- What's New
- Function Overview
- Service Overview
- Getting Started
-
User Guide
- Permissions Management
- VPC and Subnet
- Route Table and Route
- Virtual IP Address
-
Elastic Network Interface and Supplementary Network Interface
-
Elastic Network Interface
- Elastic Network Interface Overview
- Creating a Network Interface
- Viewing the Basic Information About a Network Interface
- Attaching a Network Interface to a Cloud Server
- Binding an EIP to a Network Interface
- Binding a Network Interface to a Virtual IP Address
- Detaching a Network Interface from an Instance or Unbinding an EIP from a Network Interface
- Changing Security Groups That Are Associated with a Network Interface
- Deleting a Network Interface
-
Supplementary Network Interfaces
- Supplementary Network Interface Overview
- Creating a Supplementary Network Interface
- Viewing the Basic Information About a Supplementary Network Interface
- Binding or Unbinding an EIP to or from a Supplementary Network Interface
- Changing Security Groups That Are Associated with a Supplementary Network Interface
- Deleting a Supplementary Network Interface
-
Network Interface Configuration Examples
- Binding an EIP to the Extended Network Interface of an ECS to Enable Internet Access
-
Configuring Policy-based Routes for an ECS with Multiple Network Interfaces
- Overview
- Collecting ECS Network Information
- Configuring IPv4 and IPv6 Policy-based Routes for a Linux ECS with Multiple Network Interfaces (CentOS)
- Configuring IPv4 and IPv6 Policy-based Routes for a Linux ECS with Multiple Network Interfaces (Ubuntu)
- Configuring IPv4 and IPv6 Policy-based Routes for a Windows ECS with Multiple Network Interfaces
-
Elastic Network Interface
-
Access Control
- Access Control Overview
-
Security Group
- Security Group and Security Group Rule Overview
- Default Security Groups
- Security Group Examples
- Common ECS Ports
- Managing a Security Group
-
Managing Security Group Rules
- Adding a Security Group Rule
- Fast-Adding Security Group Rules
- Allowing Common Ports with a Few Clicks
- Modifying a Security Group Rule
- Replicating a Security Group Rule
- Enabling or Disabling One or More Security Group Rules
- Importing and Exporting Security Group Rules
- Deleting One or More Security Group Rules
- Querying Security Group Rule Changes
- Managing Instances Added to a Security Group
- Network ACL
- IP Address Group
-
VPC Peering Connection
- VPC Peering Connection Overview
- VPC Peering Connection Usage
- Creating a VPC Peering Connection to Connect Two VPCs in the Same Account
- Creating a VPC Peering Connection to Connect Two VPCs in Different Accounts
- Obtaining the Peer Project ID of a VPC Peering Connection
- Modifying a VPC Peering Connection
- Viewing VPC Peering Connections
- Deleting a VPC Peering Connection
- Modifying Routes Configured for a VPC Peering Connection
- Viewing Routes Configured for a VPC Peering Connection
- Deleting Routes Configured for a VPC Peering Connection
- VPC Sharing
-
Edge Gateway
- Edge Gateway Overview
- Buying an Edge Gateway
- Associating VPCs with or Disassociating VPCs from an Edge Gateway
- Managing Edge Gateways
- Managing the Tags of an Edge Gateway
- Creating an Edge Connection
- Binding or Unbinding a Global Connection Bandwidth to and from an Edge Connection
- Managing Edge Connections
- IPv4/IPv6 Dual-Stack Network
- VPC Flow Log
-
Traffic Mirroring
- Traffic Mirroring
- Mirror Filters
-
Mirror Sessions
- Creating a Mirror Session
- Enabling or Disabling a Mirror Session
- Associating Mirror Sources with a Mirror Session
- Disassociating Mirror Sources from a Mirror Session
- Changing the Mirror Filter for a Mirror Session
- Changing the Mirror Target of a Mirror Session
- Modifying the Basic Information About a Mirror Session
- Viewing the Details About a Mirror Session
- Deleting a Mirror Session
- Traffic Mirroring Example Scenarios
- Monitoring and Auditing
- Managing Quotas
- Best Practices
-
API Reference
- Before You Start
- API Overview
- Calling APIs
- APIs
-
API V3
- VPC
- Security Group
- Security Group Rule
- IP Address Group
-
Supplementary Network Interface
- Creating a Supplementary Network Interface
- Creating Supplementary Network Interfaces in Batches
- Querying Supplementary Network Interfaces
- Querying the Details of a Supplementary Network Interface
- Querying the Number of Supplementary Network Interfaces
- Updating a Supplementary Network Interface
- Deleting a Supplementary Network Interface
-
Traffic Mirror Sessions
- Querying Traffic Mirror Sessions
- Querying Details About a Traffic Mirror Session
- Creating a Traffic Mirror Session
- Updating a Traffic Mirror Session
- Deleting a Traffic Mirror Session
- Disassociating a Traffic Mirror Source from a Traffic Mirror Session
- Associating a Traffic Mirror Source with a Traffic Mirror Session
- Traffic Mirror Filters
- Traffic Mirror Filter Rules
- Network ACL
- Network ACL Tag Management
- Port
-
Native OpenStack Neutron APIs (V2.0)
- API Version Information
- Port
- Network
- Subnet
- Router
-
Network ACL
- Querying Network ACL Rules
- Querying a Network ACL Rule
- Creating a Network ACL Rule
- Updating a Network ACL Rule
- Deleting a Network ACL Rule
- Querying Network ACL Policies
- Querying a Network ACL Policy
- Creating a Network ACL Policy
- Updating a Network ACL Policy
- Deleting a Network ACL Policy
- Inserting a Network ACL Rule
- Removing a Network ACL Rule
- Querying Network ACL Groups
- Querying a Network ACL Group
- Creating a Network ACL Group
- Updating a Network ACL Group
- Deleting a Network ACL Group
- Security Group
- Application Examples
-
Permissions and Supported Actions
- Introduction
- VPC
- Subnet
- Port
- VPC Peering Connection
- VPC Route
- Route Table
- Quota
- Private IP Address
- Security Group
- Security Group Rule
- VPC Tag
- Subnet Tag
- VPC Flow Log
- Port (OpenStack Neutron API)
- Network (OpenStack Neutron API)
- Subnet (OpenStack Neutron API)
- Router (OpenStack Neutron API)
- Network ACL (OpenStack Neutron API)
- Security Group (OpenStack Neutron API)
- VPC (V3)
- Security Group (V3)
- Security Group Rule (V3)
- IP Address Group (V3)
- Supplementary Network Interface (V3)
- Mirror Session (V3)
- Mirror Filter (V3)
- Mirror Filter Rule (V3)
- Network ACL (V3)
- Network ACL Tag (V3)
- Port (V3)
- Precautions for API Permissions
- FAQs
- Out-of-Date APIs
- Appendix
- SDK Reference
-
FAQs
-
Billing and Payments
- Will I Be Billed for Using the VPC Service?
- Why Is My VPC Still Being Billed After It Was Deleted?
- How Do I View My VPC Bills?
- How Is an EIP Charged?
- How Do I Change My EIP Billing Mode Between Pay-per-Use and Yearly/Monthly?
- How Do I Change the Billing Option of a Pay-per-Use EIP Between By Bandwidth and By Traffic?
-
VPCs and Subnets
- What Is Virtual Private Cloud?
- Which CIDR Blocks Are Available for the VPC Service?
- How Many VPCs Can I Create?
- Can Subnets Communicate with Each Other?
- What Subnet CIDR Blocks Are Available?
- Can I Change the CIDR Block of a Subnet?
- How Many Subnets Can I Create?
- How Do I Make the Changed DHCP Lease Time of a Subnet Take Effect Immediately?
- How Can I Make a Domain Name in a Subnet Take Effect Immediately After Being Changed?
- Why Can't I Delete My VPCs and Subnets?
- Can I Change the VPC of an ECS?
- Why Is the ECS IP Address Released After the System Time Is Changed?
- How Do I Change the DNS Server Address of an ECS?
-
EIPs
- How Do I Assign or Retrieve a Specific EIP?
- What Are the Differences Between EIPs, Private IP Addresses, and Virtual IP Addresses?
- Can I Change the Dedicated Bandwidth Used by an EIP to a Shared Bandwidth?
- How Many ECSs Can I Bind an EIP To?
- How Do I Access an ECS with an EIP Bound from the Internet?
- What Is the EIP Assignment Policy?
- Can I Bind an EIP of an ECS to Another ECS?
- Can I Buy a Specific EIP?
- How Do I Query the Region of My EIPs?
- How Can I Unbind an Existing EIP from an Instance and Bind Another EIP to the Instance?
- Can I Bind an EIP to a Cloud Resource in Another Region?
- Can I Change the Region of an EIP?
- VPC Peering Connections
- Virtual IP Addresses
-
Bandwidth
- What Are Inbound Bandwidth and Outbound Bandwidth?
- What Are the Differences Between Static BGP, Dynamic BGP, and Premium BGP?
- How Do I Know If My EIP Bandwidth Has Been Exceeded?
- What Are the Differences Between Public Bandwidth and Private Bandwidth?
- What Bandwidth Types Are Available?
- What Are the Differences Between a Dedicated Bandwidth and a Shared Bandwidth? Can a Dedicated Bandwidth Be Changed to a Shared Bandwidth or the Other Way Around?
- How Many EIPs Can I Add to Each Shared Bandwidth?
- Can I Increase a Yearly/Monthly Bandwidth and Decrease It Later?
- What Is the Relationship Between Bandwidth and Upload/Download Rate?
-
Connectivity
- Does a VPN Allow Communication Between Two VPCs?
- Why Cannot I Access Public Websites Through Domain Names or Access Internal Domain Names on the Cloud When My ECS Has Multiple Network Interfaces?
- What Are the Priorities of the Custom Route and EIP If Both Are Configured for an ECS to Enable the ECS to Access the Internet?
- Why Are There Intermittent Interruptions When a Local Host Accesses a Website Built on an ECS?
- Why Do ECSs Using Private IP Addresses in the Same Subnet Only Support One-Way Communication?
- Why Does Communication Fail Between Two ECSs in the Same VPC or Packet Loss Occur When They Communicate?
- Why Can't My ECS Use Cloud-init?
- Why Can't My ECS Access the Internet Even After an EIP Is Bound?
- Why Is My ECS Unable to Communicate at a Layer 2 or Layer 3 Network?
- How Do I Handle a BMS Network Failure?
- Why Does My ECS Fail to Obtain an IP Address?
- How Do I Handle a VPN or Direct Connect Connection Network Failure?
- Why Can My Server Be Accessed from the Internet But Cannot Access the Internet?
- Why Can't I Access Websites Using IPv6 Addresses After IPv4/IPv6 Dual Stack Is Configured?
- Why Does My ECS Fail to Communicate with Other After It Has Firewall Installed?
- Routing
-
Security
- Does a New Security Group Rule or a Network ACL Rule Take Effect Immediately for Existing Connections?
- Why Is Outbound Access on TCP Port 25 Blocked?
- How Do I Know the Instances Associated with a Security Group?
- Why Can't I Delete a Security Group?
- Can I Change the Security Group of an ECS?
- How Do I Configure a Security Group for Multi-Channel Protocols?
- Why Are Some Ports of ECSs Inaccessible?
- Why Is Access from a Specific IP Address Still Allowed After a Network ACL Rule That Denies the Access from the IP Address Has Been Added?
- Why Are My Security Group Rules Not Working?
-
Billing and Payments
- Videos
- Glossary
-
More Documents
-
User Guide (ME-Abu Dhabi Region)
- Service Overview
- Getting Started
- VPC and Subnet
- Route Tables
-
Virtual IP Address
- Virtual IP Address Overview
- Assigning a Virtual IP Address
- Binding a Virtual IP Address to an EIP or ECS
- Binding a Virtual IP Address to an EIP
- Unbinding a Virtual IP Address from an Instance
- Unbinding a Virtual IP Address from an EIP
- Releasing a Virtual IP Address
- Disabling IP Forwarding on the Standby ECS
- Disabling Source/Destination Check for an ECS NIC
-
Elastic Network Interface and Supplementary Network Interface
-
Elastic Network Interface
- Elastic Network Interface Overview
- Creating a Network Interface
- Viewing Basic Information About a Network Interface
- Attaching a Network Interface to an Instance
- Binding a Network Interface to an EIP
- Binding a Network Interface to a Virtual IP Address
- Detaching a Network Interface from an Instance or Unbinding an EIP from a Network Interface
- Changing Security Groups That Are Associated with a Network Interface
- Deleting a Network Interface
-
Supplementary Network Interfaces
- Supplementary Network Interface Overview
- Creating a Supplementary Network Interface
- Viewing Basic Information About a Supplementary Network Interface
- Binding or Unbinding a Supplementary Network Interface to or from an EIP
- Changing Security Groups That Are Associated with a Supplementary Network Interface
- Deleting a Supplementary Network Interface
-
Elastic Network Interface
-
Access Control
- What Is Access Control?
- Security Group
- Network ACL
-
VPC Peering Connection
- VPC Peering Connection Overview
- VPC Peering Connection Usage Examples
- Creating a VPC Peering Connection with Another VPC in Your Account
- Creating a VPC Peering Connection with a VPC in Another Account
- Obtaining the Peer Project ID of a VPC Peering Connection
- Modifying a VPC Peering Connection
- Viewing VPC Peering Connections
- Deleting a VPC Peering Connection
- Modifying Routes Configured for a VPC Peering Connection
- Viewing Routes Configured for a VPC Peering Connection
- Deleting Routes Configured for a VPC Peering Connection
- VPC Flow Log
- Elastic IP
- Shared Bandwidth
- Monitoring
-
FAQ
- General Questions
- VPCs and Subnets
- EIPs
- VPC Peering Connections
- Bandwidth
-
Connectivity
- Does a VPN Allow Communication Between Two VPCs?
