Help Center/ Huawei Qiankun CloudService/ More Documents/ Device Alarm Handling/ V200 LSW Alarms/ ALM-3276800087 The input rate change ratio exceeded the threshold
Updated on 2024-01-25 GMT+08:00

ALM-3276800087 The input rate change ratio exceeded the threshold

Description

IFPDT/4/PORT_INRATECHG: OID [OID] The input rate change ratio exceeded the threshold. (IfIndex=[INTEGER], InterfaceName=[STRING], ThresholdPercent=[INTEGER]%, CurrentStatisticalPeriodRate=[COUNTER64], LastStatisticalPeriodRate=[COUNTER64])

The sudden traffic volume change percentage in the inbound direction of interfaces exceeded the trap threshold.

Attribute

Alarm ID

Alarm Severity

Alarm Type

3276800087

Warning

Quality of service alarm

Parameters

Name

Meaning

OID

Indicates the MIB object ID of the alarm.

IfIndex

Indicates the interface index.

InterfaceName

Indicates the interface name.

ThresholdPercent

Indicates the detection threshold of sudden traffic volume changes.

CurrentStatisticalPeriodRate

Interface rate in the current traffic statistics collection interval.

LastStatisticalPeriodRate

Interface rate in the previous traffic statistics collection interval.

Impact on the System

Packet loss may occur on interfaces.

Possible Causes

The sudden traffic volume change percentage in the inbound direction of interfaces exceeded the trap threshold.

Procedure

  1. Run the display this interface command to view the Input bandwidth utilization field, and check whether the sudden traffic in the inbound direction of interfaces is normal.

    • If so, no action is required.
    • If not, check whether a loop exists on the link.

  2. Collect log information, and contact technical support personnel.