ALM-3276800190 The power load of a PoE card exceeds the upper limit
Description
WLAN/4/AP_POE_POWER_OVER_UTILIZATION_THRESHOLD:OID [OID] The power load of a PoE card exceeds the upper limit. (APMAC=[OPAQUE], APName=[STRING], ApIfIndex=[INTEGER], ApEntityPhysicalName=[OCTET], ApPoeCurConsumPower=[INTEGER], ApPoeConsumPowerThreshold=[INTEGER], APID=[INTEGER])
The total PoE power consumption is greater than or equal to the alarm threshold.
Only the AP4050DN-E, AP4050DN-HD, AP7050DN-E, AP7052DN, AP7152DN, AD9430DN-24, AD9431DN-24X and AD9430DN-12 support this alarm.
Attribute
Alarm ID |
Alarm Severity |
Alarm Type |
---|---|---|
3276800190 |
Warning |
Equipment alarm |
Parameters
Name |
Meaning |
---|---|
OID |
Indicates the MIB object ID of the alarm. |
APMAC |
Indicates the AP's MAC address. |
APName |
Indicates the AP name. |
ApIfIndex |
Indicates the AP interface index. |
ApEntityPhysicalName |
Indicates the AP interface name. |
ApPoeCurConsumPower |
Indicates the current consumed power. |
ApPoeConsumPowerThreshold |
Indicates the power threshold. |
APID |
Indicates the AP ID. |
Impact on the System
If the alarm persists, all the PDs may be powered off because of insufficient power supply.
Possible Causes
The total power consumption of all the PDs is greater than or equal to the alarm threshold.
Procedure
Plan the network according to the system power supply. Increase priorities of important devices to prevent their power from being preempted. If the alarm persists, power off some PDs to ensure system reliability.
Related Information
None
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot