Updated on 2024-01-25 GMT+08:00

ALM-4289601668 The board has been removed

Description

ENTITYTRAP/4/BOARDREMOVE: OID [oid] Board has been removed. (Index=[INTEGER], EntityPhysicalIndex=[INTEGER], PhysicalName="[OCTET]", EntityTrapEntType=[INTEGER], EntityTrapFaultID=[INTEGER])

The board is removed.

Attribute

AlarmID

Alarm OID

Alarm Severity

Alarm Type

3276800770

1.3.6.1.4.1.2011.5.25.667.2.39

Warning

Equipment alarm

Parameters

Name

Meaning

oid

Indicates the MIB object ID of the alarm.

Index

Indicates the index.

EntityPhysicalIndex

Indicates the physical index.

PhysicalName

Indicates the entity name, such as SFU, LPU, and MPU. The entity name varies with the type of the board.

EntityTrapEntType

Indicates the entity type.

EntityTrapFaultID

Indicates the error code: 131840.

Impact on the System

If an LPU is removed, all services running on the LPU will be interrupted. If an MPU is removed, the system reliability will be affected. If a master MPU is removed, the master/slave switchover will occur, which interrupts all services in the system.

Possible Causes

The board has been removed.

Procedure

  1. Check whether the board is removed for certain reasons, for example, routine maintenance.
    • If so, no action is required.
    • If not, go to step 2.
  2. Check whether the slot ID in the alarm belongs to an MPU.
    • If so, go to step 4.
    • If not, go to step 3.
  3. Determine whether to insert the board.
    • If so, go to step 4.
    • If not, no action is required.
  4. Insert the corresponding board. After the board is started, run the display device command to check whether the board in the corresponding slot is registered successfully.
    • If so, no action is required.
    • If not, collect alarm information and configuration information, and then contact technical support personnel.