Updated on 2024-04-11 GMT+08:00

Step 1: Create a DB Instance

Scenarios

This section describes how to create a DB instance on the management console.

RDS allows you to tailor your computing resources and storage space to your business needs.

Procedure

  1. Log in to the management console.
  2. Click in the upper left corner and select a region and a project.
  3. Click Service List. Under Database, click Relational Database Service. The RDS console is displayed.
  4. On the Instance Management page, click Create DB Instance.
  5. On the displayed page, configure information about your DB instance. Then, click Create Now.

    • Basic information
      Table 1 Basic information

      Parameter

      Description

      Region

      Region where the tenant is located. You can select a region from the drop-down list box.

      NOTE:

      Products in different regions cannot communicate with each other through a private network. After a DB instance is created, the region cannot be changed. Therefore, exercise caution when selecting a region.

      DB Instance Name

      Must start with a letter and consist of 4 to 64 characters. Only letters (case-sensitive), digits, hyphens (-), and underscores (_) are allowed.

      DB Engine

      Set to MySQL.

      DB Engine Version

      For details, see DB Engines and Versions.

      Different DB engine versions are supported in different regions.

      You are advised to select the latest available version because it is more stable, reliable, and secure.

      DB Instance Type

      • Primary/Standby: uses an HA architecture with a primary DB instance and a synchronous standby DB instance. It is suitable for production databases of large- and medium-sized enterprises in Internet, Internet of Things (IoT), retail e-commerce sales, logistics, gaming, and other sectors. The standby DB instance improves instance reliability and is invisible to you after being created.

        An AZ is a physical region where resources use independent power supply and networks. AZs are physically isolated but interconnected through an internal network.

        You can deploy primary and standby DB instances in a single AZ or across AZs to achieve failover and high availability.

      • Single: uses a single-node architecture, which is more cost-effective than primary/standby DB instances. It is suitable for development and testing of microsites, and small and medium enterprises, or for learning about RDS.

      Time Zone

      You need to select a time zone for your instance based on the region hosting your instance. You can select a time zone during instance creation and change it after the instance is created.

    • DB instance specifications
      Table 2 Instance specifications

      Parameter

      Description

      Instance Class

      Refers to the CPU and memory of a DB instance. Different instance classes have different numbers of database connections and different maximum IOPS.

      For details about instance classes, see section DB Instance Classes.

      After a DB instance is created, you can change its instance class. For details, see section Changing a DB Instance Class.

      Storage Type

      Determines the DB instance read/write speed. The higher the maximum throughput is, the higher the DB instance read/write speed can be.

      • Common I/O: uses the SATA disk type, with a maximum throughput of 90 MB/s.
      • Ultra-high I/O: uses the SSD disk type that supports a maximum throughput of 350 MB/s.

      Storage Space (GB)

      Contains the file system overhead required for inode, reserved block, and database operation.

      After a DB instance is created, you can scale up its storage space. For details, see section Scaling up Storage Space.

      NOTE:
      • Storage space can range in size from 40 GB to 4,000 GB and can be scaled up only by a multiple of 10 GB.
    • Network and database configuration
      Table 3 Network

      Parameter

      Description

      VPC

      A dedicated virtual network in which your RDS DB instances are located. A VPC can isolate networks for different workloads. You can select an existing VPC or create a VPC. For details on how to create a VPC, see the "Creating a VPC" section in the Virtual Private Cloud User Guide.

      If no VPC is available, RDS allocates a VPC to you by default.

      NOTICE:

      After the DB instance is created, the VPC cannot be changed.

      Subnet

      Improves network security by providing dedicated network resources that are logically isolated from other networks. Subnets take effect only within an AZ. The Dynamic Host Configuration Protocol (DHCP) function is enabled by default for subnets in which you plan to create RDS DB instances and cannot be disabled.

      A floating IP address is automatically assigned when you create a DB instance. You can also enter an unused floating IP address in the subnet CIDR block. After the DB instance is created, you can change the floating IP address.

      Security Group

      Enhances security by controlling access to RDS from other services. You need to add inbound rules to a security group so that you can connect to your DB instance.

      If no security group is available or has been created, RDS allocates a security group to you by default.

      Table 4 Database configuration

      Parameter

      Description

      Administrator

      The default login name for the database is root.

      Administrator Password

      Must consist of 8 to 32 characters and contain at least three types of the following characters: uppercase letters, lowercase letters, digits, and special characters (~!@#$%^*-_=+?,). Enter a strong password and periodically change it for security reasons.

      Keep this password secure. The system cannot retrieve it.

      After a DB instance is created, you can reset this password. For details, see section Resetting the Administrator Password.

      Confirm Password

      Must be the same as Administrator Password.

      Parameter Template

      Contains engine configuration values that can be applied to one or more DB instances. If you intend to create primary/standby DB instances, they use the same parameter template.

      NOTICE:

      If you use a custom parameter template when creating a DB instance, the following specification-related parameters in the custom template are not delivered. Instead, the default values are used.

      • back_log
      • innodb_io_capacity_max
      • max_connections
      • innodb_io_capacity
      • innodb_buffer_pool_size
      • innodb_buffer_pool_instances

      You can modify the instance parameters as required after the DB instance is created. For details, see section Modifying Parameters.

    • Batch creation
      Table 5 Batch creation

      Parameter

      Description

      Quantity

      RDS supports DB instance creation in batches. If you choose to create primary/standby DB instances and set Quantity to 1, a primary DB instance and a standby DB instance will be created synchronously.

      If you create multiple DB instances at a time, they will be named with four digits appended to the DB instance name. For example, if you enter instance, the first instance will be named instance-0001, the second instance-0002, and so on.

    The performance of your DB instance depends on its configurations. Hardware configuration items include the instance specifications, storage type, and storage space.

  6. Confirm the specifications.

    • If you need to modify your settings, click Previous.
    • If you do not need to modify your settings, click Submit.

  7. To view and manage your DB instance, go to the Instance Management page.

    • When your DB instance is being created, the status is Creating. The status changes to Available after the instance is created. To view the detailed progress and result of the creation, go to the Task Center page.
    • The automated backup policy is enabled by default. You can change it after the DB instance is created. An automated full backup is immediately triggered once your DB instance is created.
    • The default database port is 3306. You can change it after a DB instance is created.

      For details, see section Changing a Database Port.