ALM-3276800080 The VXLAN-incapable card failed to decapsulate received VXLAN packets
Description
ADPVXLAN/4/NOSUPPENCAPDECAPPKTS(t):OID [OID] The slot does not support to encapsulate and decapsulate VXLAN packets.(Slot=[OCTET1],Vni=[INTEGER],SourceIP=[OCTET2],PeerIP=[OCTET3])
The VXLAN-incapable device failed to decapsulate received VXLAN packets.
Attribute
Alarm ID |
Alarm Severity |
Alarm Type |
---|---|---|
3276800080 |
Warning |
processingErrorAlarm |
Parameters
Name |
Meaning |
---|---|
OID |
Indicates the MIB object ID of the alarm. |
OCTET1 |
Indicates the slot ID. |
INTEGER |
Indicates the VNI ID of VXLAN packets. |
OCTET2 |
Indicates the source VTEP IP address of VXLAN packets. |
OCTET3 |
Indicates the remote VTEP IP address of VXLAN packets. |
Impact on the System
VXLAN service traffic may fail to be forwarded.
Possible Causes
The device does not support VXLAN packet decapsulation.
Procedure
- Run the display arp command to locate the interface receiving VXLAN packets based on the source VTEP IP address in the alarm, and check whether the device where the interface resides supports VXLAN packet decapsulation.
- If so, go to step 3.
- If not, go to step 2.
- Replace the interface with the one supporting VXLAN packet decapsulation, and then check whether the alarm is cleared.
- If so, go to step 4.
- If not, go to step 3.
- Contact technical support personnel.
- End.
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot