OS Monitoring Metrics Supported by ECSs with the Agent Installed

cpu_usage

(Agent) CPU Usage

CPU usage of the monitored object

Unit: percent

• Linux: Check metric value changes in file /proc/stat in a collection period. Run the top command to check the %Cpu(s) value.
• Windows: Obtain the metric value using the Windows API GetSystemTimes.

0-100

ECS

1 minute

cpu_usage_idle

(Agent) Idle CPU Usage

Percentage of time that CPU is idle

Unit: percent

• Linux: Check metric value changes in file /proc/stat in a collection period.
• Windows: Obtain the metric value using the Windows API GetSystemTimes.

0-100

ECS

1 minute

cpu_usage_user

(Agent) User Space CPU Usage

Percentage of time that the CPU is used by user space

Unit: percent

• Linux: Check metric value changes in file /proc/stat in a collection period. Run the top command to check the %Cpu(s) us value.
• Windows: Obtain the metric value using the Windows API GetSystemTimes.

0-100

ECS

1 minute

cpu_usage_system

(Agent) Kernel Space CPU Usage

Percentage of time that the CPU is used by kernel space

Unit: percent

• Linux: Check metric value changes in file /proc/stat in a collection period. Run the top command to check the %Cpu(s) sy value.
• Windows: Obtain the metric value using the Windows API GetSystemTimes.

0-100

ECS

1 minute

cpu_usage_other

(Agent) Other Process CPU Usage

Percentage of time that the CPU is used by other processes

Unit: percent

• Linux: Other Process CPU Usage = 1- Idle CPU Usage - Kernel Space CPU Usage - User Space CPU Usage
• Windows: Other Process CPU Usage = 1- Idle CPU Usage - Kernel Space CPU Usage - User Space CPU Usage

0-100

ECS

1 minute

cpu_usage_nice

(Agent) Nice Process CPU Usage

Percentage of time that the CPU is in user mode with low-priority processes which can easily be interrupted by higher-priority processes

Unit: percent

• Linux: Check metric value changes in file /proc/stat in a collection period. Run the top command to check the %Cpu(s) ni value.
• Windows is not supported currently.

0-100

ECS

1 minute

cpu_usage_iowait

(Agent) iowait Process CPU Usage

Percentage of time that the CPU is waiting for I/O operations to complete

Unit: percent

• Linux: Check metric value changes in file /proc/stat in a collection period. Run the top command to check the %Cpu(s) wa value.
• Windows is not supported currently.

0-100

ECS

1 minute

cpu_usage_irq

(Agent) CPU Interrupt Time

Percentage of time that the CPU is servicing interrupts

Unit: percent

• Linux: Check metric value changes in file /proc/stat in a collection period. Run the top command to check the %Cpu(s) hi value.
• Windows is not supported currently.

0-100

ECS

1 minute

cpu_usage_softirq

(Agent) CPU Software Interrupt Time

Percentage of time that the CPU is servicing software interrupts

Unit: percent

• Linux: Check metric value changes in file /proc/stat in a collection period. Run the top command to check the %Cpu(s) si value.
• Windows is not supported currently.

0-100

ECS

1 minute

load_average1

(Agent) 1-Minute Load Average

CPU load averaged from the last 1 minute

Linux: Obtain the metric value from the number of logic CPUs in load1/ in file /proc/loadavg. Run the top command to check the load1 value.

≥ 0

ECS

1 minute

load_average5

(Agent) 5-Minute Load Average

CPU load averaged from the last 5 minutes

Linux: Obtain the metric value from the number of logic CPUs in load5/ in file /proc/loadavg. Run the top command to check the load5 value.

≥ 0

ECS

1 minute

load_average15

(Agent) 15-Minute Load Average

CPU load averaged from the last 15 minutes

Linux: Obtain the metric value from the number of logic CPUs in load15/ in file /proc/loadavg. Run the top command to check the load15 value.

≥ 0

ECS

1 minute

mem_available

(Agent) Available Memory

Amount of memory that is available and can be given instantly to processes

Unit: GB

• Linux: Obtain the metric value from /proc/meminfo.
  • If MemAvailable is displayed in /proc/meminfo, obtain the value.
  • If MemAvailable is not displayed in /proc/meminfo, MemAvailable = MemFree + Buffers+Cached
• Windows: The metric value is calculated by available memory minuses used memory. The value is obtained by calling the Windows API GlobalMemoryStatusEx.

