What Do I Do If a VPN Connection Fails to Be Established?
- Log in to the management console and choose Virtual Private Network > Enterprise – VPN Connections.
- In the VPN connection list, locate the target VPN connection, and choose More > Modify Policy Settings on the right to view IKE and IPsec policies of the VPN connection.
- Check the IKE and IPsec policies to see whether the negotiation modes and encryption algorithms at both ends of the VPN connection are the same.
If the IKE SA has been set up in phase 1 but no IPsec SA has been established in phase 2, the IPsec policies at both ends of the VPN connection may be inconsistent.
- Check whether the ACL rules are correct.
If the subnets of your on-premises data center are 192.168.3.0/24 and 192.168.4.0/24, and the VPC subnets are 192.168.1.0/24 and 192.168.2.0/24, configure the ACL rules for each on-premises subnet to allow the communication with the VPC subnets. The following provides an example of ACL configurations:
rule 1 permit ip source 192.168.3.0 0.0.0.255 destination 192.168.1.0 0.0.0.255 rule 2 permit ip source 192.168.3.0 0.0.0.255 destination 192.168.2.0 0.0.0.255 rule 3 permit ip source 192.168.4.0 0.0.0.255 destination 192.168.1.0 0.0.0.255 rule 4 permit ip source 192.168.4.0 0.0.0.255 destination 192.168.2.0 0.0.0.255
- Ping the two ends of the VPN connection from each other to check whether the VPN connection is normal.
Connection or Ping Failure FAQs
- Why Is a VPN Connection Always in Not Connected State After Its Configuration Is Complete?
- How Can I Prevent VPN Disconnections?
- How Do I Quickly Restore an Interrupted IPsec VPN Connection?
- What Will Happen If Traffic Exceeds the Bandwidth of a VPN Gateway?
- Is an IPsec VPN Connection Automatically Established?
- Why Cannot ECSs at the Two Ends of a Normal Cross-Region VPN Connection Ping Each Other?
- Why Cannot Subnets at the Two Ends of a Normal VPN Connection Access Each Other?
- What Do I Do If a VPN Connection Is Interrupted and a Message Indicating Data Flow Mismatch Is Displayed?
- What Do I Do If a VPN Connection Is Interrupted and a Message Indicating DPD Timeout Is Displayed?
- Why Is a VPN Connection in Not Connected State on the Management Console When It Is Already Available?
- Will I Be Notified If a VPN Connection Is Interrupted?
- What Do I Do If a VPN Connection Fails to Be Established?
- What Should I Do If I Cannot Access the ECSs on the Cloud from My On-premises Data Center or LAN After the VPN Connection Has Been Set Up?
- Why Is the State of a Successfully Created VPN Connection Displayed as Not Connected?
- Do Huawei Cloud VPNs Have the DPD Function Enabled?
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbotmore