Updated on 2022-08-12 GMT+08:00

ALM-14029 Number of Blocks in a Replica Exceeds the Threshold

Description

The system checks the number of blocks in a single replica every four hours and compares the number with the threshold. There is a threshold for the number of blocks in a single replica. This alarm is generated when the actual number of blocks in a single replica exceeds the threshold.

This alarm is cleared when the number of blocks to be supplemented is less than the threshold.

Attribute

Alarm ID

Alarm Severity

Auto Clear

14029

Minor

Yes

Parameters

Name

Meaning

Source

Specifies the cluster for which the alarm is generated.

ServiceName

Specifies the service for which the alarm is generated.

RoleName

Specifies the role for which the alarm is generated.

NameServiceName

Specifies the NameService for which the alarm is generated.

Trigger Condition

Specifies the threshold for triggering the alarm.

Impact on the System

Replica data is prone to be lost when a node is faulty. Too many files of a single replica affect the security of the HDFS file system.

Possible Causes

  • The DataNode is faulty.
  • The disk is faulty.
  • Files are written to a single replica.

Procedure

  1. On FusionInsight Manager, choose O&M. In the navigation pane on the left, choose Alarm > Alarms. On the page that is displayed, check whether alarm ALM-14003 Number of Lost HDFS Blocks Exceeds the Threshold is generated.

    • If yes, go to 2.
    • If no, go to 3.

  2. Rectify the fault according to the handling procedure of ALM-14003 Number of Lost HDFS Blocks Exceeds the Threshold. In the next detection period, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 3.

  3. Check whether files of a single replica have been written into the service.

    • If yes, go to 4.
    • If no, go to 7.

  4. Log in to the HDFS client as user root. The user password is defined by the user before the installation. Contact the system administrator to obtain the password. Run the following commands:

    • Security mode:

      cd Client installation directory

      source bigdata_env

      kinit hdfs

    • Normal mode:

      su - omm

      cd Client installation directory

      source bigdata_env

  5. Run the following command on the client node to increase the number of replicas for a single replica file:

    hdfs dfs -setrep -w file replica number file name or file path

  6. In the next detection period, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 7.

Collect the fault information.

  1. On FusionInsight Manager, choose O&M. In the navigation pane on the left, choose Log > Download.
  2. Select HDFS in the required cluster from the Service.
  3. Click in the upper right corner, and set Start Date and End Date for log collection to 10 minutes ahead of and after the alarm generation time, respectively. Then, click Download.
  4. Contact O&M personnel and provide the collected logs.

Alarm Clearing

This alarm is automatically cleared after the fault is rectified.

Related Information

None