≥ 0

ECS

1 minute

mem_usedPercent

(Agent) Memory Usage

Memory usage of the monitored object

Unit: percent

• Linux: Obtain the metric value from the /proc/meminfo file: (MemTotal - MemAvailable)/MemTotal
  • If MemAvailable is displayed in /proc/meminfo, MemUsedPercent = (MemTotal-MemAvailable)/MemTotal
  • If MemAvailable is not displayed in /proc/meminfo, MemUsedPercent = (MemTotal – MemFree – Buffers – Cached)/MemTotal
• Windows: The calculation formula is as follows: Used memory size/Total memory size*100%.

0-100

ECS

1 minute

mem_free

(Agent) Idle Memory

Amount of memory that is not being used

Unit: GB

• Linux: Obtain the metric value from /proc/meminfo.
• Windows is not supported currently.

≥ 0

ECS

1 minute

mem_buffers

(Agent) Buffer

Amount of memory that is being used for buffers

Unit: GB

• Linux: Obtain the metric value from /proc/meminfo. Run the top command to check the KiB Mem:buffers value.
• Windows is not supported currently.

≥ 0

ECS

1 minute

mem_cached

(Agent) Cache

Amount of memory that is being used for file caches

Unit: GB

• Linux: Obtain the metric value from /proc/meminfo. Run the top command to check the KiB Swap:cached Mem value.
• Windows is not supported currently.

≥ 0

ECS

1 minute

total_open_files

(Agent) Total File Handles

Total handles used by all processes

Unit: count

• Linux: Use the /proc/{pid}/fd file to summarize the handles used by all processes.
• Windows is not supported currently.

≥0

ECS

1 minute

disk_free

(Agent) Available Disk Space

Free space on the disks

Unit: GB

• Linux: Run the df -h command to check the value in the Avail column. The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).
• Windows: Use the WMI interface to call GetDiskFreeSpaceExW API to obtain disk space data. The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

≥ 0

ECS - Mount point

1 minute

disk_total

(Agent) Disk Storage Capacity

Total space on the disks, including used and free

Unit: GB

• Linux: Run the df -h command to check the value in the Size column.

  The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

• Windows: Use the WMI interface to call GetDiskFreeSpaceExW API to obtain disk space data. The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

≥ 0

ECS - Mount point

1 minute

disk_used

(Agent) Used Disk Space

Used space on the disks

Unit: GB

• Linux: Run the df -h command to check the value in the Used column. The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).
• Windows: Use the WMI interface to call GetDiskFreeSpaceExW API to obtain disk space data. The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

≥ 0

ECS - Mount point

1 minute

disk_usedPercent

(Agent) Disk Usage

Percentage of total disk space that is used, which is calculated as follows: Disk Usage = Used Disk Space/Disk Storage Capacity

Unit: percent

• Linux: It is calculated as follows: Used/Size. The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).
• Windows: Use the WMI interface to call GetDiskFreeSpaceExW API to obtain disk space data. The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

0-100

ECS - Mount point

1 minute

disk_agt_read_bytes_rate

(Agent) Disks Read Rate

Number of bytes read from the monitored disk per second

Unit: byte/s

• Linux:

  The disk read rate is calculated based on the data changes in the sixth column of the corresponding device in file /proc/diskstats in a collection period.

  The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

• Windows:
  • Use Win32_PerfFormattedData_PerfDisk_LogicalDisk object in the WMI to obtain disk I/O data.
  • The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).
  • When the CPU usage is high, monitoring data obtaining timeout may occur and result in the failure of obtaining monitoring data.

≥ 0 bytes/s

• ECS - Disk
• ECS - Mount point

1 minute

disk_agt_read_requests_rate

(Agent) Disks Read Requests

Number of read requests sent to the monitored disk per second

Unit: request/s

• Linux:

  The disk read requests are calculated based on the data changes in the fourth column of the corresponding device in file /proc/diskstats in a collection period.

  The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

• Windows:
  • Use Win32_PerfFormattedData_PerfDisk_LogicalDisk object in the WMI to obtain disk I/O data.
  • The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).
  • When the CPU usage is high, monitoring data obtaining timeout may occur and result in the failure of obtaining monitoring data.

≥ 0 requests/s

• ECS - Disk
• ECS - Mount point

1 minute

disk_agt_write_bytes_rate

(Agent) Disks Write Rate

Number of bytes written to the monitored disk per second

Unit: byte/s

• Linux:

  The disk write rate is calculated based on the data changes in the tenth column of the corresponding device in file /proc/diskstats in a collection period.

  The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

• Windows:
  • Use Win32_PerfFormattedData_PerfDisk_LogicalDisk object in the WMI to obtain disk I/O data.
  • The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).
  • When the CPU usage is high, monitoring data obtaining timeout may occur and result in the failure of obtaining monitoring data.

≥ 0 bytes/s

• ECS - Disk
• ECS - Mount point

1 minute

disk_agt_write_requests_rate

(Agent) Disks Write Requests

Number of write requests sent to the monitored disk per second

Unit: request/s

• Linux:

  The disk write requests are calculated based on the data changes in the eighth column of the corresponding device in file /proc/diskstats in a collection period.

  The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

• Windows:
  • Use Win32_PerfFormattedData_PerfDisk_LogicalDisk object in the WMI to obtain disk I/O data.
  • The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).
  • When the CPU usage is high, monitoring data obtaining timeout may occur and result in the failure of obtaining monitoring data.

≥ 0 requests/s

• ECS - Disk
• ECS - Mount point

1 minute

disk_readTime

(Agent) Average Read Request Time

Average amount of time that read requests have waited on the disks

Unit: ms/count

• Linux:

  The average read request time is calculated based on the data changes in the seventh column of the corresponding device in file /proc/diskstats in a collection period.

  The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

• Windows is not supported currently.

≥ 0 ms/Count

• ECS - Disk
• ECS - Mount point

1 minute

disk_writeTime

(Agent) Average Write Request Time

Average amount of time that write requests have waited on the disks

Unit: ms/count

• Linux:

  The average write request time is calculated based on the data changes in the eleventh column of the corresponding device in file /proc/diskstats in a collection period.

  The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

• Windows is not supported currently.

≥ 0 ms/Count

• ECS - Disk
• ECS - Mount point

1 minute

disk_ioUtils

(Agent) Disk I/O Usage

Percentage of the time that the disk has had I/O requests queued to the total disk operation time

Unit: percent

• Linux:

  The disk I/O usage is calculated based on the data changes in the thirteenth column of the corresponding device in file /proc/diskstats in a collection period.

  The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

• Windows is not supported currently.

0-100

• ECS - Disk
• ECS - Mount point

1 minute

disk_queue_length

(Agent) Disk Queue Length

Average number of read or write requests queued up for completion for the monitored disk in the monitoring period

Unit: count

• Linux:

  The average disk queue length is calculated based on the data changes in the fourteenth column of the corresponding device in file /proc/diskstats in a collection period.

  The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

• Windows is not supported currently.

≥ 0

• ECS - Disk
• ECS - Mount point

1 minute

disk_write_bytes_per_operation

(Agent) Average Disk Write Size

Average number of bytes in an I/O write for the monitored disk in the monitoring period

Unit: byte/op

• Linux:

  The average disk write size is calculated based on the data changes in the tenth column of the corresponding device to divide that of the eighth column in file /proc/diskstats in a collection period.

  The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

• Windows is not supported currently.

≥ 0 bytes/op

• ECS - Disk
• ECS - Mount point

1 minute

disk_read_bytes_per_operation

(Agent) Average Disk Read Size

Average number of bytes in an I/O read for the monitored disk in the monitoring period

Unit: byte/op

• Linux:

  The average disk read size is calculated based on the data changes in the sixth column of the corresponding device to divide that of the fourth column in file /proc/diskstats in a collection period.

  The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

• Windows is not supported currently.

≥ 0 bytes/op

• ECS - Disk
• ECS - Mount point

1 minute

disk_io_svctm

(Agent) Disk I/O Service Time

Average time in an I/O read or write for the monitored disk in the monitoring period

Unit: ms/op

• Linux:

  The average disk I/O service time is calculated based on the data changes in the thirteenth column of the corresponding device to divide the sum of data changes in the fourth and eighth columns in file /proc/diskstats in a collection period.

  The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

• Windows is not supported currently.

≥ 0

• ECS - Disk
• ECS - Mount point

1 minute

disk_device_used_percent

Block Device Usage

Percentage of the physical disk usage of the monitored object. Calculation formula: Used storage space of all mounted disk partitions/Total disk storage space

• Collection method for Linux ECSs: Obtain the disk usage of each mount point, calculate the total disk storage space based on the disk sector size and the number of sectors, and then you can calculate the used storage space in total.
• Windows ECSs do not support this metric.

0-100%

ECS - Disk

1 minute

disk_fs_rwstate

(Agent) File System Read/Write Status

Read and write status of the mounted file system of the monitored object Possible values are 0 (read and write) and 1 (read only).

Linux: Check file system information in the fourth column in file /proc/mounts.

• 0: readable and writable
• 1: read-only

ECS - Mount point

1

disk_inodesTotal

(Agent) Disk inode Total

Total number of index nodes on the disk

Linux: Run the df -i command to check the value in the Inodes column. The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

≥ 0

ECS - Mount point

1 minute

disk_inodesUsed

(Agent) Total inode Used

Number of used index nodes on the disk

Linux: Run the df -i command to check the value in the IUsed column. The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

≥ 0

ECS - Mount point

1 minute

disk_inodesUsedPercent

(Agent) Percentage of Total inode Used

Number of used index nodes on the disk

Unit: percent

Linux: Run the df -i command to check the value in the IUse% column. The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), dots (.), and swung dashes (~).

0-100

ECS - Mount point

1 minute

net_bitRecv

(Agent) Outbound Bandwidth

Number of bits sent by this NIC per second

Unit: bit/s

• Linux: Check metric value changes in file /proc/net/dev in a collection period.
• Windows: Use the MibIfRow object in the WMI to obtain network metric data.

≥ 0 bit/s

ECS

1 minute

net_bitSent

(Agent) Inbound Bandwidth

Number of bits received by this NIC per second

Unit: bit/s

• Linux: Check metric value changes in file /proc/net/dev in a collection period.
• Windows: Use the MibIfRow object in the WMI to obtain network metric data.

≥ 0 bit/s

ECS

1 minute

net_packetRecv

(Agent) NIC Packet Receive Rate

Number of packets received by this NIC per second

Unit: count/s

• Linux: Check metric value changes in file /proc/net/dev in a collection period.
• Windows: Use the MibIfRow object in the WMI to obtain network metric data.

≥ 0 Counts/s

ECS

1 minute

net_packetSent

(Agent) NIC Packet Send Rate

Number of packets sent by this NIC per second

Unit: count/s

• Linux: Check metric value changes in file /proc/net/dev in a collection period.
• Windows: Use the MibIfRow object in the WMI to obtain network metric data.

≥ 0 Counts/s

ECS

1 minute

net_errin

(Agent) Receive Error Rate

Percentage of receive errors detected by this NIC per second

Unit: percent

• Linux: Check metric value changes in file /proc/net/dev in a collection period.
• Windows is not supported currently.

0-100

ECS

1 minute

net_errout

(Agent) Transmit Error Rate

Percentage of transmit errors detected by this NIC per second

Unit: percent

• Linux: Check metric value changes in file /proc/net/dev in a collection period.
• Windows is not supported currently.

0-100

ECS

1 minute

net_dropin

(Agent) Received Packet Drop Rate

Percentage of packets received by this NIC which were dropped per second

Unit: percent

• Linux: Check metric value changes in file /proc/net/dev in a collection period.
• Windows is not supported currently.

0-100

ECS

1 minute

net_dropout

(Agent) Transmitted Packet Drop Rate

Percentage of packets transmitted by this NIC which were dropped per second

Unit: percent

• Linux: Check metric value changes in file /proc/net/dev in a collection period.
• Windows is not supported currently.

0-100

ECS

1 minute

ntp_offset

(Agent) NTP Offset

NTP offset of the monitored object

Unit: ms

Collection method for Linux ECSs: Run chronyc sources -v to obtain the offset.

≥ 0 ms

ECS

1 minute

net_tcp_total

(Agent) TCP TOTAL

Total number of TCP connections in all states

Unit: count

• Linux: Obtain TCP connections in all states from the /proc/net/tcp file, and then collect the number of connections in each state.
• Windows: Obtain the metric value using WindowsAPI GetTcpTable2.

≥ 0

ECS

1 minute

net_tcp_established

(Agent) TCP ESTABLISHED

Number of TCP connections in ESTABLISHED state

Unit: count

• Linux: Obtain TCP connections in all states from the /proc/net/tcp file, and then collect the number of connections in each state.
• Windows: Obtain the metric value using WindowsAPI GetTcpTable2.

≥ 0

ECS

1 minute

net_tcp_sys_sent

(Agent) TCP SYS_SENT

Number of TCP connections that are being requested by the client

Unit: count

• Linux: Obtain TCP connections in all states from the /proc/net/tcp file, and then collect the number of connections in each state.
• Windows: Obtain the metric value using WindowsAPI GetTcpTable2.

≥ 0

ECS

1 minute

net_tcp_sys_recv

(Agent) TCP SYS_RECV

Number of pending TCP connections received by the server

Unit: count

• Linux: Obtain TCP connections in all states from the /proc/net/tcp file, and then collect the number of connections in each state.
• Windows: Obtain the metric value using WindowsAPI GetTcpTable2.

≥ 0

ECS

1 minute

net_tcp_fin_wait1

(Agent) TCP FIN_WAIT1

Number of TCP connections waiting for ACK packets when the connections are being actively closed by the client

Unit: count

• Linux: Obtain TCP connections in all states from the /proc/net/tcp file, and then collect the number of connections in each state.
• Windows: Obtain the metric value using WindowsAPI GetTcpTable2.

≥ 0

ECS

1 minute

net_tcp_fin_wait2

(Agent) TCP FIN_WAIT2

Number of TCP connections in the FIN_WAIT2 state

Unit: count

• Linux: Obtain TCP connections in all states from the /proc/net/tcp file, and then collect the number of connections in each state.
• Windows: Obtain the metric value using WindowsAPI GetTcpTable2.

≥ 0

ECS

1 minute

net_tcp_time_wait

(Agent) TCP TIME_WAIT

Number of TCP connections in TIME_WAIT state

Unit: count

• Linux: Obtain TCP connections in all states from the /proc/net/tcp file, and then collect the number of connections in each state.
• Windows: Obtain the metric value using WindowsAPI GetTcpTable2.

≥ 0

ECS

1 minute

net_tcp_close

(Agent) TCP CLOSE

Number of closed TCP connections

Unit: count

• Linux: Obtain TCP connections in all states from the /proc/net/tcp file, and then collect the number of connections in each state.
• Windows: Obtain the metric value using WindowsAPI GetTcpTable2.

≥ 0

ECS

1 minute

net_tcp_close_wait

(Agent) TCP CLOSE_WAIT

Number of TCP connections in CLOSE_WAIT TCP state

Unit: count

• Linux: Obtain TCP connections in all states from the /proc/net/tcp file, and then collect the number of connections in each state.
• Windows: Obtain the metric value using WindowsAPI GetTcpTable2.

≥ 0

ECS

1 minute

net_tcp_last_ack

(Agent) TCP LAST_ACK

Number of TCP connections waiting for ACK packets when the connections are being passively closed by the client

Unit: count

• Linux: Obtain TCP connections in all states from the /proc/net/tcp file, and then collect the number of connections in each state.
• Windows: Obtain the metric value using WindowsAPI GetTcpTable2.

≥ 0

ECS

1 minute

net_tcp_listen

(Agent) TCP LISTEN

Number of TCP connections in the LISTEN state

Unit: count

• Linux: Obtain TCP connections in all states from the /proc/net/tcp file, and then collect the number of connections in each state.
• Windows: Obtain the metric value using WindowsAPI GetTcpTable2.

≥ 0

ECS

1 minute

net_tcp_closing

(Agent) TCP CLOSING

Number of TCP connections to be automatically closed by the server and the client at the same time

Unit: count

• Linux: Obtain TCP connections in all states from the /proc/net/tcp file, and then collect the number of connections in each state.
• Windows: Obtain the metric value using WindowsAPI GetTcpTable2.

≥ 0

ECS

1 minute

net_tcp_retrans

(Agent) TCP Retransmission Rate

Percentage of packets that are resent

Unit: percent

• Linux: Obtain the metric value from the /proc/net/snmp file. The value is the ratio of the number of sent packets to the number of retransmitted packages in a collection period.
• Windows: Obtain the metric value using WindowsAPI GetTcpStatistics.

0-100%

ECS

1 minute

gpu_status

GPU Health Status

Overall measurement of the GPU health

Unit: none

• Linux: Obtain the metric value using the libnvidia-ml.so.1 library file of the graphics card.
• Windows: Obtain the metric value using the nvml.dll library of the graphics card.

• 0: The GPU is healthy.
• 1: The GPU is subhealthy.
• 2: The GPU is faulty.

• ECS
• ECS - GPU

1 minute

gpu_usage_encoder

Encoding Usage

Encoding capability usage on the GPU

Unit: percent

• Linux: Obtain the metric value using the libnvidia-ml.so.1 library file of the graphics card.
• Windows: Obtain the metric value using the nvml.dll library of the graphics card.

0-100%

• ECS
• ECS - GPU

1 minute

gpu_usage_decoder

Decoding Usage

Decoding capability usage on the GPU

Unit: percent

• Linux: Obtain the metric value using the libnvidia-ml.so.1 library file of the graphics card.
• Windows: Obtain the metric value using the nvml.dll library of the graphics card.

0-100%

• ECS
• ECS - GPU

1 minute

gpu_volatile_correctable

Volatile Correctable ECC Errors

Number of correctable ECC errors since the GPU is reset. The value is reset to 0 each time the GPU is reset.

Unit: count

• Linux: Obtain the metric value using the libnvidia-ml.so.1 library file of the graphics card.
• Windows: Obtain the metric value using the nvml.dll library of the graphics card.

≥ 0

• ECS
• ECS - GPU

1 minute

gpu_volatile_uncorrectable

Volatile Uncorrectable ECC Errors

Number of uncorrectable ECC errors since the GPU is reset. The value is reset to 0 each time the GPU is reset.

Unit: count

• Linux: Obtain the metric value using the libnvidia-ml.so.1 library file of the graphics card.
• Windows: Obtain the metric value using the nvml.dll library of the graphics card.

≥ 0

• ECS
• ECS - GPU

1 minute

gpu_aggregate_correctable

Aggregate Correctable ECC Errors

Aggregate correctable ECC errors on the GPU

Unit: count

• Linux: Obtain the metric value using the libnvidia-ml.so.1 library file of the graphics card.
• Windows: Obtain the metric value using the nvml.dll library of the graphics card.

≥ 0

• ECS
• ECS - GPU

1 minute

gpu_aggregate_uncorrectable

Aggregate Uncorrectable ECC Errors

Aggregate uncorrectable ECC Errors on the GPU

Unit: count

• Linux: Obtain the metric value using the libnvidia-ml.so.1 library file of the graphics card.
• Windows: Obtain the metric value using the nvml.dll library of the graphics card.

≥ 0

• ECS
• ECS - GPU

1 minute

gpu_retired_page_single_bit

Retired Page Single Bit Errors

Number of retired page single bit errors, which indicates the number of single-bit pages blocked by the graphics card

Unit: count

• Linux: Obtain the metric value using the libnvidia-ml.so.1 library file of the graphics card.
• Windows: Obtain the metric value using the nvml.dll library of the graphics card.

≥ 0

• ECS
• ECS - GPU

1 minute

gpu_retired_page_double_bit

Retired Page Double Bit Errors

Number of retired page double bit errors, which indicates the number of double-bit pages blocked by the graphics card

Unit: count

• Linux: Obtain the metric value using the libnvidia-ml.so.1 library file of the graphics card.
• Windows: Obtain the metric value using the nvml.dll library of the graphics card.

≥ 0

• ECS
• ECS - GPU

1 minute

gpu_performance_state

(Agent) Performance Status

GPU performance of the monitored object

Unit: none

• Linux: Obtain the metric value using the libnvidia-ml.so.1 library file of the graphics card.
• Windows: Obtain the metric value using the nvml.dll library of the graphics card.

P0-P15, P32

• P0: indicates the maximum performance status.
• P15: indicates the minimum performance status.
• P32: indicates the unknown performance status.

ECS - GPU

1 minute

gpu_usage_mem

(Agent) GPU Memory Usage

GPU memory usage of the monitored object

Unit: percent

• Linux: Obtain the metric value using the libnvidia-ml.so.1 library file of the graphics card.
• Windows: Obtain the metric value using the nvml.dll library of the graphics card.

0-100

ECS - GPU

1 minute

gpu_usage_gpu

(Agent) GPU Usage

GPU usage of the monitored object

Unit: percent

• Linux: Obtain the metric value using the libnvidia-ml.so.1 library file of the graphics card.
• Windows: Obtain the metric value using the nvml.dll library of the graphics card.

0-100

ECS - GPU

1 minute

ECS

instance_id

Specifies the ECS ID.

ECS - Disk

disk

Specifies the disks attached to an ECS.

ECS - Mount point

mount_point

Specifies the mount point of a disk.

ECS - GPU

gpu

Specifies the graphics card of an ECS.