Help Center/ Global SIM Link/ FAQs/ Activation/ How Do I Activate My IoT SIM Card After I Inserted It into a Device?
Updated on 2024-10-08 GMT+08:00
View PDF
Share

How Do I Activate My IoT SIM Card After I Inserted It into a Device?

Check whether the device is compatible with the network supported by the SIM card.

  • China Mobile IoT SIM cards only support 4G networks.
  • China Telecom IoT SIM cards only support 4G networks.
  • China Unicom IoT SIM cards support both 3G and 4G networks.
  • IoT SIM cards of carriers outside the Chinese mainland only support 4G networks.

If the activation fails, contact Huawei technical support.

Automatic Activation After Being Inserted into a Device and Powered On

An IoT SIM card will be automatically activated after being inserted into the device and powered on. This process usually takes about 30 seconds.

If a device does not work for a long time (for example, more than 10 minutes), you can set its APN (case-insensitive) and check whether the device works properly.

  • For a China Mobile IoT SIM card, set both the name and APN to cmiot.
  • For a China Telecom IoT SIM card, set both the name and APN to ctnet.
  • For a China Unicom SIM card, set both the name and APN to scuiot.

If the device still cannot work normally, contact Huawei technical support.

Activation on the Console

You can log in to the GSL console to view all SIM cards on the SIM Cards page.

You can activate a Testable or Activatable physical SIM card by clicking Activate in the Operation column. The request will be processed within one or two working days. The card status becomes In use after the activation.

Activating Cards in Batches

The total effective data of the forward data pool depends on the number of activated cards. You can activate physical SIM cards in the pool in batches.

On the Forward Data Pools page, click Batch Activate in the Operation column.

GSL provides four batch activation modes.
Table 1 Batch activation modes

Mode

Description

Pool

In this mode, the system activates all inactive physical SIM cards in the pool. Click OK and wait for the request to be processed.

Segment

In this mode, the system activates physical SIM cards in the pool according to their start and end numbers. Enter the start number and end number as required, click OK, and wait for the request to be processed.

NOTE:

Enter only digits. The container IDs between the start number and end number must be consecutive and the corresponding cards cannot be activated.

File

In this mode, the system activates physical SIM cards in the pool based on the file. Download the template file, edit and upload it as required, click OK, and wait for the request to be processed.

NOTE:

The SIM Card Status column in the template is for reference only. The system activates SIM cards in batches based on the uploaded Container ID column.

IDs

In this mode, the system activates physical SIM cards in the pool based on input IDs. Enter container IDs as required, click OK, and wait for the request to be processed.

NOTE:

A container ID can contain only digits.
Parent topic: Activation