Updated on 2024-09-05 GMT+08:00

Connecting to a DB Instance from a Linux ECS

If your DB instance and ECS are not in the same region or VPC, you can connect to your DB instance by using either of ways:

  • A Linux ECS with a MySQL client installed through an EIP
  • A local PC with a MySQL client installed through an EIP

This section describes how to connect to a DB instance using Linux ECS with the MySQL client installed through an EIP.

  1. Purchasing an ECS
  2. Binding an EIP
  3. Querying the EIP of the DB Instance to Be Connected
  4. Testing Connectivity and Installing a MySQL Client
  5. Using CLI to Connect to a DB Instance

Purchasing an ECS

  1. Log in to the management console and check whether there is an ECS available.

    Figure 1 Viewing ECSs

  2. Buy an ECS and select Linux (for example, CentOS) as its OS.

    To download a MySQL client to the ECS, bind an EIP to the ECS.

    For details about how to purchase a Linux ECS, see "Purchasing an ECS" in Elastic Cloud Server Getting Started.

  3. On the ECS Information page, view the region and VPC of the ECS.

    Figure 2 Viewing ECS basic information

  4. On the Basic Information page of the GaussDB(for MySQL) DB instance, view the region and VPC of the DB instance.

    Figure 3 Viewing instance basic information

Binding an EIP

You can bind an EIP to a DB instance for public accessibility and can unbind the EIP from the DB instance if needed.

If an EIP has been bound to the DB instance, skip this step.

  1. Log in to the management console.
  2. Click in the upper left corner and select a region and a project.
  3. Click in the upper left corner of the page, choose Databases > GaussDB(for MySQL).
  4. On the Instances page, click the instance name to go to the Basic Information page.
  5. In the Network Information area, click Bind in the Public IP Address (EIP) field.
  6. In the displayed dialog box, select an EIP and click OK.

    If no EIPs are available, click View EIP to create an EIP on the network console. After the EIP is created, go back to the Basic Information page and bind the newly created EIP to the instance.

    You need to configure security group rules and enable specific IP addresses and ports to access the DB instance. For details, see Configuring Security Group Rules.

    Figure 4 Selecting an EIP

  7. In the Public IP Address (EIP) field of the Network Information area, view the EIP that was bound.

Querying the EIP of the DB Instance to Be Connected

  1. Log in to the management console.
  2. Click in the upper left corner and select a region and a project.
  3. Click in the upper left corner of the page, choose Databases > GaussDB(for MySQL).
  4. On the Instances page, click the instance name to go to the Basic Information page.
  5. In the Network Information area, obtain the EIP and database port.

    Figure 5 Viewing the EIP of a DB instance

Testing Connectivity and Installing a MySQL Client

  1. Log in to the ECS. For details, see Login Using VNC in the Elastic Cloud Server User Guide.
  2. On the ECS, check whether the EIP and database port of the DB instance (obtained in Querying the EIP of the DB Instance to Be Connected) can be connected.

    telnet EIP port

    Example:

    telnet 192.168.0.16 3306

    If the message "command not found" is displayed, install the Telnet tool based on the OS used by the ECS.

    • If yes, network connectivity is available.
    • If no, check the security group rules.
      • If Destination is not 0.0.0.0/0 and Protocol & Port is not All on the Outbound Rules page of the ECS, add the EIP and port of the DB instance to the outbound rules.
        Figure 6 Configuring rules of an ECS security group
      • To view the inbound rules of the GaussDB(for MySQL) security group, add the EIP and port of the ECS to the inbound rules. For details, see Configuring Security Group Rules.

  3. Download the MySQL client installation package for Linux locally. A MySQL client running a version later than that of the DB instance is recommended.

    Find the link to the required version on the download page. The mysql-community-client-8.0.21-1.el6.x86_64 is used as an example.

    Figure 7 Downloading a MySQL client

  4. Upload the installation package to the ECS.
  5. You can use any terminal connection tool, such as WinSCP and PuTTY, to upload the installation package to the ECS.
  6. Run the following command to install the MySQL client:

    rpm -ivh mysql-community-client-8.0.21-1.el6.x86_64.rpm

    • If any conflicts occur during the installation, add the replacefiles parameter to the command and try to install the client again. Example:

      rpm -ivh --replacefiles mysql-community-client-8.0.21-1.el6.x86_64.rpm

    • If a message is displayed prompting you to install a dependency package, you can add the nodeps parameter to the command and install the client again. Example:

      rpm -ivh --nodeps mysql-community-client-8.0.21-1.el6.x86_64.rpm

Using CLI to Connect to a DB Instance

In Linux, use a MySQL client to connect to your instance through an SSL connection or non-SSL connection. The SSL connection encrypts data and is more secure.

  • SSL Connection (Recommended)
    1. Log in to the management console.
    2. Click in the upper left corner and select a region and a project.
    3. Click in the upper left corner of the page, choose Databases > GaussDB(for MySQL).
    4. On the Instances page, click the instance name to go to the Basic Information page.
    5. In the DB Instance Information area, check whether SSL is enabled next to the SSL field.
      • If SSL is enabled, go to 6.
      • If SSL is disabled, click . In the displayed dialog box, click Yes to enable SSL. Then go to 6.
    6. Click next to the SSL field to download Certificate Download.zip, and extract the root certificate ca.pem and bundle ca-bundle.pem from the package.
    7. Upload ca.pem to the ECS.
    8. Run the following command on the ECS to connect to the DB instance:

      mysql -h <host> -P <port> -u <userName> -p --ssl-ca=<caName>

      Example:

      mysql -h 172.16.0.31 -P 3306 -u root -p --ssl-ca=ca.pem

      Table 1 Parameter description

      Parameter

      Description

      <host>

      EIP obtained in 5.

      <port>

      Database port obtained in 5. The default value is 3306.

      <userName>

      Administrator account root.

      <caName>

      Name of the CA certificate. The certificate should be stored in the directory where the command is executed.

    9. Enter the password of the database account if the following information is displayed:
      Enter password:
  • Non-SSL Connection
    1. Run the following command on the ECS to connect to the DB instance:

      mysql -h <host> -P <port> -u <userName> -p

      Example:

      mysql -h 192.168.0.16 -P 3306 -u root -p

      Table 2 Parameter description

      Parameter

      Description

      <host>

      EIP obtained in 5.

      <port>

      Database port obtained in 5. The default value is 3306.

      <userName>

      Administrator account root.

    2. Enter the password of the database account if the following information is displayed:
      Enter password:
      Figure 8 Connection succeeded

Follow-up Operations

After logging in to the DB instance, you can create or migrate your databases.