- Why Are Internet or Internal Domain Names in the Cloud Inaccessible Through Domain Names When My ECS Has Multiple NICs?
- What Are the Priorities of the Custom Route and EIP If Both Are Configured for an ECS to Enable the ECS to Access the Internet?
- Why Can't My ECS Access the Internet Even After an EIP Is Bound?
-
Routing
- Can a Route Table Span Multiple VPCs?
- How Many Routes Can a Route Table Contain?
- Are There Any Restrictions on Using a Route Table?
- Do the Same Routing Priorities Apply to Direct Connect Connections and Custom Routes in the Same VPC?
- Are There Different Routing Priorities of the VPN and Custom Routes in the Same VPC?
- Security
- Change History
-
API Reference
- Before You Start
- API Overview
- Calling APIs
- Getting Started
- VPC APIs (V1/V2)
-
VPC APIs (V3)
- VPC
- Security Group
- Security Group Rule
- IP Address Group
-
Supplementary Network Interface
- Creating a Supplementary Network Interface
- Creating Supplementary Network Interfaces in Batches
- Querying Supplementary Network Interfaces
- Querying the Details of a Supplementary Network Interface
- Querying the Number of Supplementary Network Interfaces
- Updating a Supplementary Network Interface
- Deleting a Supplementary Network Interface
- Network ACL
- Network ACL Tag Management
-
Native OpenStack Neutron APIs (V2.0)
- API Version Information
- Port
- Network
- Subnet
- Router
-
Network ACL
- Querying Network ACL Rules
- Querying a Network ACL Rule
- Creating a Network ACL Rule
- Updating a Network ACL Rule
- Deleting a Network ACL Rule
- Querying Network ACL Policies
- Querying a Network ACL Policy
- Creating a Network ACL Policy
- Updating a Network ACL Policy
- Deleting a Network ACL Policy
- Inserting a Network ACL Rule
- Removing a Network ACL Rule
- Querying Network ACL Groups
- Querying a Network ACL Group
- Creating a Network ACL Group
- Updating a Network ACL Group
- Deleting a Network ACL Group
- Security Group
-
Permissions and Supported Actions
- Introduction
- VPC
- Subnet
- Port
- VPC Peering Connection
- VPC Route
- Route Table
- Quota
- Private IP Address
- Security Group
- Security Group Rule
- VPC Tag
- Subnet Tag
- Port (OpenStack Neutron API)
- Network (OpenStack Neutron API)
- Subnet (OpenStack Neutron API)
- Router (OpenStack Neutron API)
- Network ACL (OpenStack Neutron API)
- Security Group (OpenStack Neutron API)
- VPC (V3)
- Security Group (V3)
- Security Group Rule (V3)
- IP Address Group (V3)
- Supplementary Network Interface (V3)
- Network ACL (V3)
- Network ACL Tag (V3)
- Precautions for API Permissions
- Out-of-Date APIs
- Appendix
- Change History
-
User Guide (Paris Regions)
- Service Overview
- Getting Started
- VPC and Subnet
-
Access Control
- Differences Between Security Groups and Network ACLs
- Security Group
- Network ACL
- Elastic IP
- Shared Bandwidth
- Route Tables
-
VPC Peering Connection
- VPC Peering Connection Overview
- VPC Peering Connection Usage Examples
- Creating a VPC Peering Connection with Another VPC in Your Account
- Creating a VPC Peering Connection with a VPC in Another Account
- Obtaining the Peer Project ID of a VPC Peering Connection
- Modifying a VPC Peering Connection
- Viewing VPC Peering Connections
- Deleting a VPC Peering Connection
- Modifying Routes Configured for a VPC Peering Connection
- Viewing Routes Configured for a VPC Peering Connection
- Deleting Routes Configured for a VPC Peering Connection
- VPC Flow Log
-
Virtual IP Address
- Virtual IP Address Overview
- Assigning a Virtual IP Address
- Binding a Virtual IP Address to an EIP or ECS
- Binding a Virtual IP Address to an EIP
- Unbinding a Virtual IP Address from an Instance
- Unbinding a Virtual IP Address from an EIP
- Releasing a Virtual IP Address
- Disabling IP Forwarding on the Standby ECS
- Disabling Source/Destination Check for an ECS NIC
- Interconnecting with CTS
- Monitoring
-
FAQ
- General Questions
- Billing and Payments
- VPCs and Subnets
-
EIPs
- What Are the Differences Between EIP, Private IP Address, and Virtual IP Address?
- How Do I Access the Internet Using an EIP Bound to an Extension NIC?
- What Are the Differences Between the Primary and Extension NICs of ECSs?
- Can an EIP That Uses Dedicated Bandwidth Be Changed to Use Shared Bandwidth?
- Can I Bind an EIP to Multiple ECSs?
