Updated on 2022-01-25 GMT+08:00

Creating DNAT Rules in Batches

Function

This API is used to create DNAT rules in batches.

You can create DNAT rules in batches only when status of the NAT gateway is set to ACTIVE and admin_state_up of the NAT gateway administrator to True. Either port_id or private_ip is used each time. If you create a rule that applies to all port types, set internal_service_port to 0, external_service_port to 0, and protocol to ANY.

URI

POST /v2/{project_id}/dnat_rules/batch

Table 1 Parameter description

Parameter

Mandatory

Type

Description

project_id

Yes

String

Specifies the project ID.

Request

Table 2 lists the request parameters.

Table 2 Request parameters

Parameter

Mandatory

Type

Description

dnat_rules

Yes

Array of dnat_rule objects

Specifies the DNAT rule objects. For details, see Table 3.

Table 3 Description of the dnat_rule field

Parameter

Mandatory

Type

Description

nat_gateway_id

Yes

String

Specifies the NAT gateway ID.

port_id

No

String

Specifies the port ID of an ECS or a BMS. This parameter and private_ip are alternative.

private_ip

No

String

Specifies the private IP address of a user, for example, the IP address of a VPC for Direct Connect connection. This parameter and port_id are alternative.

internal_service_port

Yes

Integer

Specifies the port used by ECSs or BMSs to provide services for external systems.

floating_ip_id

Yes

String

Specifies the EIP ID.

external_service_port

Yes

Integer

Specifies the port for providing external services.

protocol

Yes

String

Specifies the protocol type. Currently, TCP, UDP, and ANY are supported.

The protocol number of TCP, UDP, and ANY are 6, 17, and 0, respectively.

description

No

String(255)

Provides supplementary information about the DNAT rule.

internal_service_port_range

No

String

Specifies the port range used by ECSs or BMSs to provide services for external systems.

  • The port range is the same as the value of external _service_port_range.
  • The value ranges from 1 to 65535.
  • Specify two port numbers separated by a single hyphen (-) and no blank spaces in the format, x-y, where x is lower than y.

external_service_port_range

No

String

Specifies the port range used by the floating IP address for providing external services.

  • The port range is the same as the value of internal _service_port_range.
  • The value ranges from 1 to 65535.
  • Specify two port numbers separated by a single hyphen (-) and no blank spaces in the format, x-y, where x is lower than y.

Response

Table 4 lists response parameters.

Table 4 Response parameter

Parameter

Type

Description

dnat_rules

Array(dnat_rule)

Specifies the DNAT rule objects. For details, see Table 5.

Table 5 Description of the dnat_rule field

Parameter

Type

Description

id

String

Specifies the DNAT rule ID.

tenant_id

String

Specifies the project ID.

nat_gateway_id

String

Specifies the NAT gateway ID.

port_id

String

Specifies the port ID of an ECS or a BMS.

private_ip

String

Specifies the private IP address of a user, for example, the IP address of a VPC for Direct Connect connection.

internal_service_port

Integer

Specifies the port used by ECSs or BMSs to provide services for external systems.

floating_ip_id

String

Specifies the EIP ID.

floating_ip_address

String

Specifies the EIP.

external_service_port

Integer

Specifies the port for providing external services.

protocol

String

Specifies the protocol type. Currently, TCP, UDP, and ANY are supported.

The protocol number of TCP, UDP, and ANY are 6, 17, and 0, respectively.

description

String(255)

Provides supplementary information about the DNAT rule.

status

String

  • Specifies the status of the DNAT rule.
  • For details about all its values, see Table 1.

admin_state_up

Boolean

  • Specifies the unfrozen or frozen state.
  • The value can be:
    • true: indicates the unfrozen state.
    • false: indicates the frozen state.

created_at

String

  • Specifies when the DNAT rule is created (UTC time). Its value rounds to 6 decimal places for seconds. The format is yyyy-mm-dd hh:mm:ss.

internal_service_port_range

String

Specifies the port range used by ECSs or BMSs to provide services for external systems.

  • The port range is the same as the value of external _service_port_range.
  • The value ranges from 1 to 65535.

external_service_port_range

String

Specifies the port range used by the floating IP address for providing external services.

  • The port range is the same as the value of internal _service_port_range.
  • The value ranges from 1 to 65535.

Example

  • Example request
    1. Creating rules in batches (The first is the rule when Port Type is set to Specific port, and the second is the rule when Port Type is set to All ports.)
      POST https://{Endpoint}/v2/d199ba7e0ba64899b2e81518104b1526/dnat_rules/batch
      { 
           "dnat_rules": [{ 
               "floating_ip_id": "bf99c679-9f41-4dac-8513-9c9228e713e1", 
               "nat_gateway_id": "cda3a125-2406-456c-a11f-598e10578541", 
               "port_id": "9a469561-daac-4c94-88f5-39366e5ea193", 
               "internal_service_port": 993, 
               "protocol": "tcp", 
               "external_service_port": 242 
           },
          { 
               "floating_ip_id": "cf99c679-9f41-4dac-8513-9c9228e713e1", 
               "nat_gateway_id": "dda3a125-2406-456c-a11f-598e10578541", 
               "private_ip": "192.168.1.100", 
               "internal_service_port": 0, 
               "protocol": "any", 
               "external_service_port": 0 
           }]
       }
  • Example response
    1. Response to the request for creating rules in batches
      { 
           "dnat_rules": [{ 
               "floating_ip_id": "bf99c679-9f41-4dac-8513-9c9228e713e1", 
               "status": "ACTIVE", 
               "nat_gateway_id": "cda3a125-2406-456c-a11f-598e10578541", 
               "admin_state_up": true, 
               "port_id": "9a469561-daac-4c94-88f5-39366e5ea193",
               "private_ip": "",  
               "internal_service_port": 993, 
               "protocol": "tcp", 
               "tenant_id": "abc", 
               "created_at": "2017-11-15 15:44:42.595173", 
               "id": "79195d50-0271-41f1-bded-4c089b2502ff", 
               "floating_ip_address": "5.21.11.226", 
               "external_service_port": 242,
               "description": "my dnat rule 01"
           },
      { 
               "floating_ip_id": "cf99c679-9f41-4dac-8513-9c9228e713e1", 
               "status": "ACTIVE", 
               "nat_gateway_id": "dda3a125-2406-456c-a11f-598e10578541", 
               "admin_state_up": true, 
               "port_ID": "",
               "private_ip": "192.168.1.100", 
               "internal_service_port": 0, 
               "protocol": "any", 
               "tenant_id": "abc", 
               "created_at": "2017-11-15 15:44:42.595173", 
               "id": "79195d50-0271-41f1-bded-4c089b2502ff", 
               "floating_ip_address": "5.21.11.227", 
               "external_service_port": 0,
               "description": "my dnat rule 01"
           }]
       }

Status Code

See Status Codes.