ALM-3276800085 The LPU is powered off
Description
L2IFPPI/4/BOARDPOWEROFF: OID [OID] The LPU is powered off. This LPU only supports the trunks with index 127 or smaller than 127. Delete the trunks with index larger than 127 and power on the LPU. (Index=[INTEGER1], EntityPhysicalIndex=[INTEGER2], PhysicalName="[OCTET]", EntityTrapEntType=[INTEGER3], EntityTrapFaultID=[INTEGER4])
The card was powered off. The card supports only the Eth-Trunk with the index less than or equal to 127. Delete the Eth-Trunk with the index larger than 127, and power on the card.
Attribute
Alarm ID |
Alarm Severity |
Alarm Type |
---|---|---|
3276800085 |
Warning |
environmentalAlarm |
Parameters
Name |
Meaning |
---|---|
OID |
Indicates the MIB object ID of the alarm. |
OCTET |
Indicates the entity name. |
INTEGER1 |
Indicates the instance index. |
INTEGER2 |
Indicates the index of the physical entity. |
INTEGER3 |
Indicates the entity type. |
INTEGER4 |
Indicates the error code. |
Impact on the System
The card cannot be registered.
Possible Causes
The causes are as follows:
Only some cards support Eth-Trunk specification extension. If Eth-Trunk specification extension is configured and there is an Eth-Trunk with the index larger than 127, when you install the card that does not support Eth-Trunk specification (low-specification card), the low-specification card cannot be registered.
Procedure
- Use either of the following methods:
- Remove the low-specification card. For details about the supported cards, see the assign trunk command.
- If the low-specification card must be used, delete the Eth-Trunk with the index larger than 127. For details about the mapping between Eth-Trunk indexes and IDs, see the display trunk index-map command.
- If the alarm is not cleared, contact technical support personnel.
- End.
Related Information
None
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot