Help Center/ Huawei Qiankun CloudService/ More Documents/ Device Alarm Handling/ V200 LSW Alarms/ ALM-3276800483 The DSCP Value of Packets Matching a Measurement Flow on a Card Conflicts with the IFIT Color Bit
Updated on 2024-01-25 GMT+08:00
View PDF
Share

ALM-3276800483 The DSCP Value of Packets Matching a Measurement Flow on a Card Conflicts with the IFIT Color Bit

Description

IFIT/4/SIPFPM_BOARD_PKT_DSCP_CONFLICT: OID [OID] The dscp value of the packets matching the sipfpm measurement flow on the card conflicts with the configured sipfpm color-bit. (Slot=[OCTET], IfIndex=[INTEGER], Direction=[OCTET], SrcIp=[OCTET], DstIp=[OCTET], Protocol=[INTEGER], SrcPort=[INTEGER], DstPort=[INTEGER], PktDscp=[INTEGER], CfgDscp=[INTEGER])

The DSCP value of the packets matching a measurement flow and received by an interface is not 0, and conflicts with the IFIT color bit configured on the device.

Attribute

Alarm ID

Alarm OID

Alarm Severity

Alarm Type

3276800483

1.3.6.1.4.1.2011.5.25.316.3.18

Info

Processing error alarm

Parameters

Name

Meaning

OID

Indicates the ID of the MIB object.

Slot

Indicates the slot ID of the carddevice that receives packets matching a measurement flow.

IfIndex

Indicates the index of the interface that receives the measurement flow.

Direction

Indicates the measurement direction of the measurement flow.

SrcIp

Indicates the source IP address of the measurement flow.

DstIp

Indicates the destination IP address of the measurement flow.

Protocol

Indicates the protocol number of the measurement flow.

SrcPort

Indicates the source port number of the measurement flow.

DstPort

Indicates the destination port number of the measurement flow.

PktDscp

Indicates the DSCP value of the packets matching the measurement flow.

CfgDscp

Indicates the configured DSCP value.

Impact on the System

Other services that use DSCP values to provide differentiated services on the network are abnormal.

Possible Causes

In network planning, services that use the DSCP field to provide differentiated services conflict with each other.

Procedure

Check the configuration of the entire network to find out whether the DSCP field is used.

Related Information

None

Parent topic: V200 LSW Alarms