Creating a Load Balancer_Elastic Load Balance

Function

This API is used to create a dedicated load balancer. When you create a dedicated load balancer, note the following:

Specify vip_subnet_cidr_id if you want to bind a private IPv4 address to the dedicated load balancer.
Specify publicip and either vpc_id or vip_subnet_cidr_id if you want to bind a new IPv4 EIP to the dedicated load balancer.
Specify publicip_ids and either vpc_id or vip_subnet_cidr_id if you want to bind an existing IPv4 EIP to the dedicated load balancer.
Specify ipv6_vip_virsubnet_id if you want to bind a private IPv6 address to the dedicated load balancer.
Specify both ipv6_vip_virsubnet_id and ipv6_bandwidth if you want to bind a public IPv6 address to the dedicated load balancer.
You cannot bind an existing and unoccupied private IPv4 address, IPv6 address, or public IPv6 address to the dedicated load balancer.
You must specify the ID of a flavor at Layer 4 for l4_flavor_id and the ID of a flavor at Layer 7 for l7_flavor_id.

Constraints

There are some constraints when you create a dedicated load balancer:

vpc_id, vip_subnet_cidr_id, and ipv6_vip_virsubnet_id cannot be left blank at the same time.
ip_target_enable specifies whether to enable IP as a Backend. If you enable this function for a dedicated load balancer, you can associate servers in a VPC connected through a VPC peering connection, in a VPC connected through a cloud connection, or in an on-premises data center at the other end of a Direct Connect or VPN connection, by using server IP addresses.
admin_state_up must be set to true.
provider must be set to vlb.
elb_virsubnet_ids indicates the subnets that support IPv4/IPv6 dual stack or only IPv4 subnets. If only IPv4 subnets are supported, ipv6_vip_virsubnet_id must be left blank.
If you bind an EIP to the load balancer during creation, you cannot unbind it from the load balancer by calling the API after the load balancer is created. Instead, you can unbind the EIP only on the ELB console. Locate the dedicated load balancer in the load balancer list and click More > Unbind EIP in the Operation column.
publicip_ids and publicip cannot be specified at the same time. Set either publicip_ids to bind an existing EIP to the load balancer, or publicip to bind a new EIP to the load balancer, or neither of them.
If you want to add the load balancer to a shared bandwidth, you must specify the ID of the shared bandwidth. If you want the load balancer to use a new dedicated bandwidth, charge_mode, share_type, and size are required.

Calling Method

For details, see Calling APIs.

URI

POST /v3/{project_id}/elb/loadbalancers

**Table 1** Path Parameters
Parameter	Mandatory	Type	Description
project_id	Yes	String	Specifies the project ID of the load balancer. Minimum: 0 Maximum: 36

Request Parameters

**Table 2** Request header parameters
Parameter	Mandatory	Type	Description
X-Auth-Token	No	String	Specifies the token used for IAM authentication. Minimum: 0 Maximum: 4096

**Table 3** Request body parameters
Parameter	Mandatory	Type	Description
loadbalancer	Yes	CreateLoadBalancerOption object	Specifies the load balancer.

**Table 4** CreateLoadBalancerOption
Parameter	Mandatory	Type	Description
id	No	String	Specifies the ID of a load balancer. This parameter is unsupported. Please do not use it. Minimum: 0 Maximum: 36
project_id	No	String	Specifies the project ID. Minimum: 1 Maximum: 32
name	No	String	Specifies the load balancer name. Minimum: 0 Maximum: 255
description	No	String	Provides supplementary information about the load balancer. Minimum: 0 Maximum: 255
vip_address	No	String	Specifies the private IPv4 address bound to the load balancer. The IP address must be from the IPv4 subnet where the load balancer resides and should not be occupied by other services. Note: vip_subnet_cidr_id is also required if vip_address is passed. If only vip_subnet_cidr_id is passed, the system will automatically assign a private IPv4 address to the load balancer. If both vip_address and vip_subnet_cidr_id are not passed, no private IPv4 address will be assigned, and the value of vip_address will be null.
vip_subnet_cidr_id	No	String	Specifies the ID of the IPv4 subnet where the load balancer resides. This parameter is mandatory if you need to create a load balancer with a private IPv4 address. You can query parameter neutron_subnet_id in the response by calling the API (GET https://{VPC_Endpoint}/v1/{project_id}/subnets). Note: vpc_id, vip_subnet_cidr_id and ipv6_vip_virsubnet_id cannot be left blank at the same time. The subnet specified by vip_subnet_cidr_id and the subnet specified by ipv6_vip_virsubnet_id must be in the VPC specified by vpc_id. The subnet specified by vip_subnet_cidr_id must be in the VPC specified by vpc_id if both vpc_id and vip_subnet_cidr_id are passed. Minimum: 1 Maximum: 36
ipv6_vip_virsubnet_id	No	String	Specifies the ID of the IPv6 subnet where the load balancer resides. You can query neutron_network_id in the response by calling the API (GET https://{VPC_Endpoint}/v1/{project_id}/subnets). Note: vpc_id, vip_subnet_cidr_id and ipv6_vip_virsubnet_id cannot be left blank at the same time. The subnet specified by vip_subnet_cidr_id and the subnet specified by ipv6_vip_virsubnet_id must be in the VPC specified by vpc_id. IPv6 must have been enabled for the IPv6 subnet where the load balancer resides.
provider	No	String	Specifies the provider of the load balancer. The value can only be vlb. Minimum: 1 Maximum: 255
l4_flavor_id	No	String	Specifies the ID of a flavor at Layer 4. All load balancers share underlying resources. This parameter is unsupported. Please do not use it. Minimum: 1 Maximum: 36
l7_flavor_id	No	String	Specifies the ID of a flavor at Layer 7. All load balancers share underlying resources. This parameter is unsupported. Please do not use it. Minimum: 1 Maximum: 36
guaranteed	No	Boolean	Specifies whether the load balancer is a dedicated load balancer. true (default): The load balancer is a dedicated load balancer. false: The load balancer is a shared load balancer. Currently, the value can only be true. If the value is set to false, 400 Bad Request will be returned.
vpc_id	No	String	Specifies the ID of the VPC where the load balancer resides. You can query parameter id in the response by calling the API (GET https://{VPC_Endpoint}/v1/{project_id}/vpcs). vpc_id, vip_subnet_cidr_id and ipv6_vip_virsubnet_id cannot be left blank at the same time. The subnet specified by vip_subnet_cidr_id and the subnet specified by ipv6_vip_virsubnet_id must be in the VPC specified by vpc_id.
availability_zone_list	Yes	Array of strings	Specifies the list of AZs where the load balancer can be created. You can query the AZs by calling the API (GET https://{ELB_Endpoint}/v3/{project_id}/elb/availability-zones). Select one or more AZs in the same set.
enterprise_project_id	No	String	Specifies the ID of the enterprise project that the load balancer belongs to. The value cannot be "", "0", or the ID of an enterprise project that does not exist. If this parameter is not passed during resource creation, the resource belongs to the default enterprise project, and 0 will be returned.
tags	No	Array of Tag objects	Lists the tags added to the load balancer. Example: "tags":[{"key":"my_tag","value":"my_tag_value"}]
admin_state_up	No	Boolean	Specifies the administrative status of the load balancer. The value can only be true (default).
ipv6_bandwidth	No	BandwidthRef object	Specifies the ID of the bandwidth used by an IPv6 address. This parameter is available only when you create or update a load balancer with a public IPv6 address. If you use a new IPv6 address and specify a shared bandwidth, the IPv6 address will be added to the shared bandwidth.
publicip_ids	No	Array of strings	Specifies the ID of the EIP the system will automatically assign and bind to the load balancer during load balancer creation. Only the first EIP will be bound to the load balancer although multiple EIP IDs can be set.
publicip	No	CreateLoadBalancerPublicIpOption object	Specifies the new EIP that will be bound to the load balancer.
elb_virsubnet_ids	No	Array of strings	Lists subnet IDs on the downstream plane. You can query parameter neutron_network_id in the response by calling the API (GET https://{VPC_Endpoint}/v1/{project_id}/subnets). If this parameter is not specified, the subnet IDs will be returned based on the following rules: If IPv6 is enabled for a load balancer, the subnet IDs specified in ipv6_vip_virsubnet_id will be returned. If IPv6 is not enabled for a load balancer, the subnet IDs specified in vip_subnet_cidr_id will be returned. If a load balancer only works on the public network, the ID of any subnet in the VPC where the load balancer is deployed will be returned. The subnet that has the most available IP addresses is preferred. If there is more than one subnet, the first subnet in the list will be used to assign IP addresses. The subnet must be in the VPC where the load balancer works.
ip_target_enable	No	Boolean	Specifies whether to enable IP as a backend. The value can be true (enable IP as a backend) or false (disable IP as a backend). This function cannot be disabled after it is enabled. If you enable this function, you can add servers in a VPC connected through a VPC peering connection, in a VPC connected through a cloud connection, or in an on-premises data center at the other end of a Direct Connect or VPN connection, by using their IP addresses. If you enable this function for a dedicated load balancer deployed in a shared VPC, ensure that a VPC peering connection has been created. This function is available only for dedicated load balancers.
deletion_protection_enable	No	Boolean	Specifies whether to enable deletion protection for the load balancer. true: Enable deletion protection. false (default): Disable deletion protection. NOTE: Disable deletion protection for all your resources before deleting your account.
autoscaling	No	CreateLoadbalancerAutoscalingOption object	Specifies the information about elastic scaling. If elastic scaling is enabled, the load balancer specifications can be automatically adjusted based on incoming traffic. Note: This parameter is only available for users on the whitelist. If elastic scaling is enabled, l4_flavor_id indicates the maximum Layer-4 flavor for elastic scaling. l7_flavor_id indicates the maximum Layer-7 flavor for elastic scaling. This parameter is unsupported. Please do not use it.
ipv6_vip_address	No	String	Specifies the IPv6 address bound to the load balancer.

**Table 5** Tag
Parameter	Mandatory	Type	Description
key	No	String	Specifies the tag key. Minimum: 1 Maximum: 36
value	No	String	Specifies the tag value. Minimum: 0 Maximum: 43

**Table 6** BandwidthRef
Parameter	Mandatory	Type	Description
id	Yes	String	Specifies the shared bandwidth ID.

**Table 7** CreateLoadBalancerPublicIpOption
Parameter	Mandatory	Type	Description
ip_version	No	Integer	Specifies the IP address version. The value can be 4 (IPv4) or 6 (IPv6). Default: 4
network_type	Yes	String	Specifies the EIP type. The default value is 5_bgp. For more information, see the API for assigning an EIP in the Virtual Private Cloud API Reference. Minimum: 1 Maximum: 36
billing_info	No	String	Provides billing information about the EIP. If the value is left blank, the EIP is billed in pay-per-use mode. If the value is not left blank, the EIP is billed on a yearly/monthly basis. This parameter is unsupported. Please do not use it. Minimum: 1 Maximum: 1024
description	No	String	Provides supplementary information about the EIP. Minimum: 1 Maximum: 255
bandwidth	Yes	CreateLoadBalancerBandwidthOption object	bandwidth

**Table 8** CreateLoadBalancerBandwidthOption
Parameter	Mandatory	Type	Description
name	No	String	Specifies the bandwidth name. The value can contain 1 to 64 characters, including letters, digits, underscores (_), hyphens (-), and periods. Note: This parameter is mandatory if share_type is set to PER. This parameter will be ignored if the bandwidth reference has a specific ID. Minimum: 1 Maximum: 64
size	No	Integer	Specifies the bandwidth range. The default range is 1 Mbit/s to 2,000 Mbit/s. (The specific range may vary depending on the configuration in each region. You can see the available bandwidth range on the management console.) Note: The minimum increment for bandwidth adjustment varies depending on the bandwidth range. The following are the details: The minimum increment is 1 Mbit/s if the bandwidth range is from 0 Mbit/s to 300 Mbit/s. The minimum increment is 50 Mbit/s if the bandwidth range is from 301 Mbit/s to 1,000 Mbit/s. The minimum increment is 500 Mbit/s if the bandwidth is greater than 1,000 Mbit/s. This parameter is mandatory if id is set to null. Minimum: 0 Maximum: 99999
charge_mode	No	String	Specifies how the bandwidth used by the EIP is billed. traffic: The bandwidth will be billed by traffic. bandwidth: The bandwidth will be billed by fixed bandwidth. This parameter is mandatory if id is set to null. Minimum: 1 Maximum: 36
share_type	No	String	Specifies the bandwidth type. PER: indicates dedicated bandwidth. WHOLE: indicates shared bandwidth. Note: This parameter is mandatory when id is set to null. It will be ignored if the value of id is not null. The bandwidth ID must be specified if the bandwidth type is set to WHOLE. The bandwidth type cannot be WHOLE for IPv6 EIPs.
billing_info	No	String	Specifies bandwidth billing information. This parameter is unsupported. Please do not use it. Minimum: 1 Maximum: 1024
id	No	String	Specifies the ID of the shared bandwidth to which the IP address bound to the load balancer is added. Note: The value is the bandwidth ID when share_type is set to WHOLE. Minimum: 1 Maximum: 36

**Table 9** CreateLoadbalancerAutoscalingOption
Parameter	Mandatory	Type	Description
enable	Yes	Boolean	Specifies whether to enable elastic scaling for the load balancer. Default: false
min_l7_flavor_id	No	String	Specifies the ID of the minimum Layer-7 flavor for elastic scaling. This parameter cannot be left blank if there are HTTP or HTTPS listeners. This parameter has been discarded but still can be passed for compatibility reasons. If you specify this parameter, you will be charged for the minimum Layer-7 flavor. Minimum: 1 Maximum: 36

Response Parameters

Status code: 201

**Table 10** Response body parameters
Parameter	Type	Description
loadbalancer	LoadBalancer object	Specifies the load balancer.
loadbalancer_id	String	Specifies the load balancer ID. (This parameter is returned when the billing mode of the load balancer is yearly/monthly. This parameter is unsupported. Please do not use it. Minimum: 0 Maximum: 36
order_id	String	Specifies the order No. (This parameter is returned when the billing mode of the load balancer is yearly/monthly.) This parameter is unsupported. Please do not use it. Minimum: 0 Maximum: 36
request_id	String	Specifies the request ID. The value is automatically generated. Minimum: 0 Maximum: 36

**Table 11** LoadBalancer
Parameter	Type	Description
id	String	Specifies the load balancer ID.
description	String	Provides supplementary information about the load balancer. Minimum: 1 Maximum: 255
provisioning_status	String	Specifies the provisioning status of the load balancer. The value can be one of the following: ACTIVE: The load balancer is successfully provisioned. PENDING_DELETE: The load balancer is being deleted.
admin_state_up	Boolean	Specifies the administrative status of the load balancer. The value can be true or false. true indicates the load balancer is enabled and false indicates the load balancer is disabled.
provider	String	Specifies the provider of the load balancer. The value can only be vlb.
pools	Array of PoolRef objects	Lists the IDs of backend server groups associated with the load balancer.
listeners	Array of ListenerRef objects	Lists the IDs of listeners added to the load balancer.
operating_status	String	Specifies the operating status of the load balancer. The value can only be ONLINE, indicating that the load balancer is running normally.
name	String	Specifies the load balancer name.
project_id	String	Specifies the project ID of the load balancer.
vip_subnet_cidr_id	String	Specifies the ID of the IPv4 subnet where the load balancer resides.
vip_address	String	Specifies the private IPv4 address bound to the load balancer.
vip_port_id	String	Specifies the ID of the port bound to the private IPv4 address of the load balancer.
tags	Array of Tag objects	Lists the tags added to the load balancer.
created_at	String	Specifies the time when the load balancer was created, in the format of yyyy-MM-dd''T''HH:mm:ss''Z''.
updated_at	String	Specifies the time when the load balancer was updated, in the format of yyyy-MM-dd''T''HH:mm:ss''Z''.
guaranteed	Boolean	Specifies whether the load balancer is a dedicated load balancer. true (default): The load balancer is a dedicated load balancer. false: The load balancer is a shared load balancer.
vpc_id	String	Specifies the ID of the VPC where the load balancer resides.
eips	Array of EipInfo objects	Specifies the EIP bound to the load balancer. Only one EIP can be bound to a load balancer. This parameter has the same meaning as publicips.
ipv6_vip_address	String	Specifies the IPv6 address bound to the load balancer.
ipv6_vip_virsubnet_id	String	Specifies the ID of the IPv6 subnet where the load balancer resides.
ipv6_vip_port_id	String	Specifies the ID of the port bound to the IPv6 address of the load balancer.
availability_zone_list	Array of strings	Specifies the list of AZs where the load balancer is created.
enterprise_project_id	String	Specifies the enterprise project ID. If this parameter is not passed during resource creation, "0" will be returned, and the resource belongs to the default enterprise project. "0" is not a valid enterprise project ID and cannot be used in the APIs for creating, updating the load balancer, or querying details of the load balancer.
billing_info	String	Provides resource billing information. If the value is left blank, the resource is billed in pay-per-use mode. If the value is not left blank, the resource is billed on a yearly/monthly basis. The value is in the format of order_id:product_id:region_id:project_id, for example, CS2107161019CDJZZ:OFFI569702121789763584:az1:057ef081eb00d2732fd1c01a9be75e6f. This parameter is unsupported. Please do not use it. Minimum: 1 Maximum: 1024
l4_flavor_id	String	Specifies the ID of a flavor at Layer 4. If autoscaling.enable is set to true, this parameter indicates the ID of the maximum flavor. If l4 is specified, you will charged by the specifications you select. If L4_elastic_max is specified, you will charged by how many LCUs you use. All load balancers share underlying resources. This parameter is unsupported. Please do not use it. Minimum: 1 Maximum: 255
l4_scale_flavor_id	String	Specifies the ID of the reserved flavor at Layer 4. This parameter is unsupported. Please do not use it. Minimum: 1 Maximum: 255
l7_flavor_id	String	Specifies the ID of a flavor at Layer 7. If autoscaling.enable is set to true, this parameter indicates the ID of the maximum flavor. If l7 is specified, you will charged by the specifications you select. If L7_elastic_max is specified, you will charged by how many LCUs you use. All load balancers share underlying resources. This parameter is unsupported. Please do not use it. Minimum: 1 Maximum: 255
l7_scale_flavor_id	String	Specifies the ID of the reserved flavor at Layer 7. This parameter is unsupported. Please do not use it. Minimum: 1 Maximum: 255
publicips	Array of PublicIpInfo objects	Specifies the EIP bound to the load balancer. Only one EIP can be bound to a load balancer. This parameter has the same meaning as eips.
global_eips	Array of GlobalEipInfo objects	Specifies the global EIP bound to the load balancer. Only the first global EIP specified under global_eips will be bound.
elb_virsubnet_ids	Array of strings	Lists the IDs of subnets on the downstream plane.
elb_virsubnet_type	String	Specifies the type of the subnet on the downstream plane. ipv4: IPv4 subnet dualstack: subnet that supports IPv4/IPv6 dual stack
ip_target_enable	Boolean	Specifies whether to enable IP as a backend. The value can be true (enable IP as a backend) or false (disable IP as a backend). This function cannot be disabled after it is enabled. If you enable this function, you can add servers in a VPC connected through a VPC peering connection, in a VPC connected through a cloud connection, or in an on-premises data center at the other end of a Direct Connect or VPN connection, by using their IP addresses. If you enable this function for a dedicated load balancer deployed in a shared VPC, ensure that a VPC peering connection has been created. This function is available only for dedicated load balancers.
frozen_scene	String	Specifies the scenario where the load balancer is frozen. Multiple values are separated using commas (,).
ipv6_bandwidth	BandwidthRef object	Specifies the ID of the bandwidth used by an IPv6 address. This parameter is available only when you create or update a load balancer with a public IPv6 address. If you use a new IPv6 address and specify a shared bandwidth, the IPv6 address will be added to the shared bandwidth.
deletion_protection_enable	Boolean	Specifies whether to enable deletion protection for the load balancer. true: Enable deletion protection. false (default): Disable deletion protection. NOTE: Disable deletion protection for all your resources before deleting your account.
autoscaling	AutoscalingRef object	Specifies information about elastic scaling. If elastic scaling is enabled, the load balancer specifications can be automatically adjusted based on incoming traffic. Note: This parameter is only available for users on the whitelist. If elastic scaling is enabled, l4_flavor_id indicates the maximum Layer-4 flavor for elastic scaling. l7_flavor_id indicates the maximum Layer-7 flavor for elastic scaling. This parameter is unsupported. Please do not use it.
public_border_group	String	Specifies the AZ group to which the load balancer belongs.
charge_mode	String	Specifies the billing mode. The value can be one of the following: flavor: billed by the specifications you will select lcu: billed by LCU usage
waf_failure_action	String	Specifies traffic distributing policies when the WAF is faulty. discard: Traffic will not be distributed. forward: Traffic will be distributed to the default backend servers. Note: This parameter takes effect only when WAF is enabled for the load balancer. This parameter is unsupported. Please do not use it.
log_group_id	String	Specifies the ID of the log group that is associated with the load balancer.
log_topic_id	String	Specifies the ID of the log topic that is associated with the load balancer.

**Table 12** PoolRef
Parameter	Type	Description
id	String	Specifies the ID of the backend server group.

**Table 13** ListenerRef
Parameter	Type	Description
id	String	Specifies the listener ID.

**Table 14** Tag
Parameter	Type	Description
key	String	Specifies the tag key. Minimum: 1 Maximum: 36
value	String	Specifies the tag value. Minimum: 0 Maximum: 43

**Table 15** EipInfo
Parameter	Type	Description
eip_id	String	eip_id
eip_address	String	eip_address
ip_version	Integer	Specifies the IP version. 4 indicates IPv4, and 6 indicates IPv6.

**Table 16** PublicIpInfo
Parameter	Type	Description
publicip_id	String	Specifies the EIP ID.
publicip_address	String	Specifies the IP address.
ip_version	Integer	Specifies the IP version. The value can be 4 (IPv4) or 6 (IPv6).

**Table 17** GlobalEipInfo
Parameter	Type	Description
global_eip_id	String	Specifies the ID of the global EIP.
global_eip_address	String	Specifies the global EIP.
ip_version	Integer	Specifies the IP version. The value can be 4 and 6. 4 indicates an IPv4 address, and 6 indicates an IPv6 address.

**Table 18** BandwidthRef
Parameter	Type	Description
id	String	Specifies the shared bandwidth ID.

**Table 19** AutoscalingRef
Parameter	Type	Description
enable	Boolean	Specifies whether to enable elastic scaling for the load balancer. true: Enable elastic scaling. false (default): Disable elastic scaling.
min_l7_flavor_id	String	Specifies the ID of the minimum Layer-7 flavor for elastic scaling. This parameter cannot be left blank if there are HTTP or HTTPS listeners. This parameter has been discarded but still can be passed for compatibility reasons. If you specify this parameter, you will be charged for the minimum Layer-7 flavor Minimum: 1 Maximum: 36

Example Requests

Example 1: Creating a load balancer with a private IPv4 address

POST https://{ELB_Endponit}/v3/060576798a80d5762fafc01a9b5eedc7/elb/loadbalancers

{
  "loadbalancer" : {
    "name" : "loadbalancer",
    "description" : "simple lb",
    "vip_subnet_cidr_id" : "1992ec06-f364-4ae3-b936-6a8cc24633b7",
    "admin_state_up" : true,
    "availability_zone_list" : [ "AZ1" ]
  }
}

Example 2: Creating a load balancer with an IPv4 EIP

POST https://{ELB_Endponit}/v3/060576782980d5762f9ec014dd2f1148/elb/loadbalancers

{
  "loadbalancer" : {
    "vip_subnet_cidr_id" : "e6e9271d-aef4-48f0-a93a-ccc7b09032c1",
    "availability_zone_list" : [ "AZ1" ],
    "admin_state_up" : true,
    "publicip" : {
      "network_type" : "5_bgp",
      "bandwidth" : {
        "size" : 2,
        "share_type" : "PER",
        "charge_mode" : "bandwidth",
        "name" : "bandwidth_test"
      }
    },
    "name" : "elb_eip-test"
  }
}

Example Responses

Status code: 201

Normal response to POST requests.

{
  "loadbalancer" : {
    "name" : "my_loadbalancer",
    "id" : "29cc669b-3ac8-4498-9094-bdf6193425c2",
    "project_id" : "060576798a80d5762fafc01a9b5eedc7",
    "description" : "",
    "vip_port_id" : "98697944-0cc7-4d3b-a829-001c2fb82232",
    "vip_address" : "192.168.0.214",
    "admin_state_up" : true,
    "provisioning_status" : "ACTIVE",
    "operating_status" : "ONLINE",
    "listeners" : [ ],
    "pools" : [ ],
    "tags" : [ {
      "key" : "tab_key",
      "value" : "tag1"
    } ],
    "provider" : "vlb",
    "created_at" : "2023-03-22T07:59:57Z",
    "updated_at" : "2023-03-22T07:59:59Z",
    "vpc_id" : "a1f33a4c-95b9-48a7-9350-684e2ed844b3",
    "enterprise_project_id" : "134f2181-5720-47e7-bd78-1356ed3737d6",
    "availability_zone_list" : [ ],
    "ipv6_vip_address" : null,
    "ipv6_vip_virsubnet_id" : null,
    "ipv6_vip_port_id" : null,
    "publicips" : [ {
      "publicip_id" : "3388574a-4f6f-4471-869e-97d74d21eee9",
      "publicip_address" : "88.88.87.205",
      "ip_version" : 4
    } ],
    "global_eips" : [ ],
    "elb_virsubnet_ids" : [ ],
    "elb_virsubnet_type" : null,
    "ip_target_enable" : false,
    "autoscaling" : {
      "enable" : false,
      "min_l7_flavor_id" : ""
    },
    "frozen_scene" : null,
    "public_border_group" : "center",
    "eips" : [ {
      "eip_id" : "3388574a-4f6f-4471-869e-97d74d21eee9",
      "eip_address" : "88.88.87.205",
      "ip_version" : 4
    } ],
    "guaranteed" : false,
    "billing_info" : null,
    "l4_flavor_id" : null,
    "l4_scale_flavor_id" : null,
    "l7_flavor_id" : null,
    "l7_scale_flavor_id" : null,
    "waf_failure_action" : "",
    "vip_subnet_cidr_id" : "abf31f3b-706e-4e55-a6dc-f2fcc707fd3a"
  },
  "request_id" : "bf29597181cb81b30d19f1a0115a157d"
}

Status Codes

Status Code	Description
201	Normal response to POST requests.

Error Codes

See Error Codes.

Creating a Load Balancer