ALM-3276800118 AP radio is down notify
Description
WLAN/4/AP_RADIO_DOWN: OID [oid] AP radio is down notify.(APMAC=[OPAQUE], RadioID=[INTEGER], APName=[OCTET], CauseId=[INTEGER], CauseStr=[OCTET], APID=[INTEGER])
A radio was down.
Attribute
Alarm ID |
Alarm Severity |
Alarm Type |
---|---|---|
3276800118 |
Warning |
Equipment alarm |
Parameters
Name |
Meaning |
---|---|
OID |
Indicates the MIB object of the alarm. |
APMAC |
Indicates the MAC address of an AP. |
RadioID |
Indicates the radio ID. |
APName |
Indicates the AP name. |
CauseId |
Indicates the index of the radio disconnection cause. |
CauseStr |
Indicates the cause for a radio failure.
|
APID |
Indicates the AP ID. |
Impact on the System
The services on the STA are interrupted.
Possible Causes
- The radio was shut down as configured.
- The radio was shut down by radio calibration.
- Due to insufficient AP power, the AP works in low-power state.
- The radio was shut down due to a system error.
Procedure
- No action is required when CauseStr is Radio disabled due to command execution.
- No action is required when CauseStr is Radio disabled due to calibration.
- No action is required when CauseStr is The 3GPP base station sends a radio shutdown instruction.
- Check whether the power of the PoE switch connected to the AP is sufficient when CauseStr is Radio disabled due to low power consumption.
- Collect the alarm information, log information, and configuration information, and then contact technical support personnel when CauseStr is Radio disabled due to an error or Unexpected reason.
- End.
Related Information
None
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot