Updated on 2022-01-25 GMT+08:00

Updating a DNAT Rule

Function

This API is used to update a DNAT rule.

You can update the rule only when status of the DNAT rule is set to ACTIVE and admin_state_up of the NAT gateway administrator to True. Either port_id or private_ip is used each time. If you create a rule that applies to all port types, set internal_service_port to 0, external_service_port to 0, and protocol to ANY.

The fields, including port_id, private_ip, internal_service_port, external_service_port, floating_ip_id, protocol, internal_service_port_range, and external_service_port_range must be updated together.

URI

PUT /v2/{project_id}/dnat_rules/{dnat_rule_id}

Table 1 Parameter description

Parameter

Mandatory

Type

Description

project_id

Yes

String

Specifies the project ID.

dnat_rule_id

Yes

String

Specifies the DNAT rule ID.

Request

Table 3 describes the request parameters.

Table 2 Parameter description

Parameter

Mandatory

Type

Description

dnat_rule

Yes

Object

Specifies the DNAT rule object. For details, see Table 3.

Table 3 Description of the dnat_rule field

Parameter

Mandatory

Type

Description

nat_gateway_id

Yes

String

Specifies the NAT gateway ID.

port_id

No

String

Specifies the port ID of an ECS or a BMS. This parameter and private_ip are alternative.

private_ip

No

String

Specifies the private IP address of a user, for example, the IP address of a VPC for Direct Connect connection. This parameter and port_id are alternative.

internal_service_port

No

Integer

Specifies the port used by ECSs or BMSs to provide services for external systems.

floating_ip_id

No

String

Specifies the EIP ID.

external_service_port

No

Integer

Specifies the port for providing external services.

protocol

No

String

Specifies the protocol type. Currently, TCP, UDP, and ANY are supported.

The protocol number of TCP, UDP, and ANY are 6, 17, and 0, respectively.

description

No

String(255)

Provides supplementary information about the DNAT rule.

internal_service_port_range

No

String

Specifies the port range used by ECSs or BMSs to provide services for external systems.

  • The port range is the same as the value of external _service_port_range.
  • The value ranges from 1 to 65535.
  • Specify two port numbers separated by a single hyphen (-) and no blank spaces in the format, x-y, where x is lower than y.

external_service_port_range

No

String

Specifies the port range used by the floating IP address for providing external services.

  • The port range is the same as the value of internal _service_port_range.
  • The value ranges from 1 to 65535.
  • Specify two port numbers separated by a single hyphen (-) and no blank spaces in the format, x-y, where x is lower than y.

Response

Table 4 lists response parameters.

Table 4 Response parameter

Parameter

Type

Description

dnat_rule

Object

Specifies the DNAT rule object.

Table 5 Description of the dnat_rule field

Parameter

Type

Description

id

String

Specifies the DNAT rule ID.

tenant_id

String

Specifies the project ID.

nat_gateway_id

String

Specifies the NAT gateway ID.

port_id

String

Specifies the port ID of an ECS or a BMS.

private_ip

String

Specifies the private IP address of a user, for example, the IP address of a VPC for Direct Connect connection.

internal_service_port

Integer

Specifies the port used by ECSs or BMSs to provide services for external systems.

floating_ip_id

String

Specifies the EIP ID.

floating_ip_address

String

Specifies the EIP.

external_service_port

Integer

Specifies the port for providing external services.

protocol

String

Specifies the protocol type. Currently, TCP, UDP, and ANY are supported.

The protocol number of TCP, UDP, and ANY are 6, 17, and 0, respectively.

description

String(255)

Provides supplementary information about the DNAT rule.

status

String

  • Specifies the status of the DNAT rule.
  • For details about all its values, see Table 1.

admin_state_up

Boolean

  • Specifies the unfrozen or frozen state.
  • The value can be:
    • true: indicates the unfrozen state.
    • false: indicates the frozen state.

created_at

String

  • Specifies when the DNAT rule is created (UTC time). Its value rounds to 6 decimal places for seconds. The format is yyyy-mm-dd hh:mm:ss.

internal_service_port_range

String

Specifies the port range used by ECSs or BMSs to provide services for external systems.

  • The port range is the same as the value of external _service_port_range.
  • The value ranges from 1 to 65535.

external_service_port_range

String

Specifies the port range used by the floating IP address for providing external services.

  • The port range is the same as the value of internal _service_port_range.
  • The value ranges from 1 to 65535.

Example

  • Example request
    1. Update a rule to apply to a specific port.
      PUT https://{Endpoint}/v2/d199ba7e0ba64899b2e81518104b1526/dnat_rules/79195d50-0271-41f1-bded-4c089b2502ff
      { 
           "dnat_rule": { 
               "nat_gateway_id": "a78fb3eb-1654-4710-8742-3fc49d5f04f8",
               "floating_ip_id": "cf99c679-9f41-4dac-8513-9c9228e713e1", 
               "port_id": "9a469561-daac-4c94-88f5-39366e5ea193", 
               "internal_service_port": 993, 
               "protocol": "tcp", 
               "external_service_port": 242, 
               "description": "my dnat rule 01"
           } 
       }
    2. Update a rule to apply to all ports.
      PUT https://{Endpoint}/v2/d199ba7e0ba64899b2e81518104b1526/dnat_rules/79195d50-0271-41f1-bded-4c089b2502ff
      { 
           "dnat_rule": { 
               "nat_gateway_id": "a78fb3eb-1654-4710-8742-3fc49d5f04f8",
               "floating_ip_id": "bf99c679-9f41-4dac-8513-9c9228e713e1",
               "private_ip": "192.168.1.100", 
               "internal_service_port": 0, 
               "protocol": "any", 
               "external_service_port": 0, 
              "description": "my dnat rule 01" 
           } 
       }
    3. Update the port range of a rule.
      PUT https://{Endpoint}/v2/d199ba7e0ba64899b2e81518104b1526/dnat_rules/79195d50-0271-41f1-bded-4c089b2502ff
      { 
           "dnat_rule": { 
               "nat_gateway_id": "a78fb3eb-1654-4710-8742-3fc49d5f04f8",
               "floating_ip_id": "bf99c679-9f41-4dac-8513-9c9228e713e1",
               "private_ip": "192.168.1.100", 
               "internal_service_port": 0, 
               "protocol": "tcp", 
               "external_service_port": 0, 
               "description": "my dnat rule 01" ,
               "external_service_port_range":"100-200",
               "internal_service_port_range":"100-200"
           } 
       }
    4. Update the description of a rule.
      PUT https://{Endpoint}/v2/d199ba7e0ba64899b2e81518104b1526/dnat_rules/79195d50-0271-41f1-bded-4c089b2502ff
      { 
           "dnat_rule": { 
              "nat_gateway_id": "a78fb3eb-1654-4710-8742-3fc49d5f04f8",
              "description": "my dnat rule 01"
           } 
      }
  • Example response
    1. Response to update a rule that applies to a specific port
      { 
           "dnat_rule": { 
               "status": "ACTIVE", 
               "nat_gateway_id": "a78fb3eb-1654-4710-8742-3fc49d5f04f8", 
               "admin_state_up": true, 
               "port_id": "9a469561-daac-4c94-88f5-39366e5ea193", 
               "internal_service_port": 993, 
               "protocol": "tcp", 
               "tenant_id": "abc", 
               "floating_ip_id": "cf99c679-9f41-4dac-8513-9c9228e713e1",
               "created_at": "2017-11-15 15:44:42.595173", 
               "id": "79195d50-0271-41f1-bded-4c089b2502ff", 
               "floating_ip_address": "5.21.11.226", 
               "external_service_port": 242, 
               "description": "my dnat rule 01" 
           } 
       }
    2. Response to update a rule that applies to all ports
      { 
           "dnat_rule": { 
               "status": "ACTIVE", 
               "nat_gateway_id": "a78fb3eb-1654-4710-8742-3fc49d5f04f8", 
               "admin_state_up": true, 
               "private_ip": "192.168.1.100", 
               "internal_service_port": 0, 
               "protocol": "any", 
               "tenant_id": "abc", 
               "floating_ip_id": "bf99c679-9f41-4dac-8513-9c9228e713e1",
               "created_at": "2017-11-15 15:44:42.595173", 
               "id": "79195d50-0271-41f1-bded-4c089b2502ff", 
               "floating_ip_address ": "5.21.11.227", 
               "external_service_port": 0, 
               "description": "my dnat rule 01" 
           } 
       }
    3. Response to update the port range of a rule
      { 
           "dnat_rule": { 
               "status": "ACTIVE", 
               "nat_gateway_id": "a78fb3eb-1654-4710-8742-3fc49d5f04f8", 
               "admin_state_up": true, 
               "private_ip": "192.168.1.100", 
               "internal_service_port": 0, 
               "protocol": "tcp", 
               "tenant_id": "abc", 
               "floating_ip_id": "bf99c679-9f41-4dac-8513-9c9228e713e1",
               "created_at": "2017-11-15 15:44:42.595173", 
               "id": "79195d50-0271-41f1-bded-4c089b2502ff", 
               "floating_ip_address ": "5.21.11.227", 
               "external_service_port": 0, 
               "description": "my dnat rule 01",
               "internal_service_port_range": "100-200",
               "external_service_port_range": "100-200"
           } 
       }
    4. Response to update the description of a rule
      { 
           "dnat_rule": { 
               "status": "ACTIVE", 
               "nat_gateway_id": "a78fb3eb-1654-4710-8742-3fc49d5f04f8", 
               "admin_state_up": true, 
               "port_id": "9a469561-daac-4c94-88f5-39366e5ea193", 
               "private_ip": "",
               "internal_service_port": 993, 
               "protocol": "tcp", 
               "tenant_id": "abc", 
               "floating_ip_id": "cf99c679-9f41-4dac-8513-9c9228e713e1",
               "created_at": "2017-11-15 15:44:42.595173", 
               "id": "79195d50-0271-41f1-bded-4c089b2502ff", 
               "floating_ip_address": "5.21.11.226", 
               "external_service_port": 242, 
               "description": "my dnat rule 01" 
           } 
       }

Status Code

See Status Codes.