Help Center/ Huawei Qiankun CloudService/ More Documents/ Device Alarm Handling/ V200 LSW Alarms/ ALM-3276800219 MAC address flapping has occurred
Updated on 2024-01-25 GMT+08:00

ALM-3276800219 MAC address flapping has occurred

Description

L2IFPPI/4/MFLPVLANALARM: OID [OID] MAC move detected, VLANID=[INTEGER], [OCTET].

MAC address flapping has occurred.

Attribute

Alarm ID

Alarm Severity

Alarm Type

3276800219

Warning

Equipment alarm

Parameters

Name

Meaning

OID

Indicates the MIB object ID of the alarm.

INTEGER

Indicates the VLAN ID.

OCTET

Indicates the flapping MAC address and interfaces between which the MAC address flaps.

Impact on the System

Traffic cannot be received normally.

Possible Causes

1:

The interfaces where loops occur are added to the same VLAN.

2:

Cables are connected incorrectly.

3:

STP is enabled to remove loops on the network.

Procedure

  1. Check that cables are connected correctly. Then check whether the alarm is still reported.

    • If yes, go to step 2.

    • If not, go to step 6.

  2. Check whether the two interfaces that learn the same MAC address can be added to different VLANs according to the networking.

    • If yes, go to step 3.

    • If not, go to step 4.

  3. Modify the configuration and add the two interfaces that learn the same MAC address to different VLANs. Then check whether the alarm is still reported.

    • If yes, go to step 4.

    • If not, go to step 6.

  4. Enable STP. Then check whether the alarm is still reported.

    • If yes, go to step 5.

    • If not, go to step 6.

  5. Contact technical support personnel.
  6. End.

Related Information

None