct. |
|
400 |
ModelArts.4358 |
Invalid export path |
Invalid OBS export path. |
Ensure that the export path is correct. |
|
400 |
ModelArts.4359 |
Export task does not exist |
The export task ID does not exist. |
Ensure that the export task ID is correct. |
|
400 |
ModelArts.4361 |
Import AI annotation error |
Failed to synchronize the auto labeling task result. |
Ensure that the auto labeling task result is correct. |
|
400 |
ModelArts.4362 |
Import data error |
Failed to import data. |
Ensure that the authentication information and the request parameters for creating an import task are correct. |
|
400 |
ModelArts.4364 |
Dataset workPath subdir already exists |
The work_path subdirectory already exists in the dataset directory. |
Ensure that the subdirectory in the dataset directory is correct. |
|
400 |
ModelArts.4365 |
Dataset labels not set |
The label set of the dataset is empty. |
Create labels for the dataset. |
|
400 |
ModelArts.4368 |
Parse pc bin file error |
Failed to parse the point cloud binary file. |
Ensure that the point cloud binary file is not damaged. |
|
400 |
ModelArts.4369 |
Parse pc prelabel json file error |
Failed to parse the point cloud pre-labeling file. |
Ensure that the point cloud pre-labeling file is correct. |
|
400 |
ModelArts.4370 |
One dataset version can be released in a minute, please try again later |
Frequent dataset version creation. |
Do not frequently create dataset versions. |
|
400 |
ModelArts.4371 |
Dataset version already exists |
The value of version_name is the same as an existing version. |
Change the value of version_name. |
|
400 |
ModelArts.4372 |
Valid image not found |
No point cloud data image found. |
Ensure that the point cloud data image is correct. |
|
400 |
ModelArts.4374 |
Invalid path |
Invalid OBS path. |
Ensure that the OBS path is correct and that the file is available in the OBS path. |
|
400 |
ModelArts.4375 |
Parse pc obs image error |
Failed to parse the point cloud data image in OBS. |
Ensure that the point cloud data image is correct. |
|
400 |
ModelArts.4376 |
Unsupported pc pcd format error |
The PCD attribute is not supported. |
Check the point cloud data in PCD format. |
|
400 |
ModelArts.4377 |
Pc pcd format error |
Failed to parse the point cloud data in PCD format. |
Ensure that the PCD file is valid. |
|
400 |
ModelArts.4378 |
Parse pc pcd file error |
Failed to parse the point cloud data in PCD format. |
Ensure that the PCD file is correct. |
|
400 |
ModelArts.4379 |
Unsupported pc file format error |
The point cloud data format is not supported. |
Ensure that the imported point cloud data is in BIN or PCD format. |
|
400 |
ModelArts.4380 |
Parse kitti calibration file error |
Failed to parse the Kitti data. |
Ensure that the data is correct. |
|
400 |
ModelArts.4381 |
Dataset is publishing, annotation is forbidden |
Sample labeling is not allowed because a publish task is being executed in the dataset. |
Wait until the publish task is complete. |
|
400 |
ModelArts.4382 |
Generate 2d image error |
Failed to generate a 2D image. |
Ensure that the point cloud data is correct. |
|
400 |
ModelArts.4384 |
Invalid export parameter |
Invalid parameter. |
Ensure that all mandatory parameters are included and valid. |
|
400 |
ModelArts.4391 |
Task name is invalid |
An auto deploy task whose name is the task_name value already exists in the dataset. |
Ensure that the task name is correct. |
|
400 |
ModelArts.4392 |
Task failed |
Failed to create or run the dataset. |
Ensure that the parameters and task resources are correct. |
|
400 |
ModelArts.4393 |
Task stopped |
The dataset task has been stopped. |
Check the status of the dataset task with the specified ID. |
|
400 |
ModelArts.4396 |
Parameter is invalid |
Invalid parameter. |
Ensure that the import task parameters are correct. |
|
400 |
ModelArts.4398 |
Invalid system language. |
The system language is invalid. |
Check whether the system language is supported. |
|
400 |
ModelArts.4399 |
Type match error |
The dataset type does not match the algorithm model. |
Ensure that the algorithm model is correct. |
|
400 |
ModelArts.4400 |
Can not get table schema |
Failed to obtain the schema information from the OBS directory. |
Ensure that the CSV file in the OBS directory is correct. |
|
400 |
ModelArts.4401 |
Failed to export data. |
Exporting data failed. The dataset file cannot be copied to the repository. |
Take other measures to export data. |
|
400 |
ModelArts.4404 |
Can not get table schema from DLI |
Failed to obtain the schema information from DLI. |
Ensure that the request parameters are correct. |
|
400 |
ModelArts.4405 |
Dataset must contains labels to start automation labeling |
Labeled samples must be available for enabling auto labeling. |
Add new labeled samples to the dataset. |
|
400 |
ModelArts.4406 |
Dataset must contains labels with at least five images to start automation labeling |
The number of samples to be labeled for each label cannot be less than 5. |
Ensure that each label has at least five samples. |
|
400 |
ModelArts.4407 |
Dataset must contains unlabeled files |
The dataset must contain samples that have not been labeled. |
Ensure that there are unlabeled samples in the dataset. |
|
400 |
ModelArts.4408 |
Dataset contains labels shape not bndbox |
The label shape cannot be bounding box. |
Ensure that the shape attribute is correct. |
|
400 |
ModelArts.4409 |
Running tasks has exceed the max threshold |
The number of tasks that are being executed in the dataset has reached the maximum allowed limit. |
Try again later. |
|
400 |
ModelArts.4410 |
Label not found |
The label does not exist. |
Ensure that the label name is correct. |
|
400 |
ModelArts.4411 |
Label already exists |
The new label list contains existing label names. |
Ensure that the label names are correct. |
|
400 |
ModelArts.4412 |
Label shortcut already exists |
The label shortcut already exists. |
Change the label shortcut. |
|
400 |
ModelArts.4413 |
Label is incompatible with annotation rules |
The label attribute does not comply with specifications. |
Ensure that the label attribute complies with specifications. |
|
400 |
ModelArts.4414 |
Triplet label's from_entity or to_entity does not exist |
The entity label does not exist in the triplet label. |
Ensure that the entity label in the triplet label is available. |
|
400 |
ModelArts.4415 |
Entity label can not be deleted because it is used by triplet label |
Failed to delete the entity label because it is being used in the triplet label. |
Wait until the label is not used in the triplet label and try again. |
|
400 |
ModelArts.4416 |
Sync tags error |
Failed to synchronize labels in the team labeling task. |
Ensure that the synchronization task parameters are correct. |
|
400 |
ModelArts.4417 |
Update sample labels failed when upload sample and labels |
Failed to update the sample labels. |
Ensure that the labels are correct. |
|
400 |
ModelArts.4418 |
Label property mask_gray_value already exists |
Duplicate tag mask_gray_value. |
Ensure that the tag mask_gray_value is correct. |
|
400 |
ModelArts.4420 |
Sample not found |
The sample with the specified ID does not exist. |
Ensure that the sample ID is correct. |
|
400 |
ModelArts.4421 |
Upload sample failed |
Failed to upload the sample to the dataset. |
Ensure that the uploaded sample type and data are correct. |
|
400 |
ModelArts.4422 |
Sample already exists |
The sample that is being imported already exists. |
Enter that the imported sample is correct. |
|
400 |
ModelArts.4423 |
Get sample size failed, please input size manually |
Incorrect size of the image obtained from the object detection dataset. |
Manually set the image size. |
|
400 |
ModelArts.4425 |
Label property mask_gray_value is incompatible with defined value |
The mask_gray_value value cannot be changed. |
Ensure that the mask_gray_value value is not changed. |
|
400 |
ModelArts.4426 |
Dataset must contains tags to start auto deploy |
The label set of the dataset cannot be empty. |
Create labels for the dataset. |
|
400 |
ModelArts.4427 |
Dataset must contains tags with at least five images to start auto deploy |
The number of samples to be labeled for each label cannot be less than 5. |
Ensure that each label has at least five samples. |
|
400 |
ModelArts.4428 |
The label attribute name already exists. |
The label attribute name already exists. |
Configure another attribute name. |
|
400 |
ModelArts.4429 |
The label attribute value already exists. |
The label attribute value already exists. |
Configure another attribute value. |
|
400 |
ModelArts.4430 |
The label attribute or value does not exist. |
The label attribute or value does not exist. |
Check the label attribute and value. |
|
400 |
ModelArts.4502 |
The IAM agency name already exists, please delete the agency in IAM first and retry |
The default IAM agency already exists. |
Delete the IAM agency and create a new one. |
|
400 |
ModelArts.4503 |
Failed to create the DLI agency. |
Creating the DLI agency failed. |
Check the DLI agency. |
|
400 |
ModelArts.4506 |
The sub-service was not found. |
The sub-service does not exist. |
Check whether the sub-service to be accessed is available. |
|
400 |
ModelArts.4507 |
The specification code was not found. |
The flavor code does not exist. |
Internal error. Contact technical support. |
|
400 |
ModelArts.4550 |
Workspace clearing error. |
An error occurred in clearing the workspace. |
Handle carbon reader exceptions. |
|
400 |
ModelArts.4551 |
You are not allowed to delete workspace resources. |
You do not have permission to delete workspace resources. |
Check your permissions. |
|
400 |
ModelArts.4552 |
ModelArts workspace error. |
An error occurred in the ModelArts workspace. |
Check identity authentication in the workspace. |
|
400 |
ModelArts.4601 |
The workforce does not exist |
The team ID does not exist. |
Ensure that the team ID is correct. |
|
400 |
ModelArts.4602 |
The workforce already exists |
A team whose name is the workforce_name value already exists. |
Ensure that the workforce_name value is correct. |
|
400 |
ModelArts.4603 |
Update workforce state failed |
Failed to delete the team. |
Check whether the team has been deleted. |
|
400 |
ModelArts.4604 |
The worker does not exist |
The team member specified by work_id does not exist. |
Ensure that the workforce_id and work_id values are correct. |
|
400 |
ModelArts.4605 |
The worker already exists |
The team member whose value is the email value already exists. |
Ensure that the email value is correct. |
|
400 |
ModelArts.4607 |
Failed to reset the password. |
Requesting to reset the password failed. |
The username is incorrect, or the password reset email cannot be sent to the account. |
|
400 |
ModelArts.4609 |
Change password failed |
Failed to change the account password. |
Ensure that the new password complies with specifications. |
|
400 |
ModelArts.4612 |
Task not found |
The task ID does not exist. |
Ensure that the task ID is correct. |
|
400 |
ModelArts.4615 |
Workforce task is unfinished |
The version cannot be switched because the team labeling task has not been completed. |
Wait until the team labeling task is complete and try again. |
|
400 |
ModelArts.4616 |
Too many unfinished tasks. |
There are too many unfinished tasks. |
Finish tasks. |
|
400 |
ModelArts.4617 |
The number of manager should be one |
The team manager already exists. |
Ensure that the roles of the team members are correct. |
|
400 |
ModelArts.4618 |
Can not delete yourself |
You cannot delete yourself from the team. |
Ensure that the request parameters are correct. |
|
400 |
ModelArts.4619 |
Workforce task does not exist |
No team labeling task whose ID is the workforce_task_id value is allowed. |
Ensure that the workforce_task_id value is correct. |
|
400 |
ModelArts.4620 |
The workforce task already exists |
A team labeling task whose name is the task_name value already exists. |
Ensure that the task_name value is correct. |
|
400 |
ModelArts.4621 |
Failed to start the team labeling task. |
The team labeling task cannot be started. |
Check the task. |
|
400 |
ModelArts.4622 |
Invalid n_clusters, should less than the total number of samples |
The number of groups has reached the maximum allowed limit. |
Check whether the number of groups is less than the total number of samples. |
|
400 |
ModelArts.4623 |
Workforce task is checking |
Only one review task is allowed at a time. |
Wait until all existing review tasks are complete and try again. |
|
400 |
ModelArts.4624 |
The member task is not checked. |
The member task is not checked. |
Check the task. |
|
400 |
ModelArts.4625 |
There are no unchecked samples. |
There are no unchecked samples. |
Obtain unchecked samples. |
|
400 |
ModelArts.4627 |
Request notify too frequently |
Frequent notification request submission. |
Try again later. |
|
400 |
ModelArts.4628 |
Can not delete worker who has task |
The team member cannot be deleted because the labeling task has not been completed. |
Notify the member to complete the task. |
|
400 |
ModelArts.4631 |
The task does not exist. |
The task does not exist. |
Check the task. |
|
400 |
ModelArts.4633 |
The IAM user has been associated. |
The IAM user has been associated. |
Ensure the IAM user has not been associated. |
|
400 |
ModelArts.4634 |
Failed to frequently reset the password. |
Frequently resetting the password failed. |
Request to reset the password up to once within 300s. |
|
400 |
ModelArts.4635 |
The IAM account has been associated. |
The IAM account has been associated. |
Ensure the IAM account has not been associated. |
|
400 |
ModelArts.4636 |
The task does not exist. |
The task does not exist. |
Ensure the task is available. |
|
400 |
ModelArts.4637 |
Deleting the default labeling task is forbidden. |
Do not delete the default labeling task of a dataset. |
When you create a dataset of the old version, the system automatically creates a labeling task for the dataset. If you delete the default labeling task, the dataset may become unavailable. To delete the task, delete the dataset. |
|
400 |
ModelArts.4650 |
Interactive operations not found |
Incorrect interactive_operations value. |
Ensure that the interactive_operations value is correct. |
|
400 |
ModelArts.4651 |
Get obs sample error |
Failed to read the sample from OBS. |
Ensure that the sample in OBS is correct. |
|
400 |
ModelArts.4654 |
Inference execution error. |
An error occurred during inference execution. |
Check inference logs. |
|
400 |
ModelArts.4656 |
Sample oversized. |
The sample is oversized. |
Ensure the size of a sample is not larger than 12,582,912 bytes. |
|
400 |
ModelArts.4700 |
Task does not exist |
The task ID does not exist. |
Ensure that the task ID is correct. |
|
400 |
ModelArts.4701 |
Can not start data analysis task, dataset version annotation type must be 'Image Classification' or 'Object Detection' |
The dataset type does not support feature analysis. |
Ensure that the dataset type is correct. |
|
400 |
ModelArts.4702 |
Can not start data analysis task, dataset version must be 'Default' format |
The dataset format does not support feature analysis. |
Use the default dataset format. |
|
400 |
ModelArts.4703 |
Can not start data analysis task, dataset version must contains annotated samples |
Feature analysis cannot be performed because there is no labeled sample in the dataset. |
Ensure that there are labeled samples in the dataset. |
|
400 |
ModelArts.4704 |
Currently unable to start data analysis task, Please try again later |
Feature analysis cannot be performed because a dataset version is being published. |
Try again later. |
|
400 |
ModelArts.4705 |
Oversized file to be downloaded. |
The OBS file is oversized. |
Use an image whose size is less than 12 MB. |
|
400 |
ModelArts.4706 |
Can not start data analysis task, dataset version status must be normal |
Feature analysis cannot be performed because the dataset version is not in normal state. |
Ensure that the current dataset version is in normal state. |
|
400 |
ModelArts.4707 |
Failed to obtain file %s from OBS %s. |
Obtaining the temporary OBS download URL failed. |
Ensure the OBS URL is correct. |
|
400 |
ModelArts.4709 |
Data preprocessing task already exists |
A training task whose name is the name value already exists. |
Ensure that the name value is correct in the request for creating in the task. |
|
400 |
ModelArts.4710 |
Dataset export file error |
Failed to publish or export the dataset. |
Ensure that the task export or publish parameters are correct. |
|
400 |
ModelArts.4711 |
Publishing requires splitting but annotated samples do not satisfied for splitting rules |
Failed to publish because the dataset label samples do not meet splitting requirements. |
Ensure that the number of dataset labels and the number of labeled samples meet the splitting requirements. |
|
400 |
ModelArts.4712 |
Dataset publish version failed |
Failed to publish the dataset version. |
Ensure that the task export or publish parameters are correct. |
|
400 |
ModelArts.4714 |
The number of dataset versions has reached the quota limit. |
The number of dataset versions has reached the quota limit. |
Ensure the number of dataset versions does not exceed the quota limit. |
|
400 |
ModelArts.4715 |
Incorrect data analysis result. |
The data analysis result is incorrect. |
Check the result of data analysis for handling OBS errors. |
|
400 |
ModelArts.4716 |
Abnormal AI Gallery. |
AI Gallery is not running properly. Calling the AI Gallery API getVersionDetail failed. |
Rectify the fault. |
|
400 |
ModelArts.4717 |
Failed to execute the fulfillment task by AI Gallery. |
AI Gallery failed to execute the fulfillment task. |
Obtain details about the fulfillment task. |
|
400 |
ModelArts.4760 |
Failed to encrypt data. |
Encrypting data failed. |
Check the input. |
|
400 |
ModelArts.4800 |
The label task already exists |
A labeling task whose name is the task_name value already exists. |
Ensure that the task_name value is correct. |
|
400 |
ModelArts.4801 |
The label task not exists |
The labeling task specified by the ID does not exist. |
Ensure that the imported task ID is correct. |
|
400 |
ModelArts.4820 |
Unsupported operation, label task type is %s |
The labeling task type does not support the operation. |
Ensure that the labeling task type is correct. |
|
400 |
ModelArts.4822 |
The number of labelers must exceed 1 |
At least two annotators are available in the team. |
Check the number of annotators in the team. |
|
400 |
ModelArts.4823 |
Import to dataset version error |
No data can be imported to a table dataset version. |
Ensure that the dataset type is correct. |
|
400 |
ModelArts.4824 |
Dataset version status must be normal |
Abnormal dataset version state. |
Check the version publish state of the dataset. |
|
400 |
ModelArts.4825 |
Dataset version is empty |
No sample is available in the dataset version. |
Check the version publish result of the dataset. |
|
400 |
ModelArts.4827 |
Dataset version delete failed |
Failed to delete the dataset version because there is a labeling task based on the dataset version. |
Check whether there is any labeling task that is created using the dataset version. |
|
400 |
ModelArts.4828 |
Failed to delete the version. |
The version in the current state cannot be deleted. |
Change the version state. |
|
400 |
ModelArts.4851 |
Task version not found |
The version specified by version_id does not exist. |
Ensure that the version_id value is correct. |
|
400 |
ModelArts.4852 |
Error in downloading task version logs. |
An error occurred in downloading task version logs. |
Check the training log URL. |
|
400 |
ModelArts.4853 |
Insufficient quota for data feature tasks. |
The quota for data feature tasks is insufficient. |
Delete unnecessary tasks. |
|
400 |
ModelArts.4854 |
Insufficient quota for data feature versions. |
The quota for data feature versions is insufficient. |
Delete unnecessary versions. |
|
400 |
ModelArts.4860 |
Insufficient quota for real-time services. |
The quota for real-time services is insufficient. |
Check the remaining quota for real-time services. |
|
400 |
ModelArts.4861 |
Insufficient quota for batch services. |
The quota for batch services is insufficient. |
Check the remaining quota for batch services. |
|
400 |
ModelArts.4870 |
HBase error. |
An error occurred in HBase. |
Rectify the fault in batch deletion. |
|
400 |
ModelArts.4902 |
Access prohibited because the app-auth API was not associated with APIG app %s. |
The target app is not authorized. |
Ensure AppCode is allowed to access the target service. |
|
400 |
ModelArts.4903 |
Access prohibited because the app-auth API was not associated with a signature key. |
The app authentication API is not associated with a signature key. |
Internal error. Contact technical support. |
|
400 |
ModelArts.4904 |
Access prohibited because the app-auth API was not associated with signature key %s. |
The app authentication API is not associated with the signature key. |
Internal error. Contact technical support. |
|
400 |
ModelArts.4905 |
Failed to check the authorization request header. |
Checking the authorization request header failed. |
Use the correct AppCode URL or contact technical support. |
|
400 |
ModelArts.4907 |
Failed to submit the training job. |
Submitting the training job failed. |
Check whether the algorithm is available. |
|
400 |
ModelArts.4909 |
Failed to execute the training job. |
Executing the training job failed. |
Check training logs to identify the failure cause. |
|
400 |
ModelArts.4911 |
Failed to create the model import task. |
Creating the model import task failed because the task ID is left blank. |
Specify the task ID. |
|
400 |
ModelArts.4913 |
Failed to execute the model import task. |
Executing the model import task failed due to task timeout. |
Identify the failure cause of task timeout. |
|
400 |
ModelArts.4915 |
Failed to create the auto labeling task. |
Creating the auto labeling task failed. |
Identify the failure cause of task creation. |
|
400 |
ModelArts.4917 |
Failed to execute the auto labeling task. |
Executing the auto labeling task failed due to task timeout. |
Identify the failure cause of task timeout. |
|
400 |
ModelArts.4921 |
Failed to execute the import task. |
Executing the import task failed. |
Identify the failure cause. |
|
400 |
ModelArts.4927 |
Failed to submit hard example collection. |
Submitting hard example collection failed because the task ID is left blank. |
Specify the task ID. |
|
400 |
ModelArts.4929 |
Failed to collect hard examples. |
Collecting hard examples failed due to task timeout. |
Identify the failure cause of task timeout. |
|
400 |
ModelArts.4934 |
Invalid model. |
The model is invalid. |
Use a valid model. |
|
400 |
ModelArts.4935 |
Failed to create the medical task. |
Creating the medical task failed. |
Identify the failure cause of task creation. |
|
400 |
ModelArts.4951 |
Failed to create the auto inference task. |
Creating the auto inference task failed. |
Identify the failure cause of task creation. |
|
400 |
ModelArts.4953 |
Failed to execute the auto inference task. |
Executing the auto inference task failed due to task timeout. |
Identify the failure cause of task timeout. |
|
400 |
ModelArts.4963 |
Failed to execute the auto grouping task. |
Executing the auto grouping task failed due to task timeout. |
Identify the failure cause of task timeout. |
|
400 |
ModelArts.4991 |
Failed to obtain the job status. |
The specifications have exceeded the quota for free specifications. |
Switch to billed specifications or wait until resources are released. |
|
400 |
ModelArts.4992 |
Resources sold out. |
The resources have been sold out. |
Use available resources. |
|
400 |
ModelArts.4999 |
System error. |
An error occurred in the system. |
Wait until the UI adapts to the new mechanism. |
|
400 |
ModelArts.5011 |
Invalid parameter |
Invalid parameter. |
Modify the parameter. |
|
400 |
ModelArts.5012 |
Invalid product attribute |
Invalid product attribute. |
Modify the product attribute. |
|
400 |
ModelArts.5016 |
The original model ({0}) does not exist during model release |
The product source model does not exist. |
Select another source model. |
|
400 |
ModelArts.5022 |
Unsupported model type |
The model type is not supported. |
Select another source model. |
|
400 |
ModelArts.5025 |
Incorrect verification code |
Incorrect verification code. |
Enter the correct verification code. |
|
400 |
ModelArts.5026 |
Verification code expired |
Verification code expired. |
Obtain a new verification code. |
|
400 |
ModelArts.5027 |
The verification code does not match the email address. |
The email address and verification code do not match. |
Obtain a new verification code. |
|
400 |
ModelArts.5038 |
You must first get a verification code |
You have not obtained the verification code. |
Specify your email address and obtain the verification code by email. |
|
400 |
ModelArts.5041 |
Duplicate version. Refresh the page and try again |
Duplicate version. |
Refresh the page and try again. |
|
400 |
ModelArts.5042 |
The order has been paid. |
The order has been paid. |
The order has been paid. Do not pay again. |
|
400 |
ModelArts.5047 |
Hilens product name duplicated. |
Duplicate HiLens name. |
Enter another product name. |
|
400 |
ModelArts.5048 |
Hilens skill version duplicated. |
Duplicate HiLens version. |
Select another version. |
|
400 |
ModelArts.5049 |
Incorrect Hilens skill. Select the skill corresponding to the offering. |
Incorrect HiLens skill. |
Select the correct HiLens skill. |
|
400 |
ModelArts.5051 |
The HiLens skill type is not supported. Release the skill type in HiLens Studio. |
The HiLens skill is currently unavailable. Publish the skill in HiLens Studio. |
Select the correct HiLens skill. |
|
400 |
ModelArts.5052 |
The user does not have the agency permission |
You do not have the agency permission. |
Set an agency and try again. |
|
400 |
ModelArts.5061 |
The size of the image is too large. |
The size of the image is too large. |
Please upload an image smaller than 7 MB. |
|
400 |
ModelArts.5062 |
The number of the images uploaded today has reached the limit. |
The number of the images uploaded today has reached the limit. |
Please upload the image the next day. |
|
400 |
ModelArts.5063 |
Illegal image or image name. |
Illegal image or image name. |
Please Upload a correct image file. |
|
400 |
ModelArts.5064 |
Maximum upload size exceeded of HTTP request. |
Maximum upload size exceeded of HTTP request. |
Please reduce the file size and upload it again. |
|
400 |
ModelArts.5070 |
The activity is in progress. |
The activity is in progress. |
Activity is in progress, can't delete. |
|
400 |
ModelArts.5071 |
The activity is not start. |
The activity is not start. |
Activity that have not started cannot be registered. |
|
400 |
ModelArts.5072 |
The activity has end. |
The activity has end. |
Activity that have ended cannot be registered. |
|
400 |
ModelArts.5073 |
The activity has registed. |
The activity has registed. |
The activity has already been registered. Do not register again. |
|
400 |
ModelArts.5075 |
The license is already expired. |
The license is already expired. |
Please purchase quotas again. |
|
400 |
ModelArts.5076 |
The license remaining is insufficient. |
The license remaining is insufficient. |
Please purchase quotas in time. |
|
400 |
ModelArts.5077 |
The consumption is expired or expire soon. |
The consumption is expired or expire soon. |
Please purchase quotas in time. |
|
400 |
ModelArts.5303 |
The obs source data is empty |
Empty source data. |
Select other source data. |
|
400 |
ModelArts.5304 |
The maximum number of files has been exceeded |
The number of files has reached the maximum allowed limit. |
Select other source data or reduce the data volume. |
|
400 |
ModelArts.5305 |
The maximum size of files has been exceeded |
The file size has reached the maximum allowed limit. |
Select other source data or reduce the data volume. |
|
400 |
ModelArts.5306 |
The maximum depth of files has been exceeded |
The file depth has reached the maximum allowed limit. |
Select other source data or reduce the data depth. |
|
400 |
ModelArts.5309 |
Only allow edge service published to AIHub. |
Only edge VAS can be published. |
Select the edge VAS. |
|
400 |
ModelArts.5312 |
Only allow market category service published to AIHub. |
Only market VAS can be published. |
Select the market VAS. |
|
400 |
ModelArts.5313 |
Only allow released service published to AIHub. |
Only published VAS is allowed. |
Select the published VAS. |
|
400 |
ModelArts.5314 |
Only allow 'closed Beta Test' stage service published to AIHub. |
Only Closed Beta Test VAS can be published. |
Select the Closed Beta Test VAS. |
|
400 |
ModelArts.5315 |
Request is repeated submit. |
This request is repeated submit. |
Do not submit the request again. |
|
400 |
ModelArts.6301 |
The instance already exists. |
The instance already exists. |
Enter another instance name. |
|
400 |
ModelArts.6302 |
The instance count already reaches the maximum value. |
The maximum number of instances has been reached. |
Delete unnecessary instances. |
|
400 |
ModelArts.6303 |
The field does not support sorting. |
This field does not support sorting. |
Delete the field from the sorting parameters. |
|
400 |
ModelArts.6304 |
Please stop the instance before deleting. |
Failed to delete the instance in the running state. |
Refresh the page. Stop the instance and then delete it. |
|
400 |
ModelArts.6305 |
The instance is already running. |
The instance is in the running state. |
Do not start it again. |
|
400 |
ModelArts.6306 |
The instance is starting. |
Other operations cannot be performed because the instance is being started. |
Perform other operations later. |
|
400 |
ModelArts.6307 |
The instance has already been stopped. |
The instance has been stopped. |
Refresh the page and view the instance state. |
|
400 |
ModelArts.6308 |
The instance is stopping. |
The instance is being stopped. |
Refresh the page and view the instance state. |
|
400 |
ModelArts.6309 |
The instance does not exist. |
