From PostgreSQL to Kafka

Supported Source and Destination Databases

Supported Synchronization Objects

Table 2 lists the objects that can be synchronized in different scenarios. DRS will automatically check the objects you selected before the synchronization.

Database Account Permission Requirements

To start a synchronization task, the source and destination database users must meet the requirements in the following table. Different types of synchronization tasks require different permissions. For details, see Table 3. DRS automatically checks the database account permissions in the pre-check phase and provides handling suggestions.

• You are advised to create an independent database account for DRS task connection to prevent task failures caused by database account password modification.
• After changing the account passwords for the source and destination databases, modify the connection information in the DRS task as soon as possible to prevent automatic retry after a task failure. Automatic retry will lock the database accounts.

Suggestions

• The success of database synchronization depends on environment and manual operations. To ensure a smooth synchronization, perform a synchronization trial before you start the synchronization to help you detect and resolve problems in advance.
• It is recommended that you start a task during off-peak hours to minimize the impact of synchronization on your services.
• For more information about the impact of DRS on databases, see What Is the Impact of DRS on Source and Destination Databases?

Precautions

DRS incremental synchronization consists of three phases: task start, incremental synchronization, and task completion. To ensure smooth synchronization, read the following notes before creating a synchronization task.

Prerequisites

• You have logged in to the DRS console.
• Your account balance is greater than or equal to $0 USD.
• For details about the DB types and versions supported by real-time synchronization, see Supported Databases.
• If a subaccount is used to create a DRS task, ensure that an agency has been added. To create an agency, see Agency Management.

• You have read Suggestions and Precautions.

Procedure

1. On the Data Synchronization Management page, click Create Synchronization Task.
2. On the Create Synchronization Instance page, select a region and project, specify the task name, description, and the synchronization instance details, and click Create Now.
   • Task information description
     Figure 1 Synchronization task information
     

     Table 5 Task information

     Parameter	Description
     Region	The region where the replication instance is deployed. You can change the region.
     Project	The project corresponds to the current region and can be changed.
     Task Name	The task name must start with a letter and consist of 4 to 50 characters. It can contain only letters, digits, hyphens (-), and underscores (_).
     Description	The description consists of a maximum of 256 characters and cannot contain special characters !=<>'&"\

   • Synchronization instance details
     Figure 2 Synchronization instance details
     

     Table 6 Synchronization instance settings

     Parameter	Description
     Data Flow	Select Out of the cloud.
     Source DB Engine	Select PostgreSQL.
     Destination DB Engine	Select Kafka.
     Network Type	Public network is used as an example. Available options: Public network and VPN or Direct Connect Public network is suitable for data synchronization from on-premises or external cloud databases to the destination databases bound with an EIP. VPN or Direct Connect is suitable for synchronization of data between on-premises databases and cloud databases or between cloud databases across regions.
     Source DB Instance	Specifies an RDS PostgreSQL DB instance you have created.
     Synchronization Instance Subnet	Select the subnet where the synchronization instance is located. You can also click View Subnet to go to the network console to view the subnet where the instance resides. By default, the DRS instance and the destination DB instance are in the same subnet. You need to select the subnet where the DRS instance resides, and there are available IP addresses for the subnet. To ensure that the synchronization instance is successfully created, only subnets with DHCP enabled are displayed.
     Synchronization Mode	Incremental Through log parsing, incremental data generated on the source database is synchronized to the destination database. During synchronization, the source database continues to provide services for external systems with zero downtime.

   • Task type
     Figure 3 Task type
     

     Table 7 Task type information

     Parameter	Description
     Specifications	DRS instance specifications. Different specifications have different performance upper limits. For details, see Real-Time Synchronization. NOTE: DRS allows you to upgrade specifications only for single-AZ synchronization tasks. Task specifications cannot be downgraded. For details, see Changing Specifications.
     AZ	Select the AZ where you want to create the DRS task. Selecting the one housing the source or destination database can provide better performance.

   • Enterprise Project and Tags
     Figure 4 Enterprise projects and tags
     

     Table 8 Enterprise Project and Tags

     Parameter	Description
     Enterprise Project	An enterprise project you would like to use to centrally manage your cloud resources and members. Select an enterprise project from the drop-down list. The default project is default. For more information about enterprise project, see Enterprise Management User Guide. To customize an enterprise project, click Enterprise in the upper right corner of the console. The Enterprise Project Management Service page is displayed. For details, see Creating an Enterprise Project in Enterprise Management User Guide.
     Tags	Tags a task. This configuration is optional. Adding tags helps you better identify and manage your tasks. Each task can have up to 20 tags. If your organization has configured tag policies for DRS, add tags to tasks based on the policies. If a tag does not comply with the policies, task creation may fail. Contact your organization administrator to learn more about tag policies. After a task is created, you can view its tag details on the Tags tab. For details, see Tag Management.

   

   If a task fails to be created, DRS retains the task for three days by default. After three days, the task automatically stops.

3. On the Configure Source and Destination Databases page, wait until the synchronization instance is created. Then, specify source and destination database information and click Test Connection for both the source and destination databases to check whether they have been connected to the synchronization instance. After the connection tests are successful, click Next.
   Figure 5 Source database information
   

   Table 9 Source database settings

   Parameter	Description
   DB Instance Name	The RDS for PostgreSQL instance selected when you created the migration task. The instance cannot be changed.
   Database Username	The username for accessing the source database.
   Database Password	The password for the database username.

   

   The username and password of the source database are encrypted and stored in DRS and will be cleared after the task is deleted.

   Figure 6 Destination database information
   

   Table 10 Destination database settings

   Parameter	Description
   IP Address or Domain Name	IP address or domain name of the destination database in the IP address/Domain name:Port format. The port of the destination database. Range: 1 - 65535 You can enter up to 10 groups of IP addresses or domain names of the destination database. Separate multiple values with commas (,). For example: 192.168.0.1:8080,192.168.0.2:8080.
   Method	Available options: PLAINTEXT, SSL, SASL_PLAINTEXT, and SASL_SSL. For details, see Kafka Authentication.

4. On the Set Synchronization Task page, select the synchronization policy, objects, and data format, and click Next.
   Figure 7 Synchronization mode
   

   Table 11 Synchronization object

   Parameter	Description
   Source Database Replication Slot Name	You can choose whether to specify the replication slot of the source database. After replication slot is enabled, enter the replication slot name. The name contains 63 characters and cannot start with a digit. Only lowercase letters, digits, and underscores (_) are allowed.
   Topic Synchronization Policy	Topic synchronization policy. You can select A specific topic or Auto-generated topics.
   Topic	Select the topic to be synchronized to the destination database. This parameter is available when the topic is set to A specified topic.
   Topic Name Format	This parameter is available when Topic Synchronization Policy is set to Auto-generated topics. Due to Kafka restrictions, a topic name can contain only ASCII characters, periods (.), underscores (_), and hyphens (-). If a topic name exceeds the limit, the topic fails to be created and the task is abnormal. If a topic name contains a database object name, ensure that the characters in the object name meet the Kafka topic naming requirements.
   Number of Partitions	This parameter is available when Topic Synchronization Policy is set to Auto-generated topics. The number of partitions of a topic. Each topic can have multiple partitions. More partitions can provide higher throughput but consume more resources. Set the number of partitions based on the actual situation of brokers.
   Replication Factor	This parameter is available when Topic Synchronization Policy is set to Auto-generated topics. Number of copies of a topic. Each topic can have multiple copies, and the copies are placed on different brokers in a cluster. The number of copies cannot exceed the number of brokers. Otherwise, the topic fails to be created.
   Synchronize Topic To	The policy for synchronizing topics to the Kafka partitions. If topics are synchronized to different partitions by hash value of the database, schema and table names, the performance on a single table query can be improved. If topics are synchronized to different partitions by hash value of the primary key, one table corresponds to one topic. This prevents data from being written to the same partition, and consumers can obtain data from different partitions concurrently. For a table without a primary key, if you select Partitions are identified by the hash values of the primary key, topics are synchronized to different partitions based on the hash value of the database_name.schema.table_name. Partitions are differentiated by the hash values of database_name.schema_name: This mode applies to scenarios where one database corresponds to one topic, preventing multiple schemas from being written to the same partition, so that consumers can obtain data from different partitions concurrently. If topics are synchronized to partition 0, strong consistency can be obtained but write performance is impacted.
   Data Format in Kafka	Select the data format to be delivered to Kafka. Avro refers to binary encoded format. JSON: JSON message format, which is easy to interpret but takes up more space. For details, see Kafka Message Format.
   Synchronization Object	The left pane displays the source database objects, and the right pane displays the selected objects. DRS supports table- and database-level synchronization. You can select data for synchronization based on your service requirements. NOTE: To quickly select the desired database objects, you can use the search function. If there are changes made to the source databases or objects, click in the upper right corner to update the objects to be synchronized. If the object name contains spaces, the spaces before and after the object name are not displayed. If there are multiple spaces between the object name and the object name, only one space is displayed. The name of the selected synchronization object cannot contain spaces.

5. On the Check Task page, check the synchronization task.
   • If any check fails, review the cause and rectify the fault. After the fault is rectified, click Check Again.

     For details about how to handle check failures, see Solutions to Failed Check Items in Data Replication Service User Guide.

   • If all check items are successful, click Next.
     Figure 8 Task Check
     
     

     You can proceed to the next step only when all checks are successful. If there are any items that require confirmation, view and confirm the details first before proceeding to the next step.

6. On the displayed page, specify Start Time, Send Notifications, SMN Topic, Delay Threshold (s), and Stop Abnormal Tasks After, confirm that the configured information is correct, select the check box before the agreement, and click Submit to submit the task.
   Figure 9 Task startup settings
   

   Table 12 Task startup settings

   Parameter	Description
   Start Time	Set Start Time to Start upon task creation or Start at a specified time based on site requirements. NOTE: After a synchronization task is started, the performance of the source and destination databases may be affected. You are advised to start a synchronization task during off-peak hours.
   Send Notifications	This parameter is optional. After enabled, select a SMN topic. If the status, latency metric, or data of the synchronization task is abnormal, DRS will send a notification.
   SMN Topic	This parameter is available only after you enable Send Notifications and create a topic on the SMN console and add a subscriber. For details, see Simple Message Notification User Guide.
   Delay Threshold (s)	During an incremental synchronization, a synchronization delay indicates a time difference (in seconds) of synchronization between the source and destination database. If the synchronization delay exceeds the threshold you specify, DRS will send alarms to the specified recipients. The value ranges from 0 to 3,600. To avoid repeated alarms caused by the fluctuation of delay, an alarm is sent only after the delay has exceeded the threshold for six minutes. NOTE: If the delay threshold is set to 0, no notifications will be sent to the recipient. In the early stages of an incremental synchronization, the synchronization delay is long because a large quantity of data is awaiting synchronization. In this case, no notifications will be sent. Before setting the delay threshold, enable Send Notifications.
   Data Exception Notification	This parameter is optional. After enabled, DRS will send a notification if the task data is abnormal.
   Stop Abnormal Tasks After	Number of days after which an abnormal task is automatically stopped. The value must range from 14 to 100. The default value is 14. NOTE: You can set this parameter only for pay-per-use tasks. Tasks in the abnormal state are still charged. If tasks remain in the abnormal state for a long time, they cannot be resumed. Abnormal tasks run longer than the period you set (unit: day) will automatically stop to avoid unnecessary fees.

7. After the task is submitted, you can view and manage it on the Data Synchronization Management page.
   • You can view the task status. For more information about task status, see Task Statuses.
   • You can click in the upper right corner to view the latest task status.
   • By default, DRS retains a task in the Configuration state for three days. After three days, DRS automatically deletes background resources, but the task status remains unchanged. When you configure the task again, DRS applies for resources for the task again. In this case, the IP address of the DRS instance changes.