Help Center/ Huawei Qiankun CloudService/ More Documents/ Device Alarm Handling/ V200 LSW Alarms/ ALM-3276800165 AP optical module temperature is too low notify
Updated on 2024-01-25 GMT+08:00

ALM-3276800165 AP optical module temperature is too low notify

Description

WLAN/4/AP_OPTICAL_TEMPERATURE_TOO_LOW:OID [OID] AP optical module temperature is too low notify. (APMAC=[MacAddress], APName=[STRING], ApIfIndex=[INTEGER], Ap Optical Temperature=[INTEGER]°C, ApEntityPhysicalName=[OCTET], APID=[INTEGER])

The temperature of AP's optical module is lower than the lower temperature threshold.

Attribute

Alarm ID

Alarm Severity

Alarm Type

3276800165

Warning

Equipment alarm

Parameters

Name

Meaning

OID

Indicates the MIB object ID of the alarm.

APMAC

Indicates the MAC address of an AP.

APName

Indicates the AP name.

ApIfIndex

Indicates the index of the AP interface on which the optical module is installed.

Only the AD9430DN-24 and AD9431DN-24X support this object.

Ap Optical Temperature

Indicates the temperature of the AP's optical module.

ApEntityPhysicalName

Indicates the name of the AP interface on which the optical module is installed.

Only the AD9430DN-24 and AD9431DN-24X support this object.

APID

Indicates the AP ID.

Impact on the System

None

Possible Causes

The temperature of AP's optical module is lower than the lower temperature threshold.

Procedure

  1. Add service traffic on the AP.

    • If the alarm persists, go to Step 4.
    • If the alarm is cleared, go to Step 5.

  2. Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
  3. End.