Updated on 2022-12-08 GMT+08:00

Configuring the DP300

To activate the DP300, log in to its web interface and set TR069 parameters.

  1. Log in to the web interface of the hard terminal.

    In the address box, enter the terminal IP address, username, and password, and click Log In.

  2. Choose System Settings > Network > IP and configure the DNS server.

    The DNS server is subject to the actual DNS server on your network.

  3. Choose System Settings > Network > TR069, set TR069 to Enable, enter the ACS username, password, and address, and click Save.

    Table 1 Parameters

    Parameter

    Description

    ACS user name

    Indicates the TR069 account that the system sends by SMS or email after the administrator adds the hard terminal.

    ACS password

    Indicates the TR069 password sent by the system by SMS or email after the administrator adds the hard terminal.

    ACS server IP address

    Enter https://device-ap-southeast-1.meeting.huaweicloud.com:8444/tr069/services/acs.

  4. Choose Maintenance > System Status and check whether the system status is normal. If ACS is connected and the terminal has been registered with the SIP server, the activation is successful.