- How Do I Access an ECS with an EIP Bound from the Internet?
- Can I Bind an EIP of an ECS to Another ECS?
- How Do I Unbind an EIP from an Instance and Bind a New EIP to the Instance?
- Can I Bind an EIP to a Cloud Resource in Another Region?
- Can I Change the Region of My EIP?
- VPC Peering Connections
- Virtual IP Addresses
-
Bandwidth
- What Are Inbound Bandwidth and Outbound Bandwidth?
- How Do I Know If My EIP Bandwidth Limit Has Been Exceeded?
- What Are the Differences Between Public Bandwidth and Private Bandwidth?
- What Is the Bandwidth Size Range?
- What Bandwidth Types Are Available?
- What Are the Differences Between a Dedicated Bandwidth and a Shared Bandwidth?
- Is There a Limit to the Number of EIPs That Can Be Added to Each Shared Bandwidth?
- What Is the Relationship Between Bandwidth and Upload/Download Rate?
-
Connectivity
- Does a VPN Allow Communication Between Two VPCs?
- Why Are Internet or Internal Domain Names in the Cloud Inaccessible Through Domain Names When My ECS Has Multiple NICs?
- What Are the Priorities of the Custom Route and EIP If Both Are Configured for an ECS to Enable the ECS to Access the Internet?
- Why Are There Intermittent Interruptions When a Local Host Accesses a Website Built on an ECS?
- Why Do ECSs Using Private IP Addresses in the Same Subnet Only Support One-Way Communication?
- Why Does Communication Fail Between Two ECSs in the Same VPC or Packet Loss Occur When They Communicate?
- Why Can't My ECS Use Cloud-init?
- Why Can't My ECS Access the Internet Even After an EIP Is Bound?
- Why Does My ECS Fail to Obtain an IP Address?
- How Do I Handle a VPN or Direct Connect Connection Network Failure?
- Why Can My Server Be Accessed from the Internet But Cannot Access the Internet?
- Why Can't I Access Websites Using IPv6 Addresses After IPv4/IPv6 Dual Stack Is Configured?
- Why Does My ECS Fail to Communicate with Other After It Has Firewall Installed?
-
Routing
- How Do I Configure Policy-Based Routes for an ECS with Multiple NICs?
- Can a Route Table Span Multiple VPCs?
- How Many Routes Can a Route Table Contain?
- Are There Any Restrictions on Using a Route Table?
- Do the Same Routing Priorities Apply to Direct Connect Connections and Custom Routes in the Same VPC?
- Are There Different Routing Priorities of the VPN and Custom Routes in the Same VPC?
-
Security
- Are the Security Group Rules Considered the Same If All Parameters Except Their Description Are the Same?
- How Do I Know the Instances Associated with a Security Group?
- Why Can't I Delete a Security Group?
- Can I Change the Security Group of an ECS?
- How Do I Configure a Security Group for Multi-Channel Protocols?
- Does a Modified Security Group Rule or a Network ACL Rule Take Effect Immediately for Existing Connections?
- Which Security Group Rule Has a High Priority When Multiple Security Group Rules Conflict?
- Why Is Access from a Specific IP Address Still Allowed After a Network ACL Rule That Denies the Access from the IP Address Has Been Added?
- Why Do My Security Group Rules Not Take Effect?
- Change History
-
API Reference (Paris Regions)
- Before You Start
- API Overview
- Calling APIs
- Getting Started
-
APIs
- Virtual Private Cloud
- Subnet
- EIP
- Bandwidth
- Bandwidth (V2.0)
- Quota
- Private IP Address
- Security Group
- VPC Peering Connection
- VPC Route
- Route Table
- VPC Tag Management
- Subnet Tag Management
- EIP Tag Management
- VPC Flow Log
-
Virtual IP Address
- Virtual IP Address Overview
- Binding an ECS to a Virtual IP Address
- Accessing a Virtual IP Address Using an EIP
- Using a VPN to Access the Virtual IP Address
- Using a Direct Connect Connection to Access the Virtual IP Address
- Using a VPC Peering Connection to Access the Virtual IP Address
- Disabling Source and Destination Check (HA Load Balancing Cluster Scenario)
- API V3
-
Native OpenStack Neutron APIs (V2.0)
- API Version Information
- Port
- Network
- Subnet
- Router
- Floating IP Address
-
Network ACL
- Querying Network ACL Rules
- Querying a Network ACL Rule
- Creating a Network ACL Rule
- Updating a Network ACL Rule
- Deleting a Network ACL Rule
- Querying Network ACL Policies
- Querying a Network ACL Policy
- Creating a Network ACL Policy
- Updating a Network ACL Policy
- Deleting a Network ACL Policy
- Inserting a Network ACL Rule
- Removing a Network ACL Rule
- Querying Network ACL Groups
- Querying a Network ACL Group
- Creating a Network ACL Group
- Updating a Network ACL Group
- Deleting a Network ACL Group
- Security Group
- Application Examples
-
Permissions Policies and Supported Actions
- VPC
- Subnet
- EIP
- Bandwidth
- Bandwidth (V2.0)
- EIP V3
- VPC Peering Connection
- VPC Route
- Route Table
- Quota
- Private IP Address
- Security Group
- VPC Flow Log
- Port (OpenStack Neutron API)
- Network (OpenStack Neutron API)
- Subnet (OpenStack Neutron API)
- Router (OpenStack Neutron API)
- Floating IP Address (OpenStack Neutron API)
- Network ACL (OpenStack Neutron API)
- Security Group (OpenStack Neutron API)
- Precautions for API Permissions
- Appendix
- Change History
-
User Guide (Kuala Lumpur Region)
- Service Overview
- Getting Started
- VPC and Subnet
- Route Tables
- Virtual IP Address
-
Access Control
- What Is Access Control?
- Security Group
- Network ACL
-
VPC Peering Connection
- VPC Peering Connection Overview
- VPC Peering Connection Usage Examples
- Creating a VPC Peering Connection with Another VPC in Your Account
- Creating a VPC Peering Connection with a VPC in Another Account
- Obtaining the Peer Project ID of a VPC Peering Connection
- Modifying a VPC Peering Connection
- Viewing VPC Peering Connections
- Deleting a VPC Peering Connection
- Modifying Routes Configured for a VPC Peering Connection
- Viewing Routes Configured for a VPC Peering Connection
- Deleting Routes Configured for a VPC Peering Connection
- VPC Flow Log
- Elastic IP
- Shared Bandwidth
- Interconnecting with CTS
- Monitoring
-
FAQ
- General Questions
- VPCs and Subnets
- EIPs
- VPC Peering Connections
- Bandwidth
- Connectivity
-
Routing
- Can a Route Table Span Multiple VPCs?
- How Many Routes Can a Route Table Contain?
- Are There Any Restrictions on Using a Route Table?
- Do the Same Routing Priorities Apply to Direct Connect Connections and Custom Routes in the Same VPC?
- Are There Different Routing Priorities of the VPN and Custom Routes in the Same VPC?
- Security
- Change History
-
API Reference (Kuala Lumpur Region)
- Before You Start
- API Overview
- Calling APIs
- Getting Started
- APIs
-
Native OpenStack Neutron APIs (V2.0)
- API Version Information
- Port
- Network
- Subnet
- Router
-
Network ACL
- Querying Network ACL Rules
- Querying a Network ACL Rule
- Creating a Network ACL Rule
- Updating a Network ACL Rule
- Deleting a Network ACL Rule
- Querying Network ACL Policies
- Querying a Network ACL Policy
- Creating a Network ACL Policy
- Updating a Network ACL Policy
- Deleting a Network ACL Policy
- Inserting a Network ACL Rule
- Removing a Network ACL Rule
- Querying Network ACL Groups
- Querying a Network ACL Group
- Creating a Network ACL Group
- Updating a Network ACL Group
- Deleting a Network ACL Group
- Security Group
-
Permissions Policies and Supported Actions
- VPC
- Subnet
- Port
- VPC Peering Connection
- Quota
- Private IP Address
- Security Group
- Security Group Rule
- VPC Tags
- Subnet Tags
- Port (OpenStack Neutron API)
- Network (OpenStack Neutron API)
- Subnet (OpenStack Neutron API)
- Router (OpenStack Neutron API)
- Network ACL (OpenStack Neutron API)
- Security Group (OpenStack Neutron API)
- Precautions for API Permissions
- Out-of-Date APIs
- Appendix
- Change History
-
User Guide (Ankara Region)
- Service Overview
- Getting Started
- VPC and Subnet
- Route Tables
-
Virtual IP Address
- Virtual IP Address Overview
- Assigning a Virtual IP Address
- Binding a Virtual IP Address to an EIP or ECS
- Binding a Virtual IP Address to an EIP
- Unbinding a Virtual IP Address from an Instance
- Unbinding a Virtual IP Address from an EIP
- Releasing a Virtual IP Address
- Disabling IP Forwarding on the Standby ECS
- Disabling Source/Destination Check for an ECS NIC
-
Elastic Network Interface and Supplementary Network Interface
-
Elastic Network Interface
- Elastic Network Interface Overview
- Creating a Network Interface
- Viewing Basic Information About a Network Interface
- Attaching a Network Interface to an Instance
- Binding a Network Interface to an EIP
- Binding a Network Interface to a Virtual IP Address
- Detaching a Network Interface from an Instance or Unbinding an EIP from a Network Interface
- Changing Security Groups That Are Associated with a Network Interface
- Deleting a Network Interface
-
Supplementary Network Interfaces
- Supplementary Network Interface Overview
- Creating a Supplementary Network Interface
- Viewing Basic Information About a Supplementary Network Interface
- Binding or Unbinding a Supplementary Network Interface to or from an EIP
- Changing Security Groups That Are Associated with a Supplementary Network Interface
- Deleting a Supplementary Network Interface
-
Elastic Network Interface
-
Access Control
- What Is Access Control?
- Security Group
- Network ACL
-
VPC Peering Connection
- VPC Peering Connection Overview
- VPC Peering Connection Usage Examples
- Creating a VPC Peering Connection with Another VPC in Your Account
- Creating a VPC Peering Connection with a VPC in Another Account
- Obtaining the Peer Project ID of a VPC Peering Connection
- Modifying a VPC Peering Connection
- Viewing VPC Peering Connections
- Deleting a VPC Peering Connection
- Modifying Routes Configured for a VPC Peering Connection
- Viewing Routes Configured for a VPC Peering Connection
- Deleting Routes Configured for a VPC Peering Connection
- VPC Flow Log
- Elastic IP
- Shared Bandwidth
- Monitoring
- Permissions Management
-
FAQ
- General Questions
- VPCs and Subnets
- EIPs
- VPC Peering Connections
- Bandwidth
- Connectivity
- Routing
-
Security
- Does a Modified Security Group Rule or a Network ACL Rule Take Effect Immediately for Existing Connections?
- Why Can't I Delete a Security Group?
- Can I Change the Security Group of an ECS?
- How Do I Configure a Security Group for Multi-Channel Protocols?
- Which Security Group Rule Has a High Priority When Multiple Security Group Rules Conflict?
- Change History
-
API Reference (Ankara Region)
- Before You Start
- API Overview
- Calling APIs
- Getting Started
- APIs
- API V3
-
Native OpenStack Neutron APIs (V2.0)
- API Version Information
- Port
- Network
- Subnet
- Router
- Floating IP Address
-
Network ACL
- Querying Network ACL Rules
- Querying a Network ACL Rule
- Creating a Network ACL Rule
- Updating a Rule
- Deleting a Network ACL Rule
- Querying Network ACL Policies
- Querying a Network ACL Policy
- Creating a Network ACL Policy
- Updating a Network ACL Policy
- Deleting a Network ACL Policy
- Inserting a Network ACL Rule
- Removing a Network ACL Rule
- Querying Network ACL Groups
- Querying a Network ACL Group
- Creating a Network ACL Group
- Updating a Network ACL Group
- Deleting a Network ACL Group
- Security Group
-
Permissions Policies and Supported Actions
- Introduction
- VPC
- Subnet
- EIP
- Bandwidth
- Bandwidth (V2.0)
- EIP V3
- Port
- VPC Peering Connection
- VPC Route
- Route Table
- Quota
- Private IP Address
- Security Group
- Security Group Rule
- Port (OpenStack Neutron API)
- Network (OpenStack Neutron API)
- Subnet (OpenStack Neutron API)
- Router (OpenStack Neutron API)
- Floating IP Address (OpenStack Neutron API)
- Network ACL (OpenStack Neutron API)
- Security Group (OpenStack Neutron API)
- Precautions for API Permissions
- Appendix
- Change History
-
User Guide (ME-Abu Dhabi Region)
- General Reference
Copied.
Authentication
- Token authentication: Requests are authenticated using tokens.
- AK/SK authentication: Requests are encrypted using AK/SK pairs. AK/SK authentication is recommended because it is more secure than token authentication.
Token Authentication
The validity period of a token is 24 hours. When using a token for authentication, cache it to prevent frequently calling the IAM API used to obtain a user token.
A token specifies temporary permissions in a computer system. During API authentication using a token, the token is added to requests to get permissions for calling the API. You can obtain a token by calling the API.
VPC is a project-level service. When you call the API, set auth.scope in the request body to project.
{ "auth": { "identity": { "methods": [ "password" ], "password": { "user": { "name": "username", // IAM user name "password": "********", // IAM user password "domain": { "name": "domainname" // Name of an IAM account } } } }, "scope": { "project": { "name": "xxxxxxxx" // Project Name } } } }
After a token is obtained, the X-Auth-Token header field must be added to requests to specify the token when calling other APIs. For example, if the token is ABCDEFJ...., X-Auth-Token: ABCDEFJ.... can be added to a request as follows:
1 2 3 |
POST https://{{endpoint}}/v3/auth/projects Content-Type: application/json X-Auth-Token: ABCDEFJ.... |
AK/SK Authentication
An AK/SK is used to verify the identity of a request sender. In AK/SK authentication, a signature needs to be obtained and then added to requests.