The instance does not exist. |
Ensure that the instance has been deleted. |
|
400 |
ModelArts.6316 |
The param 'storage' is needed for creating notebook instance. |
Incorrect parameters during instance creation. |
Add the storage parameter. |
|
400 |
ModelArts.6317 |
The 'path' parameter is required when the storage type is OBS. |
Incorrect parameters during instance creation. |
Add the path parameter. |
|
400 |
ModelArts.6318 |
The param 'path' needs to end with /. |
Incorrect parameters during instance creation. |
Ensure that the value of the path parameter ends with a slash (/). |
|
400 |
ModelArts.6319 |
There is no ak/sk in the global settings. Please add it by access ModelArts console. |
The AK/SK have not been configured in the global settings of ModelArts. |
Configure the AK/SK in the global settings of ModelArts. |
|
400 |
ModelArts.6320 |
Access obs error. Reason is {}. |
OBS access error. |
Ensure that the OBS path is correct. |
|
400 |
ModelArts.6323 |
The flavor is not supported, please check it. |
The flavor is not supported. |
Ensure that the flavor is correctly configured. |
|
400 |
ModelArts.6324 |
This location type is not supported. Please check it. |
The storage type is not supported. |
Ensure that the storage type is correctly configured. |
|
400 |
ModelArts.6326 |
The instance is frozen. Check whether your account is in arrears in Billing Center. |
The instance has been frozen. |
Check the account balance and top up the account. |
|
400 |
ModelArts.6327 |
The instance is not in running. Please refresh the page and start it. |
The instance is not in the running state. |
Refresh the page and try again. |
|
400 |
ModelArts.6328 |
Sorry, you currently do not have permission for this flavor. Please apply it firstly. |
You do not have permission to use the flavor. |
Contact technical support. |
|
400 |
ModelArts.6329 |
Sorry, this flavor specification is sold out. Please try others. |
The flavor is sold out. |
Use another flavor or try again later. |
|
400 |
ModelArts.6330 |
The flavor type of profile does not match the type of flavor. Please check it. |
The types are not matched. |
Ensure that the flavor type matches the profile type. |
|
400 |
ModelArts.6331 |
The evs volume size ranges from {} GB to {} GB. |
The EVS disk size exceeds the upper limit. |
Check the EVS disk size. |
|
400 |
ModelArts.6332 |
Incorrect parameter type. The '{}' parameter must be of the '{}' type. |
Parameter type error. |
Ensure that the parameter type meets the requirements. |
|
400 |
ModelArts.6333 |
The notebook is being restored. Refresh the page and wait for several minutes. The fault may be caused by instance overload. |
Notebook instance fault. |
The instance is recovering. Try again later. |
|
400 |
ModelArts.6334 |
Invalid value for name or description. The character `{}` is not allowed. |
The description parameter is incorrect. |
Enter a valid description value. |
|
400 |
ModelArts.6335 |
'{}' is a required property. |
Parameter missing. |
Ensure that the corresponding parameter is available. |
|
400 |
ModelArts.6336 |
'{}' property value is incorrect. |
Incorrect parameter value. |
Ensure that the corresponding parameter is correct. |
|
400 |
ModelArts.6341 |
The repository does not exist or has been deleted. |
The Git repository does not exist or has been deleted. |
Check the corresponding parameter. |
|
400 |
ModelArts.6343 |
The repository name already exists. |
The Git repository already exists. |
Check the corresponding parameter. |
|
400 |
ModelArts.6344 |
Delete failed. Please delete the associated development environment instance first. |
Failed to delete the repository. |
Delete the corresponding notebook instance first. |
|
400 |
ModelArts.6345 |
Currently the OBS type instance does not support git capability. |
The Git repository cannot be used for OBS instances. |
Use notebook instances of the EVS type. |
|
400 |
ModelArts.6346 |
The timestamp of auto stop must be later than the current timestamp. |
This parameter cannot be modified. |
Check the corresponding parameter and ensure that the automatic end time is later than the current time. |
|
400 |
ModelArts.6347 |
When the instance is in the '{}' status, the '{}' parameter cannot be modified. |
Failed to modify the parameter. |
Check the corresponding parameter. |
|
400 |
ModelArts.6348 |
The 'duration' parameter is mandatory for enabling auto stop. |
The description parameter is missing. |
Configure the duration parameter. |
|
400 |
ModelArts.6349 |
The 'duration' parameter is incorrect. The value ranges from {} to {}. |
The value of duration parameter exceeds the threshold. |
Configure the duration parameter. |
|
400 |
ModelArts.6350 |
Failed to access OBS because of incorrect AK/SK or insufficient permissions. |
Access to OBS is rejected. |
Ensure that the AK/SK is correct and you have the permission to access OBS. |
|
400 |
ModelArts.6353 |
Failed to verify the AK/SK. Please check and try again. |
Incorrect AK/SK. |
Ensure that the AK/SK in the global settings of ModelArts is correct. |
|
400 |
ModelArts.6354 |
The AK/SK do not belong to the user. Please check and enter the correct ones. |
Incorrect AK/SK. |
Ensure that the AK/SK in the global settings of ModelArts is correct. |
|
400 |
ModelArts.6355 |
The resource is initializing. Please wait one minute and try again. |
Resources in the dedicated resource pool are being initialized. |
Try again later. |
|
400 |
ModelArts.6357 |
The operation is not allowed because another operation is being performed on the instance or the instance is in the target state. |
The operation is not allowed. |
Try again later. |
|
400 |
ModelArts.6358 |
The path parameter is incorrect. It cannot be the root directory of an OBS bucket, but must be a specific directory in the OBS bucket. |
The OBS path parameter is incorrect. |
Ensure that the path parameter is correct. |
|
400 |
ModelArts.6360 |
Failed to start the notebook due to insufficient background resources. Try again later. |
Failed to start the notebook due to insufficient background resources. Try again later. |
Try again later or contact technical support. |
|
400 |
ModelArts.6361 |
ModelArts internal service or configuration error. Submit a service ticket to get professional technical support. |
Internal error. |
System error. Contact technical support. |
|
400 |
ModelArts.6371 |
Currently, notebooks support only OBS buckets whose Storage Class is Standard. Change the OBS bucket and try again. |
Notebook instances support only standard OBS buckets. |
Use standard OBS buckets. |
|
400 |
ModelArts.6374 |
The credential can be added only when type is set to AK/SK or agency. |
The authentication type can only be AK/SK or agency. |
Ensure that the authentication type is AK/SK or agency. |
|
400 |
ModelArts.6376 |
Please make sure agency exists. |
The IAM agency does not exist. |
Ensure that the agency exists on IAM. |
|
400 |
ModelArts.6377 |
The user id cannot be left blank. |
The user ID cannot be left blank. |
Ensure that the user ID parameter is available. |
|
400 |
ModelArts.6378 |
The agency name cannot be left blank. |
The agency name cannot be left blank. |
Ensure that the agency name parameter is available. |
|
400 |
ModelArts.6379 |
No IAM agency created in Settings. Create an IAM agency on the ModelArts management console. |
No agency is created in the global settings. |
Create an agency in the global settings. |
|
400 |
ModelArts.6400 |
Invalid request payload {0}, please check. |
Invalid request payload {0}, please check. |
Check the request body. |
|
400 |
ModelArts.6528 |
No EVS available. Please try again later. |
The EVS disk has been sold out. |
Try again later or contact technical support. |
|
400 |
ModelArts.6600 |
Check whether the parameter is valid. |
Failed to verify the parameters. |
Ensure that the parameter is valid. |
|
400 |
ModelArts.6651 |
Unsupport entity. |
Unsupported project objects. |
Ensure that the project object is supported. |
|
400 |
ModelArts.6652 |
Please delete resources from the project first. |
Failed to delete the project resources. |
Delete the datasets and notebook instances under the project and ensure that all training jobs have been completed. |
|
400 |
ModelArts.6690 |
The image size cannot exceed 8 MB. |
The image size exceeds 8 MB. |
Ensure that the image size does not exceed 8 MB. |
|
400 |
ModelArts.6716 |
The specified flavor {0} is already sold out. |
The specified flavor {0} is already sold out. |
Select another flavor or contact technical support. |
|
400 |
ModelArts.6737 |
Conflict tag {0} for image {1}, tag cannot be duplicated. |
Conflict tag {0} for image {1}, tag cannot be duplicated. |
Enter a proper image tag. |
|
400 |
ModelArts.6763 |
Cannot manage the pool, The cluster version is earlier than v1.15. |
Cannot manage the pool, The cluster version is earlier than v1.15. |
Please upgrade the cluster version. |
|
400 |
ModelArts.6771 |
Cannot register the image since the size of the registered image {0}/{1}:{2} is {3} bytes, which has reached the maximum of {4} bytes. If the size of the image is too large, the image will fail to be decompressed. |
Cannot register the image since the size of the registered image {0}/{1}:{2} is {3} bytes, which has reached the maximum of {4} bytes. If the size of the image is too large, the image will fail to be decompressed. |
Check the image size. |
|
400 |
ModelArts.6782 |
Mounting OBS bucket or folder does not support in current authentication mode, add AK/SK in ModelArts global settings to enabled it. |
Mounting OBS bucket or folder does not support in current authentication mode, add AK/SK in ModelArts global settings to enabled it. |
Please add AK/SK to ModelArts Global Settings. |
|
400 |
ModelArts.6789 |
The current user does not have the permission to use the SSH key pair {0}, please update the key pair of the instance and try again. |
The current user does not have the permission to use the SSH key pair {0}, please update the key pair of the instance and try again. |
Update the key pair of the instance and restart the instance. |
|
400 |
ModelArts.6792 |
Instance {0} does not support to update flavor to {1}, please try another flavor. |
Instance {0} does not support to update flavor to {1}, please try another flavor. |
Select another flavor. |
|
400 |
ModelArts.6797 |
Specified image {0} cannot be found. |
Specified image {0} cannot be found. |
Check the image access permission. |
|
400 |
ModelArts.6870 |
Specified flavor {0} does not support current instance feature {1}. |
Specified flavor {0} does not support current instance feature {1}. |
Select a proper flavor. |
|
400 |
ModelArts.7002 |
Not gray user, please contact the administrator |
Workspace authentication error. |
Contact the administrator to check whether the user has permissions on the workspace. |
|
400 |
ModelArts.7003 |
no permission to get iam user list, please check permission |
IAM permissions are incorrect. |
Add the IAM permissions based on the error message. |
|
400 |
ModelArts.7004 |
the status of workspace: {workspaceID} is abnormal, can not execute [action: {action}] |
You are not allowed to create resources when a workspace is in the normal state, for example, a deleted or failed workspace. |
Create resources in a normal workspace. |
|
400 |
ModelArts.7005 |
workspace:{workspace} not existed |
The workspace does not exist. |
Ensure that the transferred workspace ID exists. |
|
400 |
ModelArts.7006 |
workspace number over limit, limit: {limit} |
The number of workspaces exceeds the upper limit. |
Delete unnecessary workspaces. |
|
401 |
ModelArts.0112 |
Failed to execute the policy. |
The user role is not allowed to execute the policy. |
Check user role permissions. |
|
401 |
ModelArts.0201 |
Token doesn't exist. |
The token is empty. |
Add a correct token in the request header. |
|
401 |
ModelArts.0202 |
Invalid token header because the token has expired. |
The token has expired. |
Use a valid token. |
|
401 |
ModelArts.0203 |
Invalid token. |
The token cannot be parsed. |
Use a valid token. |
|
401 |
ModelArts.0204 |
Failed to parse the token. |
Parsing the token failed. |
Use a valid token. |
|
401 |
ModelArts.0205 |
No authorization request header. |
The authorization request header is missing. |
Use the correct AppCode URL or contact technical support. |
|
401 |
ModelArts.0206 |
Incorrect authorization request header format. |
The authorization request header is in an incorrect format. |
Use the correct AppCode URL or contact technical support. |
|
401 |
ModelArts.0207 |
Token must contain project info of current region. |
Add project information to the token. |
Add project information to the token. |
|
401 |
ModelArts.0208 |
Failed to check the authorization request header. |
Checking the authorization request header failed. |
Use the correct AppCode URL or contact technical support. |
|
401 |
ModelArts.0209 |
No key appId in header. |
The appId request header is missing. |
Use the correct APIG URL. |
|
401 |
ModelArts.0210 |
No key apiId in header. |
The apiId request header is missing. |
Use the correct APIG URL. |
|
401 |
ModelArts.0212 |
Invalid token header because the token does not contain a project. |
The token does not contain any project information. |
Use a project-level token. |
|
401 |
ModelArts.0428 |
The user authorization does not exist. |
The user authorization does not exist. |
Check whether the user agency is authorized. |
|
401 |
ModelArts.3801 |
User credential (AK and SK) does not exist. |
The user certificate does not exist. |
Add the AK/SK again. |
|
401 |
ModelArts.4117 |
User is unverified. |
User is unverified. |
Please check the user has been authorized by IAM. |
|
401 |
ModelArts.4119 |
Invalid RBAC. |
The project ID in the token is left blank. |
Add the correct project ID in the token. |
|
401 |
ModelArts.4127 |
Token authentication expired. |
The token authentication has expired. |
Obtain the user token again. |
|
401 |
ModelArts.4201 |
Invalid token. |
The token is invalid. |
Check the token of the account to which the user belongs. |
|
401 |
ModelArts.4203 |
Invalid request because %s. |
You do not have the access permission. |
Ensure you have the access permission. |
|
401 |
ModelArts.4504 |
Iam error |
IAM error. |
Ensure that the AK/SK or token is correct. |
|
401 |
ModelArts.4505 |
The operation on the IAM user is not allowed. |
No operation is allowed on the IAM user list. |
Do not perform operations on the IAM user list. |
|
401 |
ModelArts.4506 |
Failed to check the IAM service ticket. |
Checking the IAM service ticket failed. |
Check the IAM service ticket. |
|
401 |
ModelArts.4626 |
Failed to update the team or team manager. |
Updating the team or team manager failed. |
Identify the failure cause. |
|
401 |
ModelArts.4629 |
Failed to delete the member. |
Deleting a member failed. |
Identify the failure cause. |
|
401 |
ModelArts.4630 |
No permission. |
The user does not have permission to perform the operation. |
Ensure the user has permission to perform the operation. |
|
401 |
ModelArts.4632 |
Unregistered member. |
The member has not been registered. |
Ensure the member is registered. |
|
401 |
ModelArts.4713 |
Forbidden operation. |
This operation is not allowed because there are uncompleted asynchronous tasks of dataset hashing. |
Ensure all asynchronous tasks of dataset hashing are complete. |
|
401 |
ModelArts.4750 |
Error in reading files from OBS. |
An error occurred in reading files from OBS. |
Identify the failure cause. |
|
401 |
ModelArts.4804 |
Failed to create a label task by the member. |
The team member failed to create a label task. |
Do not create a label task as a team member. |
|
401 |
ModelArts.4826 |
OBS KMS encryption buckets are not supported. |
OBS KMS encryption buckets are not supported. |
Do not use OBS KMS encryption buckets. |
|
401 |
ModelArts.4901 |
Failed to prepare a training job. |
Preparing a training job failed. |
Authorizing onObs failed. Check the IAM proxy or OBS. |
|
401 |
ModelArts.4961 |
Failed to submit an auto grouping job. |
Submitting an auto grouping job failed. |
Authorizing onObs failed. Check the IAM proxy or OBS. |
|
401 |
ModelArts.5001 |
Token is blank |
The token does not exist. |
Add the token and try again. |
|
401 |
ModelArts.5002 |
Token is invalid |
Invalid token. |
Obtain a token and try again. |
|
401 |
ModelArts.5056 |
You do not have the permission to access the requested resource. |
You have not subscribed to HiLens. |
Log in to the HiLens management console and subscribe to the service. |
|
401 |
ModelArts.5402 |
Enterprise certification is required first. |
Enterprise certification is required first. |
Please perform enterprise authentication first. |
|
401 |
ModelArts.6201 |
The user's account has been suspended. |
The user account is frozen. |
Check the account balance and top up the account. |
|
401 |
ModelArts.6203 |
The user's account has been restricted. |
The user account is restricted. |
Check the account balance and top up the account. |
|
401 |
ModelArts.6608 |
Please refresh user info. |
Failed to obtain the user information. |
Refresh the user information. |
|
401 |
ModelArts.6620 |
Please refresh the user token. |
Invalid user token. |
Refresh the user token. |
|
403 |
ModelArts.0108 |
You are not authorized to perform the ({0}) operation. |
You do not have permission to perform {0}. |
Check whether you are authorized to perform operations on OBS or APIs. |
|
403 |
ModelArts.0112 |
Policy doesn't allow {} {} to be performed. |
The permission on the workspace is restricted. |
Ensure that you have the permission on the workspace. |
|
403 |
ModelArts.0203 |
Invalid token. |
Invalid token. |
Obtain a new token and try again. |
|
403 |
ModelArts.0206 |
Invalid AK/SK. |
Invalid AK/SK. |
Check whether the token is valid. |
|
403 |
ModelArts.0210 |
The project id in the request URL does not match the token. |
The project ID in the request URL and the token do not match. |
Use the correct project ID to generate a token. |
|
403 |
ModelArts.2784 |
InvalidToken |
Invalid token. |
Check the request token. |
|
403 |
ModelArts.2785 |
AuthorizationNotFound |
You cannot use ModelArts because you have not authorized ModelArts. |
Please go to the Settings page to authorize ModelArts. |
|
403 |
ModelArts.2852 |
FederationOperationDeny |
Federation participant does not have permission to do this. |
Contact the federation owner to do this. |
|
403 |
ModelArts.3010 |
Failed to copy model, you don't have permission to copy the model ({0}). |
You do not have the permission to copy model {0}. |
Check whether the entered token or model ID is correct. |
|
403 |
ModelArts.3075 |
Model ({0}) is a subscription model and cannot create a new version. |
Failed to create a new version because model {0} has been subscribed. |
No new version can be created for a subscribed model. |
|
403 |
ModelArts.3555 |
Forbidden to access ECS. |
You do not have the permission to access the ECS. |
Authorize access to the ECS and try again. |
|
403 |
ModelArts.3936 |
The app-auth API {id} does not belong to service {id}. |
The API {ID} that supports application authentication does not belong to the service {ID}. |
Check the request parameter or contact service O&M personnel. |
|
403 |
ModelArts.4102 |
Token parsing error because role te_agency is not configured for the Ai-service admin token. |
The cloud service proxy token does not contain the te_agency role. |
Internal error. Contact technical support. |
|
403 |
ModelArts.4116 |
User has been owed, please check the account status and balance. |
User has been owed, please check the account status and balance. |
Please check account balance. |
|
403 |
ModelArts.4118 |
User has been suspended, please check the account balance. |
User has been suspended, please check the account balance. |
Please check the account balance. |
|
403 |
ModelArts.4310 |
OBS action is forbidden, please check iam agency or OBS and so on |
You do not have permission to access OBS. |
Grant the permission to access OBS. |
|
403 |
ModelArts.4335 |
Iam agency is invalid |
Invalid IAM agency. |
Check the IAM permission. |
|
403 |
ModelArts.4336 |
The user hasn't permission |
Restricted user permission. |
Check the user permission. |
|
403 |
ModelArts.4348 |
Check dli agency failed |
Failed to create the agency for checking DLI. |
Check the agency permission for checking DLI. |
|
403 |
ModelArts.4419 |
File is too large |
The size of the file imported from OBS or to be parsed has reached the maximum allowed limit. |
Ensure that the file is correct. |
|
403 |
ModelArts.4500 |
The number of iam agencies has reached the maximum |
The number of IAM agencies exceeded the upper limit. |
Delete unused IAM agencies. |
|
403 |
ModelArts.4501 |
The iam agency create action is forbidden |
Failed to create the IAM agency. |
Ensure that you have permission to create an IAM agency. |
|
403 |
ModelArts.4600 |
The worker action is forbidden |
The team member cannot perform the operation. |
Check whether the team member has permission to perform the operation. |
|
403 |
ModelArts.4613 |
Task not finish |
Failed to obtain the task result because the task execution has not been completed. |
Try again later. |
|
403 |
ModelArts.4803 |
Dataset has unfinished label tasks, the operation is forbidden |
Failed to delete data because the labeling task in the dataset has not been completed. |
Ensure that all labeling tasks in the dataset are complete. |
|
403 |
ModelArts.4821 |
Task is publishing, the operation is forbidden |
The auto labeling task cannot be started because a labeling task is being published. |
Try again after the labeling task is published. |
|
403 |
ModelArts.4850 |
Process task is initializing, the operation is forbidden |
Failed to delete the task because the processor task is being initialized. |
Check the task status. |
|
403 |
ModelArts.5013 |
The user is not registered. Please release a product first to complete the registration |
You have not registered with AI Gallery. |
Publish a product in AI Gallery for registration. |
|
403 |
ModelArts.5014 |
Permission deny |
You do not have permission to access the resource. |
Access other resources. |
|
403 |
ModelArts.5017 |
Account suspended. |
Suspended account. |
Ensure that the account is not restricted and try again. |
|
403 |
ModelArts.5040 |
Your usage has exceeded the maximum quota |
The resource usage has reached the maximum allowed limit. |
Wait until the system is idle and try again. |
|
403 |
ModelArts.5043 |
Challenge applications submit failed |
Failed to submit the contest. |
System error. Contact technical support. |
|
403 |
ModelArts.5045 |
Send verify code failed,please try again later. |
Send verify code failed. |
Please click to send the verification code again later. |
|
403 |
ModelArts.5053 |
Product has been recycled. |
The product has been reclaimed. |
Select another product. |
|
403 |
ModelArts.5054 |
At least one available version must exist. |
At least one available version is required for the product. |
Perform other operations. |
|
403 |
ModelArts.5055 |
The subscription has expired. |
The subscription has expired. |
Initiate a new subscription. |
|
403 |
ModelArts.5057 |
The free package is sold out. |
The free package has been sold out. |
Select another package. |
|
403 |
ModelArts.6653 |
Contact the project owner. |
You are not authorized to operate the project. |
Contact the project owner to obtain the authorization. |
|
404 |
ModelArts.2786 |
TokenProjectIDNotMatch |
The project ID (%s) in the request does not match that(%s) in the token. |
Change the request token or change the project ID in the request. |
|
404 |
ModelArts.2836 |
PathNotFound |
Path not found. |
Please confirm that the PATH is correct |
|
404 |
ModelArts.2881 |
ImageSaveJobNotExist |
ImageSaveJob is not exist |
Please check task_id |
|
404 |
ModelArts.2890 |
PoolNotFound |
Pool (%s) does not exist |
Please check whether the pool exists |
|
404 |
ModelArts.3001 |
Model ({0}) does not exist. |
Model {0} does not exist. |
Check whether the entered model ID is correct. |
|
404 |
ModelArts.3003 |
Failed to get model names list. |
Failed to obtain the model name list. |
Check whether the account is correct. |
|
404 |
ModelArts.3019 |
Infer format ({0}) does not exist. |
Input/Output mode {0} does not exist. |
Change the input/output mode. |
|
404 |
ModelArts.3021 |
Template ({0}) does not exists. |
Template {0} does not exist. |
Select another template. |
|
404 |
ModelArts.3071 |
The subscription ({0}) does not exist. |
Subscription {0} does not exist. |
Subscribe to the model and try again. |
|
404 |
ModelArts.3080 |
Model optimization job ({0}) does not exist. |
Model optimization task {0} does not exist. |
The task is unavailable. |
|
404 |
ModelArts.3502 |
Service {name} does not exist. |
The service {name} does not exist. |
Ensure that the service name is correct. |
|
404 |
ModelArts.3507 |
Model {name} does not exist. |
The model {ID} does not exist. |
Ensure that the model ID is correct. |
|
404 |
ModelArts.3923 |
Application {id} does not exist. |
The application {ID} does not exist. |
Ensure that the application ID is correct. |
|
404 |
ModelArts.3935 |
The app-auth API {id} does not exist. |
The API {ID} that supports application authentication does not exist. |
Ensure that the interface ID is correct. |
|
404 |
ModelArts.4204 |
API %s does not exist. |
The API does not exist. |
Use an available API. |
|
404 |
ModelArts.4901 |
The app-auth API does not exist. |
The app authentication API does not exist. |
Ensure the app URL is correct. |
|
404 |
ModelArts.5058 |
Object ({0}) does not exit. |
The object does not exist. |
Select another object. |
|
404 |
ModelArts.6623 |
Ensure that the dataset already exists. |
Failed to find the corresponding dataset. |
Ensure that the dataset already exists. |
|
404 |
ModelArts.6624 |
Ensure that the storage path already exists. |
Failed to find the corresponding storage path. |
Ensure that the storage path already exists. |
|
404 |
ModelArts.6650 |
Ensure that the project already exists. |
Failed to find the corresponding project. |
Ensure that the project already exists. |
|
405 |
ModelArts.2803 |
MethodNotAllowed |
Method not allowed. |
Please confirm that the HTTP Method is correct |
|
408 |
ModelArts.4205 |
Connection timed out. |
Accessing the backend server timed out. |
Try again later. |
|
408 |
ModelArts.6100 |
The request timed out. Please try again. |
Timeout. |
System error. Contact technical support. |
|
409 |
ModelArts.2796 |
NotAllowedToTerminate |
The job cannot be terminated. |
Check whether the job status is valid. |
|
409 |
ModelArts.2813 |
NotAllowedToRestart |
The job cannot be restarted. |
Check whether the action type is valid. |
|
409 |
ModelArts.2878 |
JobStatusChanged |
Job status changed |
Please try again later. |
|
409 |
ModelArts.3002 |
Model ({0}, {1}) already exists. |
Model ({0}, {1}) already exists. |
Change the model name or version and try again. |
|
409 |
ModelArts.3020 |
Infer format ({0}) already exists. |
Input/Output mode {0} already exists. |
Change the input/output mode. |
|
409 |
ModelArts.3022 |
Template ({0}) already exists. |
Template {0} already exists. |
Select another template. |
|
409 |
ModelArts.3073 |
model ({0}) already exists, no subscription required. |
Model {0} already exists. |
Do not subscribe to another model with the same name. |
|
409 |
ModelArts.3503 |
Service {name} already exists. |
The service {name} already exists. |
Change the service name and try again. |
|
409 |
ModelArts.3929 |
Failed to create the application because {reason}. |
Failed to create the application. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
409 |
ModelArts.5015 |
The product is being reviewed |
The product is being reviewed. |
Perform operations after the review is complete. |
|
409 |
ModelArts.5044 |
Operations conflict, please try again later |
Failed to perform the operation. |
Try again later. |
|
413 |
ModelArts.4104 |
Invalid request body because the size exceeds the maximum size allowed. |
The size of the request body is invalid. |
Use a request body smaller than 12 MB. |
|
417 |
ModelArts.6654 |
Project with the same name already exists. |
A project with the same name already exists. |
Use another project name. |
|
429 |
ModelArts.2799 |
TooManyRequests |
services too many requests |
Please try again later |
|
429 |
ModelArts.4206 |
Excessive number of requests to %s. |
The maximum number of requests has been reached. |
Try again later. |
|
429 |
ModelArts.4395 |
Too many dataset requests |
Frequent dataset or labeling task creation in a unit time. |
Try again later. |
|
429 |
ModelArts.6101 |
The system is busy now. Please try again later. |
The system is busy. |
The system is busy. Please try again. If the retry still fails, contact technical support. |
|
500 |
ModelArts.0010 |
Internal error. |
Internal error. |
Contact R&D and O&M personnel. |
|
500 |
ModelArts.0109 |
Unauthorized account. |
Unauthorized account. |
Only the administrator can call alarm APIs. |
|
500 |
ModelArts.2950 |
Unknown |
Unknown error. |
System error. Contact technical support. |
|
500 |
ModelArts.2951 |
DatasetService |
Dataset service error. |
System error. Contact technical support. |
|
500 |
ModelArts.2952 |
ExtServiceDB |
Database service error. |
System error. Contact technical support. |
|
500 |
ModelArts.2953 |
ExtServiceIAM |
IAM service error. |
System error. Contact technical support. |
|
500 |
ModelArts.2954 |
ExtServiceWorkspace |
Workspace service error. |
System error. Contact technical support. |
|
500 |
ModelArts.2955 |
ExtServiceAOM |
AOM service abnormal |
System error. Contact technical support. |
|
500 |
ModelArts.2956 |
ExtServiceAIG |
AIG service abnormal |
System error. Contact technical support. |
|
500 |
ModelArts.2957 |
ExtServiceSMN |
SMN service abnormal |
System error. Contact technical support. |
|
500 |
ModelArts.2958 |
ExtServiceOBS |
OBS service abnormal |
System error. Contact technical support. |
|
500 |
ModelArts.2959 |
ExtServiceMAOS |
MAOS service abnormal |
System error. Contact technical support. |
|
500 |
ModelArts.3006 |
Failed to publish model. |
Failed to publish the model. |
The model metadata failed to be stored to the database. Contact R&D and O&M personnel. |
|
500 |
ModelArts.3009 |
Failed to delete model, model ({0}) already deploy service. |
Failed to delete model {0} because it has been deployed as a service. |
Delete the deployed service and try again. |
|
500 |
ModelArts.3043 |
User ({0}) does not have obs: object: PutObjectAcl permission. |
User {0} does not have the obs:object:PutObjectAcl permission. |
Add the permission and try again. |
|
500 |
ModelArts.3044 |
Model file ({0}) is larger than 20G and cannot be imported. |
Failed to import model file {0}. |
Ensure that the file is at most 20 GB in size. |
|
500 |
ModelArts.3045 |
Parameter ({0}) is null. |
Parameter {0} is left blank. |
Check the parameter setting as prompted. |
|
500 |
ModelArts.3047 |
ExeML model({0}) cannot be converted. |
Failed to convert model {0}. |
ExeML models cannot be converted. |
|
500 |
ModelArts.3048 |
Model({0}) is being imported and cannot be converted. |
Failed to convert model {0} because the model status is abnormal. |
Convert the model after the model status changes to normal. |
|
500 |
ModelArts.3049 |
Cannot convert models belonging to other users. |
Models of other users cannot be converted. |
You can only convert your models. |
|
500 |
ModelArts.3050 |
Get user temporary credential failed. |
Failed to obtain the temporary user certificate. |
Check whether the token is valid. |
|
500 |
ModelArts.3052 |
Chip Type ({0}) not support. |
Chip type {0} is not supported. |
Check whether the chip is of Ascend, GPU, Arm, or general type. |
|
500 |
ModelArts.3053 |
Model Type ({0}) not support. |
Model type {0} is not supported. |
This type of model is not supported. |
|
500 |
ModelArts.3054 |
Task ({0}) does not exists. |
Task {0} does not exist. |
The task is unavailable. |
|
500 |
ModelArts.3055 |
Task ({0}) is running cannot be deleted. |
Failed to delete task {0} because it is running. |
Delete the task after it is complete. |
|
500 |
ModelArts.3056 |
Task name ({0}) not meeting the specification. |
Task name {0} does not comply with specifications. |
Ensure that a task name starts with a lowercase letter, ends with a lowercase letter or digit, and contains 2 to 24 characters, including lowercase letters, digits, and hyphens (-). |
|
500 |
ModelArts.3057 |
Task description ({0}) not meeting the specification. |
Task description {0} does not comply with specifications. |
Ensure that task description contains 1 to 100 characters and cannot contain the following characters: &,!"<>=. |
|
500 |
ModelArts.3058 |
Task input ({0}) not meeting the specification. |
Task input {0} does not comply with specifications. |
Perform operations according to the error message. |
|
500 |
ModelArts.3059 |
Task output ({0}) not meeting the specification. |
Task output {0} does not comply with specifications. |
Ensure that the task output is a valid HTTP or HTTPS address. |
|
500 |
ModelArts.3060 |
Task spec ({0}) not meeting the specification. |
Advanced task option {0} does not comply with specifications. |
Ensure that the advanced option does not contain Chinese characters or the following characters: (|)&$?<>. Ensure that the value is less than 4000. |
|
500 |
ModelArts.3061 |
get Task ({0}) log parameter not meeting the specification. |
Log parameters of task {0} do not comply with specifications. |
Ensure that the offset or lines value is greater than or equal to 0. |
|
500 |
ModelArts.3062 |
Task ({0}) exists. |
Task {0} already exists. |
Change the name and try again. |
|
500 |
ModelArts.3064 |
DL Framework Type ({0}) not support. |
Deep learning framework {0} is not supported. |
This type of framework is not supported. |
|
500 |
ModelArts.3065 |
The image of the model is being built so the runtime cannot be updated. |
Failed to update runtime because the model image is being created. |
Wait until the image is created. |
|
500 |
ModelArts.3301 |
Failed to build image. |
Failed to create the image. |
Check the image, or contact R&D and O&M personnel to rectify the fault. |
|
500 |
ModelArts.3501 |
Failed to deploy the service. |
Failed to deploy the service. |
Contact service O&M personnel. |
|
500 |
ModelArts.3504 |
Failed to delete the service. |
Failed to delete the service. |
Contact service O&M personnel. |
|
500 |
ModelArts.3505 |
Failed to update the service. |
Failed to query the service. |
Contact service O&M personnel. |
|
500 |
ModelArts.3506 |
Model {id} does not exist. |
Failed to update the service. |
Contact service O&M personnel. |
|
500 |
ModelArts.3508 |
Failed to query the service monitoring information. |
Failed to obtain the service monitoring information. |
Contact service O&M personnel. |
|
500 |
ModelArts.3509 |
Failed to query edge nodes. |
Failed to query the node. |
Contact service O&M personnel. |
|
500 |
ModelArts.3511 |
Failed to query edge tags. |
Failed to query the edge label. |
Contact service O&M personnel. |
|
500 |
ModelArts.3537 |
Failed to handle the CBC request. |
Failed to process the CBC request. |
Contact service O&M personnel. |
|
500 |
ModelArts.3539 |
Failed to initialize service URL {url}. |
Failed to initialize the service URL {URL}. |
Ensure that the service URL is correct. |
|
500 |
ModelArts.3543 |
Invalid CBC request. |
The CBC request is invalid. |
Try again or contact service O&M personnel. |
|
500 |
ModelArts.3546 |
Failed to create the cluster. |
Failed to create the dedicated resource pool. |
Contact service O&M personnel. |
|
500 |
ModelArts.3579 |
Failed to query the model information. |
Failed to query the model information. |
Contact service O&M personnel. |
|
500 |
ModelArts.3581 |
Failed to create edge certificates. |
Failed to create the edge certificate. |
Contact service O&M personnel. |
|
500 |
ModelArts.3801 |
invalid token, can not get template ak/sk. |
Failed to obtain the template AK/SK due to an invalid token. |
Obtain a new token and try again. |
|
500 |
ModelArts.3802 |
Failed to create API group {name} because {reason}. |
Failed to create the API group {name}. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3803 |
Failed to register API {name} because {reason}. |
Failed to register the API {name}. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3804 |
upload file to obs failed. |
Failed to upload the file to OBS. |
Contact R&D and O&M personnel. |
|
500 |
ModelArts.3805 |
Failed to create AI service {name} because {reason}. |
Failed to create the AI service {name}. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3806 |
Failed to update AI service {name} because {reason}. |
Failed to update the AI service {name}. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3807 |
Failed to delete AI service {name} because {reason}. |
Failed to delete the AI service {name}. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3808 |
Failed to create AI subservice {name} because {reason}. |
Failed to create the sub-service {name}. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3809 |
Failed to update AI subservice {name} because {reason}. |
Failed to update the sub-service {name}. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3810 |
Failed to create the agency because {reason}. |
Failed to create the agency. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3819 |
Failed to delete the agency definition. |
Failed to delete the service agency definition. |
Contact service O&M personnel. |
|
500 |
ModelArts.3858 |
Failed to bind task type to API {id} because {reason}. |
Failed to bind task type to API {ID}. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3859 |
Failed to unbind task type from API {id} because {reason}. |
Failed to unbind the task type from API {ID}. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3860 |
Failed to create the task type because {reason}. |
Failed to create the task type. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3861 |
Failed to update the task type because {reason}. |
Failed to update the task. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3891 |
Failed to operate the serverless cluster because {reason}. |
Failed to operate the serverless cluster. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3893 |
Failed to forward the CBC request to the cloud service. |
Failed to forward the CBC request to the cloud service. |
Contact service O&M personnel. |
|
500 |
ModelArts.3901 |
license id ({0}) is not exist. |
License ID {0} does not exist. |
Check whether the license ID is valid. |
|
500 |
ModelArts.3902 |
Failed to get license info because ({0}). |
Failed to obtain the license because {Reason}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3903 |
Renew license failed because ({0}). |
Failed to renew the license because {Reason}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3904 |
Upload data failed because ({0}). |
Failed to report the used quota because {Reason}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3905 |
Failed to get app key. |
Failed to obtain the app key. |
Contact R&D and O&M personnel. |
|
500 |
ModelArts.3906 |
Failed to create license because ({0}). |
Failed to create the license because {Reason}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3907 |
Failed to delete license because ({0}). |
Failed to delete the license because {Reason}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3908 |
Failed to get CBC resources. |
Failed to obtain CBC resources. |
Check the license ID or the associated license configuration. |
|
500 |
ModelArts.3909 |
access CBC failed. |
Failed to access CBC. |
Contact R&D and O&M personnel. |
|
500 |
ModelArts.3910 |
Check CBC auth failed because ({0}). |
Failed to authorize CBC operations because {Reason}. |
Locate the fault based on the failure cause. Renewal authentication fails because cloudservicetype is not provided. Unsubscription authentication fails because an instance is being deployed. |
|
500 |
ModelArts.3921 |
Failed to create the app-auth API because {reason}. |
Failed to register the API that supports application authentication. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3924 |
Failed to create the application code for application {id} because {reason}. |
Failed to create the AppCode of the application {ID}. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3925 |
Failed to delete app-auth api {id} because {reason}. |
Failed to delete API {ID} that supports application authentication. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3926 |
Failed to reset the secret of application {id} because {reason}. |
Failed to reset the private key of the application {ID}. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3927 |
Failed to reset the application code of application {id} because {reason}. |
Failed to reset the AppCode of the application {ID}. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3928 |
Failed to obtain the app-auth API information because {reason}. |
Failed to obtain information about the API that supports application authentication. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3932 |
Failed to obtain the application information because {reason}. |
Failed to obtain the application information. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3933 |
Failed to delete application {id} because {reason}. |
Failed to delete the application {ID}. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3934 |
Failed to delete the application code of application {id} because {reason}. |
Failed to delete the AppCode of the application {ID}. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3937 |
Failed to authorize the app-auth API to the application because {reason}. |
Failed to authorize the API to the application. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.3938 |
Failed to unbind the app-auth API from the application because {reason}. |
Failed to cancel the authorization from the API to the application. Fault cause: {fault cause}. |
Locate the fault based on the failure cause. |
|
500 |
ModelArts.4105 |
Failed to obtain the temporary AK/SK. |
An exception occurred when obtaining the temporary AK/SK. |
Internal error. Contact technical support. |
|
500 |
ModelArts.4106 |
Failed to obtain the OBS agency. |
Obtaining the OBS agency failed. |
Authorize the OBS agency. |
|
500 |
ModelArts.4204 |
Request API error. %s |
Multiple APIs matched. |
Ensure no conflict occurs in API planning. |
|
500 |
ModelArts.4301 |
Failed to obtain %s. |
Obtaining the token of the cloud service administrator failed. |
Internal error. Contact technical support. |
|
500 |
ModelArts.4302 |
Gateway forwarding error because %s. |
Accessing the service is rejected. |
Ensure the service to be accessed is running properly. |
|
500 |
ModelArts.4354 |
Insufficient quota |
The number of created datasets has reached the maximum allowed limit. |
Delete unused datasets or apply for a higher quota. |
|
500 |
ModelArts.4360 |
Sync data source error |
Failed to synchronize the data source. |
Check the synchronization task status and result. |
|
500 |
ModelArts.4367 |
Update dataset state failed |
Failed to delete the dataset. |
Check the dataset status. |
|
500 |
ModelArts.4373 |
No migratory job |
Failed to create the dataset migration task. |
Check whether the source dataset of the migration task is valid. |
|
500 |
ModelArts.4424 |
Delete sample failed |
Failed to delete the dataset sample. |
Ensure that the sample to be deleted is correct and that there is unfinished import or synchronization task. |
|
500 |
ModelArts.4503 |
Failed to obtain the backend service because %s. |
The service does not exist. |
Ensure the service to be accessed is available. |
|
500 |
ModelArts.4505 |
Internal backend service error because reading timed out. |
Internal server error. |
Ensure the service to be accessed is running properly. |
|
500 |
ModelArts.4614 |
Task failed |
Failed to run the task. |
Check the execution result of the processor task. |
|
500 |
ModelArts.4801 |
Failed to obtain the consul %s. |
Obtaining service instances for Consul failed. |
Internal error. Contact technical support. |
|
500 |
ModelArts.5000 |
Please try again later or contact customer service to solve the problem |
Internal error. |
System error. Contact technical support. |
|
500 |
ModelArts.5003 |
Internal Error: access IAM service failed |
Failed to access IAM. |
System error. Contact technical support. |
|
500 |
ModelArts.5004 |
Internal Error: access moderation service failed. |
Failed to access Text Moderation. |
System error. Contact technical support. |
|
500 |
ModelArts.5005 |
Internal Error: access ModelArts service failed |
Failed to access ModelArts. |
System error. Contact technical support. |
|
500 |
ModelArts.5006 |
Internal Error: access AI service failed |
Failed to access the managed services in AI Gallery. |
System error. Contact technical support. |
|
500 |
ModelArts.5007 |
Internal Error: access AI manager failed |
Failed to access the manager services in AI Gallery. |
System error. Contact technical support. |
|
500 |
ModelArts.5008 |
Internal Error: access SMN service failed |
Failed to access SMN. |
System error. Contact technical support. |
|
500 |
ModelArts.5009 |
Database operation failed |
Database operation error. |
System error. Contact technical support. |
|
500 |
ModelArts.5010 |
OBS operation failed |
Failed to access OBS. |
System error. Contact technical support. |
|
500 |
ModelArts.5019 |
Internal Error: access CBC service failed |
Failed to access CBC. |
System error. Contact technical support. |
|
500 |
ModelArts.5021 |
Internal Error: access LCS service failed |
Failed to access LCS. |
System error. Contact technical support. |
|
500 |
ModelArts.5039 |
Dear User,the traffic is a little busy. Please try again later |
Excessive requests. |
Try again later. |
|
500 |
ModelArts.5050 |
Internal Error: access Hilens service failed |
Failed to access HiLens. |
System error. Contact technical support. |
|
500 |
ModelArts.5100 |
The import path illegal. |
The import path illegal. |
Please select another object. |
|
500 |
ModelArts.5101 |
The item version already exists. |
The item version already exists. |
Select another version. |
|
500 |
ModelArts.5300 |
Failed to explore the user source address. |
Failed to traverse user source addresses. |
System error. Contact technical support. |
|
500 |
ModelArts.5301 |
Failed to download the source file from OBS. |
Failed to download the source file from OBS. |
System error. Contact technical support. |
|
500 |
ModelArts.5302 |
Failed to upload the source file to the destination address. |
Failed to upload the source file to the destination address. |
System error. Contact technical support. |
|
500 |
ModelArts.5308 |
Internal Error: access VAS service failed |
Failed to access VAS. |
System error. Contact technical support. |
|
500 |
ModelArts.5311 |
Failed to get market category id. |
No market category ID found. |
System error. Contact technical support. |
|
500 |
ModelArts.5401 |
Fail to Crypt. |
Fail to Crypt. |
Please re-encrypt or decrypt. |
|
500 |
ModelArts.6102 |
The server has encountered an error and fails to process the request. Please try again later or submit a service ticket. |
Internal error. |
System error. Contact technical support. |
|
500 |
ModelArts.6200 |
No resources available. Please try again later or submit a service ticket. |
Internal error. |
System error. Contact technical support. |
|
500 |
ModelArts.6691 |
System error. Check the service status. |
The algorithm service is abnormal. |
System error. Check the service state. |
|
500 |
ModelArts.6692 |
System error. Check the service status. |
The dataset service is abnormal. |
System error. Check the service state. |
|
500 |
ModelArts.6699 |
Internal error. |
Network error. |
Check network connectivity. |
|
500 |
ModelArts.7001 |
Workspace internal error. |
An unknown error occurs in the workspace. |
System error. Contact technical support. |
|
500 |
ModelArts.7008 |
workspace in read-only status, please wait a few minutes |
The workspace is abnormal. Only the read-only operation is supported. |
System error. Contact technical support. |
|
500 |
ModelArts.7009 |
call {apiType} api failed |
The workspace is abnormal. |
System error. Contact technical support. |
|
500 |
ModelArts.7100 |
get enterprise project id failed |
EPS request error. |
System error. Contact technical support. |
|
500 |
ModelArts.7101 |
Call pdp auth api failed. |
PDP request error. |
System error. Contact technical support. |
|
501 |
ModelArts.4383 |
Unsupported operation, dataset %s type is %s |
The operation cannot be performed in the dataset. |
Check whether the dataset supports the current operation. |
|
501 |
ModelArts.4385 |
Auto deploy task exist |
Failed to start the deploy task because an auto deploy task is being executed in the dataset. |
Start a new deploy task after the current task is complete. |
|
501 |
ModelArts.4386 |
Auto labeling task exist |
Failed to start the auto labeling task because an auto labeling task is being executed in the dataset. |
Start a new auto labeling task after the current task is complete. |
|
501 |
ModelArts.4387 |
Pre-label task exist |
Failed to start the pre-labeling task because a pre-labeling task is being executed in the dataset. |
Start a new pre-labeling task after the current task is complete. |
|
501 |
ModelArts.4394 |
Task is running |
Failed to obtain the migration result because a migration task is being executed in the dataset. |
Wait until the migration task is complete. |
|
503 |
ModelArts.4302 |
Gateway forwarding error because %s. |
The backend service is unavailable. |
Internal error. Contact technical support. |
|
503 |
ModelArts.4700 |
Unavailable gateway. |
The gateway is being stopped. |
The platform is being upgraded. Try again later. |
|
504 |
ModelArts.4503 |
Failed to obtain the backend service because %s. |
The response from the backend service timed out. |
Ensure the service to be accessed is running properly. |
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot
