TLS Security Policy

Scenarios

When you add HTTPS listeners, you can select appropriate security policies to improve security. A security policy is a combination of TLS protocols of different versions and supported cipher suites.

Adding a Security Policy

1. Log in to the management console.
2. In the upper left corner of the page, click and select the desired region and project.
3. Hover on in the upper left corner to display Service List and choose Network > Elastic Load Balance.
4. Locate the load balancer and click its name.
5. Under Listeners, click Add Listener.
6. In the Add Listener dialog box, set Frontend Protocol to HTTPS.
7. Expand Advanced Settings and select a security policy.
   Table 1 shows the default security policies.

   Table 1 Default security policies

   Security Policy	Description	TLS Versions	Cipher Suites
   TLS-1-0	TLS 1.0, TLS 1.1, and TLS 1.2 and supported cipher suites (high compatibility and moderate security)	TLS 1.2 TLS 1.1 TLS 1.0	ECDHE-RSA-AES256-GCM-SHA384 ECDHE-RSA-AES128-GCM-SHA256 ECDHE-ECDSA-AES256-GCM-SHA384 ECDHE-ECDSA-AES128-GCM-SHA256 AES128-GCM-SHA256 AES256-GCM-SHA384 ECDHE-ECDSA-AES128-SHA256 ECDHE-RSA-AES128-SHA256 AES128-SHA256 AES256-SHA256 ECDHE-ECDSA-AES256-SHA384 ECDHE-RSA-AES256-SHA384 ECDHE-ECDSA-AES128-SHA ECDHE-RSA-AES128-SHA ECDHE-RSA-AES256-SHA ECDHE-ECDSA-AES256-SHA AES128-SHA AES256-SHA
   TLS-1-1	TLS 1.1 and TLS 1.2 and supported cipher suites (moderate compatibility and moderate security)	TLS 1.2 TLS 1.1
   TLS-1-2	TLS 1.2 and supported cipher suites (moderate compatibility and high security)	TLS 1.2
   TLS-1-2-Strict	Strict TLS 1.2 and supported cipher suites (low compatibility and ultra-high security)	TLS 1.2	ECDHE-RSA-AES256-GCM-SHA384 ECDHE-RSA-AES128-GCM-SHA256 ECDHE-ECDSA-AES256-GCM-SHA384 ECDHE-ECDSA-AES128-GCM-SHA256 AES128-GCM-SHA256 AES256-GCM-SHA384 ECDHE-ECDSA-AES128-SHA256 ECDHE-RSA-AES128-SHA256 AES128-SHA256 AES256-SHA256 ECDHE-ECDSA-AES256-SHA384 ECDHE-RSA-AES256-SHA384
   TLS-1-0-WITH-1-3	TLS 1.0 and later, and supported cipher suites (ultra-high compatibility and low security)	TLS 1.3 TLS 1.2 TLS 1.1 TLS 1.0	ECDHE-RSA-AES256-GCM-SHA384 ECDHE-RSA-AES128-GCM-SHA256 ECDHE-ECDSA-AES256-GCM-SHA384 ECDHE-ECDSA-AES128-GCM-SHA256 AES128-GCM-SHA256 AES256-GCM-SHA384 ECDHE-ECDSA-AES128-SHA256 ECDHE-RSA-AES128-SHA256 AES128-SHA256 AES256-SHA256 ECDHE-ECDSA-AES256-SHA384 ECDHE-RSA-AES256-SHA384 ECDHE-ECDSA-AES128-SHA ECDHE-RSA-AES128-SHA ECDHE-RSA-AES256-SHA ECDHE-ECDSA-AES256-SHA AES128-SHA AES256-SHA TLS_AES_128_GCM_SHA256 TLS_AES_256_GCM_SHA384 TLS_CHACHA20_POLY1305_SHA256 TLS_AES_128_CCM_SHA256 TLS_AES_128_CCM_8_SHA256
   TLS-1-2-FS-WITH-1-3	TLS 1.2 and later, and supported forward secrecy cipher suites (high compatibility and ultra-high security)	TLS 1.3 TLS 1.2	ECDHE-RSA-AES256-GCM-SHA384 ECDHE-RSA-AES128-GCM-SHA256 ECDHE-ECDSA-AES256-GCM-SHA384 ECDHE-ECDSA-AES128-GCM-SHA256 ECDHE-ECDSA-AES128-SHA256 ECDHE-RSA-AES128-SHA256 ECDHE-ECDSA-AES256-SHA384 ECDHE-RSA-AES256-SHA384 TLS_AES_128_GCM_SHA256 TLS_AES_256_GCM_SHA384 TLS_CHACHA20_POLY1305_SHA256 TLS_AES_128_CCM_SHA256 TLS_AES_128_CCM_8_SHA256
   hybrid-policy-1-0	TLS 1.1 and TLS 1.2 and supported cipher suites (moderate compatibility and moderate security)	TLS 1.2 TLS 1.1	ECDHE-RSA-AES256-GCM-SHA384 ECDHE-RSA-AES128-GCM-SHA256 ECDHE-ECDSA-AES256-GCM-SHA384 ECDHE-ECDSA-AES128-GCM-SHA256 AES128-GCM-SHA256 AES256-GCM-SHA384 ECDHE-ECDSA-AES128-SHA256 ECDHE-RSA-AES128-SHA256 AES128-SHA256 AES256-SHA256 ECDHE-ECDSA-AES256-SHA384 ECDHE-RSA-AES256-SHA384 ECDHE-ECDSA-AES128-SHA ECDHE-RSA-AES128-SHA ECDHE-RSA-AES256-SHA ECDHE-ECDSA-AES256-SHA AES128-SHA AES256-SHA ECC-SM4-SM3 ECDHE-SM4-SM3

   

   • This table lists the cipher suites supported by ELB. Generally, clients also support multiple cipher suites. In actual use, the cipher suites supported by ELB and clients are used, and the cipher suites supported by ELB take precedence.
8. Click OK.

Differences Between Security Policies

Changing a Security Policy

When you change a security policy, ensure that the security group containing backend servers allows traffic from 100.125.0.0/16 to backend servers and allows ICMP packets for UDP health checks. Otherwise, backend servers will be considered unhealthy, and routing will be affected.

1. Log in to the management console.
2. In the upper left corner of the page, click and select the desired region and project.
3. Hover on in the upper left corner to display Service List and choose Network > Elastic Load Balance.
4. Locate the load balancer and click its name.
5. Click Listeners, locate the listener, and click its name.
6. On the Summary tab page, click Edit on the top right.
7. In the Modify Listener dialog box, expand Advanced Settings and change the security policy.
8. Click OK.