AK: access key ID, which is a unique identifier used in conjunction with a secret access key to sign requests cryptographically.
SK: secret access key, which is used in conjunction with an AK to sign requests cryptographically. It identifies a request sender and prevents the request from being modified.
The following uses a demo project to show how to sign a request and use an HTTP client to send an HTTPS request.
Download the demo project at https://github.com/api-gate-way/SdkDemo.
If you do not need the demo project, visit the following URL to download the API Gateway signing SDK:
Obtain the API Gateway signing SDK from the enterprise administrator.
Extract a JAR file from the downloaded package. Add the extracted JAR file to the project as a dependency package. The following figure shows an example.

- Generate an AK/SK. (If you already have an AK/SK file, skip this step and find it. Generally, the file name is credentials.csv.)
- Log in to the management console.
- Click the username and select My Credentials from the drop-down list.
- In the navigation tree on the left, click Access Keys.
- Click Add Access Key.
- Enter an access key description and click OK.
- Enter the verification code received by email, SMS message, or MFA application.
NOTE:
If you have enabled operation protection (Security Settings > Critical Operations > Operation Protection), you need to enter the verification code.
For users created in IAM that have not bound with any email address or mobile number, only the login password needs to be entered.
- Download the access key file.
NOTE:
Keep the access key secure.
- Download and extract the demo project.
- Import the demo project to Eclipse.
Figure 2 Selecting Existing Projects into WorkspaceFigure 3 Selecting the demo projectFigure 4 Structure of the demo project
- Sign the request.
The signature method is integrated into the JAR file imported in 3. Before sending the request, you need to sign the requested content. The obtained signature is included in the HTTP header of the request.
The demo code is classified into the following classes to demonstrate how to sign and send an HTTP request:
- AccessService: An abstract class that merges the GET, POST, PUT, and DELETE methods into the access method.
- Demo: An execution entry used to simulate the sending of GET, POST, PUT, and DELETE requests.
- AccessServiceImpl: Implements the access method, which contains the code required for communication with API Gateway.
- Edit the main method in the Demo.java file, and replace the bold text with actual values.
If you use other methods such as POST, PUT, and DELETE, see the corresponding comment.
Specify region, serviceName, ak/sk, and url as the actual values. In this demo, the URLs for accessing VPC resources are used.
To obtain the project ID in the URLs, see Obtaining a Project ID.
To obtain the endpoint, contact the enterprise administrator.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38
//TODO: Replace region with the name of the region in which the service to be accessed is located. private static final String region = ""; //TODO: Replace vpc with the name of the service you want to access. For example, ecs, vpc, iam, and elb. private static final String serviceName = ""; public static void main(String[] args) throws UnsupportedEncodingException { //TODO: Replace the AK and SK with those obtained on the My Credentials page. String ak = "ZIRRKMTWP******1WKNKB"; String sk = "Us0mdMNHk******YrRCnW0ecfzl"; //TODO: To specify a project ID (multi-project scenarios), add the X-Project-Id header. //TODO: To access a global service, such as IAM, DNS, CDN, and TMS, add the X-Domain-Id header to specify an account ID. //TODO: To add a header, find "Add special headers" in the AccessServiceImple.java file. //TODO: Test the API String url = "https://{Endpoint}/v1/{project_id}/vpcs"; get(ak, sk, url); //TODO: When creating a VPC, replace {project_id} in postUrl with the actual value. //String postUrl = "https://serviceEndpoint/v1/{project_id}/cloudservers"; //String postbody ="{\"vpc\": {\"name\": \"vpc\",\"cidr\": \"192.168.0.0/16\"}}"; //post(ak, sk, postUrl, postbody); //TODO: When querying a VPC, replace {project_id} in url with the actual value. //String url = "https://serviceEndpoint/v1/{project_id}/vpcs/{vpc_id}"; //get(ak, sk, url); //TODO: When updating a VPC, replace {project_id} and {vpc_id} in putUrl with the actual values. //String putUrl = "https://serviceEndpoint/v1/{project_id}/vpcs/{vpc_id}"; //String putbody ="{\"vpc\":{\"name\": \"vpc1\",\"cidr\": \"192.168.0.0/16\"}}"; //put(ak, sk, putUrl, putbody); //TODO: When deleting a VPC, replace {project_id} and {vpc_id} in deleteUrl with the actual values. //String deleteUrl = "https://serviceEndpoint/v1/{project_id}/vpcs/{vpc_id}"; //delete(ak, sk, deleteUrl); }
- Compile the code and call the API.
In the Package Explorer area on the left, right-click Demo.java, choose Run AS > Java Application from the shortcut menu to run the demo code.
You can view API call logs on the console.
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot